How to Install a Belt Tensioner on a 2.7L Engine on Dodge Charger?

Start by installing the tensioner bolt and finally center the tensioner. Following that, engage the accessory drive belt, while making certain that if you just replaced the belt, the tang on the back of the tensioner is within 6 - 8mm (0.24 - 0.32 in.) of the indexing stop on the tensioner housing. Any belt used for 15 minutes or fewer is still regarded as new. Be sure to look at the belt indexing marks at the end.

How to Service and Repair a Belt Tensioner on a 2.7L Engine on Dodge Charger?

For a 2.7L engine, make sure the accessory drive belt tensioner's tang is sitting around 6 - 8mm (0.24 - 0.32 in.) away from the indexing stop when installing a newly-used belt. Should this criteria not be matched, examine if the wrong belt is fitted, the bearings on engine accessories like the A/C compressor, power steering pump, water pump, idler pulley or generator are worn, the belts were not fastened properly in the grooves, one or more pulleys seem loose, the accessories do not stay aligned or if the routing of the belt is flawed. If the indexing arrow on the tensioner moves to its minimum position, the belt needs to be replaced because the tensioner won't travel any farther. To begin, remove the accessory drive belt, go on to loosen the tensioner assembly bolt and finally lift the tensioner off the mounting bracket. Please note the tensioner assembly needs to be kept whole since the high spring pressure makes it unserviceable apart from the pulley.

OEM Dodge Charger Belt Tensioner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Belt Tensioners found

View related parts
Dodge Charger Belt Tensioner Part Number: 4861660AA
$124.65 MSRP: $188.00
You Save: $63.35 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Accessory/Drive Tensioner; Serpentine Kit; Automatic Pulley; Serpentine Tensioner; Tensioner; Tensioner Belt; Drive Belt Tensioner
- Replaces: 4593817AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2023 Dodge Charger | Base, Daytona, Daytona 392, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Belt Tensioner Part Number: 4892109AA
$145.99 MSRP: $219.00
You Save: $73.01 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Engine Timing Belt Tensioner; Serpentine Belt Drive Kit; Timing Tensioner; Tensioner; Tensioner Belt; Timing Belt Tensioner
- Replaces: 4573347AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, Pursuit, SE, SXT | 6 Cyl 3.5 L GAS
View related parts
Dodge Charger Belt Tensioner Part Number: 5184617AD
$325.17 MSRP: $484.00
You Save: $158.83 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Drive Kit; Automatic Belt Tensioner; Serpentine Tensioner; Tensioner; Tensioner Belt; Accessory Drive Belt Tensioner; Drive Belt Tensioner
- Replaces: 5184617AC, 5184617AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | GT, GT Plus, Pursuit, SE, SXT, SXT Plus, SXT Plus Leather | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Charger Belt Tensioner Part Number: 53011558AA
$269.65 MSRP: $399.00
You Save: $129.35 (33%)
ADD TO CART
Product Specifications
- Other Name: Tensioner - Supercharger Drive Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Drive Kit; Serpentine Tensioner; Tensioner
- Replaces: 68222744AE, 68222744AC, 68222744AB, 68222744AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 6.2L V8, 8 Cyl 6.2 L GAS

Dodge Charger Belt Tensioner

Choose OEM Belt Tensioner that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Belt Tensioner follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Charger Belt Tensioner belongs to the drive belt system of a Dodge Charger and is a widely recognized and appreciated product. This critical part makes it possible to adjust the belt tension and pass the required parameters to the essential units like the alternator and water pump mechanisms. The Dodge Charger Belt Tensioner consist of an assembly that has a pulley, a tensioner arm, spring and the base which work together for the purpose of increasing the efficiency as well as safety of the car. Many a Dodge fan prefers it due to its adaptability across diverse Charger versions, it is compatible with. In the analysis of the Dodge Charger Belt Tensioner, it is vital to take routine checkups for signs of tear or wear as this may causes squeaking noises or frayed belt edges which may affect the performance of the vehicle. This type of automotive belt tensioner is easy to manifest on the market since it is built using a sturdy material that fits the current needs of those cars. Thus, by appropriately adjusting the drive belt tension it contributes to the non-occurrence of the several belt-driven parts' failures and improves driving in general. Given its effectiveness, this Dodge Charger Belt Tensioner shows that Dodge has a focus on providing high-quality and modernized products that are essential for Chargers' performance and durability, hence making it crucial to have if you own this magnificent car.

Dodge Charger Belt Tensioner Parts and Q&A

Belt Tensioner
4861660AA
Q: How to Install a Belt Tensioner on a 2.7L Engine on Dodge Charger?
A:
Start by installing the tensioner bolt and finally center the tensioner. Following that, engage the accessory Drive Belt, while making certain that if you just replaced the belt, the tang on the back of the tensioner is within 6 - 8mm (0.24 - 0.32 in.) of the indexing stop on the tensioner housing. Any belt used for 15 minutes or fewer is still regarded as new. Be sure to look at the belt indexing marks at the end.
Belt Tensioner
4892109AA
Q: How to Service and Repair a Belt Tensioner on a 2.7L Engine on Dodge Charger?
A:
For a 2.7L engine, make sure the accessory Drive Belt tensioner's tang is sitting around 6 - 8mm (0.24 - 0.32 in.) away from the indexing stop when installing a newly-used belt. Should this criteria not be matched, examine if the wrong belt is fitted, the bearings on engine accessories like the A/C compressor, Power Steering Pump, Water Pump, idler pulley or generator are worn, the belts were not fastened properly in the grooves, one or more pulleys seem loose, the accessories do not stay aligned or if the routing of the belt is flawed. If the indexing arrow on the tensioner moves to its minimum position, the belt needs to be replaced because the tensioner won't travel any farther. To begin, remove the accessory drive belt, go on to loosen the tensioner assembly bolt and finally lift the tensioner off the mounting bracket. Please note the tensioner assembly needs to be kept whole since the high spring pressure makes it unserviceable apart from the pulley.