How to Install a Starter Motor for a 3.5L Engine on Dodge Challenger?

The installation begins by fitting the starter motor dust shield. After that, place and tighten the starter assembly onto the transmission. Secure the starter using the bolts and bracket for the electrical wiring and fasten them to 54 Nm (40 ft. lbs.). Join the electrical terminal from the starter to the solenoid's terminal and use the battery cable and nut to secure the solenoid stud, ensuring you tighten it to 11 Nm (97 in. lbs.). Afterward, place the left side catalytic converter. Afterwards, attach the negative cable and screw it in place using 5 Nm (45 in. lbs.).

How to Service a Starter Motor on Dodge Challenger?

You should begin the service by unplugging and securing the negative battery cable. Raise the vehicle further and put it on support stands. After that, get rid of the two heat shield nuts and take the heat shield off. Proceed by unscrewing the three starter mounting bolts after the other bolts are out. Support the starter motor well as you move it towards the front, so it doesn't drop onto the wire harness accidentally. Then, undo the bolt that connects the battery cable to the solenoid, pull out the wire from the solenoid stud and remove the starter motor.

OEM Dodge Challenger Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Starter motors found

View related parts
Dodge Challenger Starter Part Number: 56029852AB
$326.75 MSRP: $484.00
You Save: $157.25 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 56029852AA, R6029852AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2023 Dodge Challenger | GT, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Starter Part Number: 4801852AB
$324.48 MSRP: $480.00
You Save: $155.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Replaces: RL801852AB, 4801694AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Challenger | GT, Rallye Redline, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Starter Part Number: 4608801AC
$247.44 MSRP: $366.00
You Save: $118.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4608801AA, 4608801AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Dodge Challenger | R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Shaker, T/A | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Starter Bolt Part Number: 5030076AD
$301.03 MSRP: $457.00
You Save: $155.97 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter; Starter Engine
- Replaces: 5030076AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | 6.2L V8
- 2008-2010 Dodge Challenger | 6.1L V8
View related parts
Dodge Challenger Starter Part Number: 68066177AB
$402.69 MSRP: $611.00
You Save: $208.31 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Replaces: 68066177AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT 392, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A 392, T/A 392 Widebody | 6.2L V8, 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Starter Part Number: 4896464AE
$364.02 MSRP: $552.00
You Save: $187.98 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4896464AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Challenger | R/T, T/A | 8 Cyl 5.7 L GAS
- 2015-2016 Dodge Challenger | 5.7L V8
View related parts
Dodge Challenger Starter Part Number: 5035102AB
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 5035102AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT 392, SRT Hellcat, Scat Pack, Scat Pack 392 Widebody, T/A 392, T/A 392 Widebody | 6.4L V8, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger Starter Motor

Choose OEM Starter Motor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Starter Motor follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Challenger Starter Motor Parts and Q&A

Starter
4608801AC
Q: How to Install a Starter Motor for a 3.5L Engine on Dodge Challenger?
A:
The installation begins by fitting the starter motor dust shield. After that, place and tighten the starter assembly onto the transmission. Secure the starter using the bolts and bracket for the electrical wiring and fasten them to 54 Nm (40 ft. lbs.). Join the electrical terminal from the starter to the solenoid's terminal and use the Battery Cable and nut to secure the solenoid stud, ensuring you tighten it to 11 Nm (97 in. lbs.). Afterward, place the left side Catalytic Converter. Afterwards, attach the negative cable and screw it in place using 5 Nm (45 in. lbs.).
Starter Bolt
5030076AD
Q: How to Service a Starter Motor on Dodge Challenger?
A:
You should begin the service by unplugging and securing the negative Battery Cable. Raise the vehicle further and put it on support stands. After that, get rid of the two heat shield nuts and take the heat shield off. Proceed by unscrewing the three starter mounting bolts after the other bolts are out. Support the starter motor well as you move it towards the front, so it doesn't drop onto the wire harness accidentally. Then, undo the bolt that connects the battery cable to the solenoid, pull out the wire from the solenoid stud and remove the starter motor.