How to Remove and Replace the Serpentine Belt on a 2.7L Engine on Dodge Charger?

Remove and replace the serpentine accessory drive belt on 2.7L engine. Make sure the tensioner arm doesn't snap back to the freearm position or otherwise you may severely damage the tensioner. While turning the belt tensioner counterclockwise to its stop, remove the belt. Then, gradually rotate the tensioner back to the freearm position.

How to Install and Replace the Serpentine Belt on a 2.7L Engine on Dodge Charger?

To replace the serpentine accessory drive belt on the 2.7L engine, first check the condition of all the pulleys. Having the belt set up properly is imperative during mounting; that is to prevent the overheating of the engine due to the water pump spinning the wrong way. The drive belt should be positioned around all pulleys but idler one. Start by turning the tensioner arm to its stop position. Next, route the belt around the idler pulley. Allow the tensioner to rotate into the belt so it is fully seated on all pulleys. When a new belt is being installed, the indexing tang on the back of the tensioner must be approximately 6 - 8mm (0.24 - 0.32 in.) from the indexing stop on the tensioner housing. A belt used for less than 15 minutes is considered new. After fitting, check condition of belt wear indicator.

OEM Dodge Charger Serpentine Belt

Serpentine Drive Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Serpentine Belts found

View related parts
Dodge Charger Serpentine Belt Part Number: 4593685AA
$42.58 MSRP: $63.35
You Save: $20.77 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine; Belt
- Replaced by: 4593685AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, SE | 6 Cyl 2.7 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 55111074AC
$24.19 MSRP: $48.85
You Save: $24.66 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Coolant Recovery Bottle; Engine, Washer, Radiator Caps; Serpentine & V-Belts; Reservoir Cap; Filler Cap; Reservoir Tank Cap; Recovery Tank Cap; Cap
- Replaces: 55111074AA, 4682828, 5017468AA, 55111074AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1987 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 1.6 L GAS, 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 53011324AA
$346.97 MSRP: $524.00
You Save: $177.03 (34%)
ADD TO CART
Product Specifications
- Other Name: Belt - Supercharger Drive; Accessory Drive Belt; Supercharger Belt; Belt Supercharger Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2023 Dodge Charger | SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 8 Cyl 6.2 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 68495977AA
$49.21 MSRP: $66.70
You Save: $17.49 (27%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53013676AB, 53013676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | Daytona, Daytona 392, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392 | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 4861928AA
$45.70 MSRP: $65.70
You Save: $20.00 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Charger | GT, GT Plus, Pursuit, SE, SXT, SXT Plus, SXT Plus Leather | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 68207171AD
$46.46 MSRP: $67.00
You Save: $20.54 (31%)
Product Specifications
- Other Name: Belt - Supercharger Drive; Accessory Drive Belt; Serpentine Belt Drive Kit; V-Belt; Supercharger Belt; Belt Supercharger Drive; Drive Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 8 Cyl 6.2 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 5184647AB
$45.70 MSRP: $65.70
You Save: $20.00 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Charger | Pursuit, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 4627031AA
$35.32 MSRP: $50.70
You Save: $15.38 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Dodge Charger | SRT8 | 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 5038725AA
$48.60 MSRP: $69.85
You Save: $21.25 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 8 Cyl 6.2 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 4593684AA
$57.39 MSRP: $84.40
You Save: $27.01 (32%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 4861322AC, 68060352AA, 4892840AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2011 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SXT | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Serpentine Belt Part Number: 5037542AA
$80.10 MSRP: $118.00
You Save: $37.90 (33%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine; Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Pursuit, SE, SRT8, SXT | 6 Cyl 3.5 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Belt Tensioner Part Number: 53011558AA
$114.43 MSRP: $169.00
You Save: $54.57 (33%)
Product Specifications
- Other Name: Tensioner - Supercharger Drive Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Drive Kit; Serpentine Tensioner; Tensioner
- Replaced by: 68617113AA
- Replaces: 68222744AE, 68222744AC, 68222744AB, 68222744AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 8 Cyl 6.2 L GAS
View related parts
Dodge Charger Alternator Belt Part Number: Q4040412
Product Specifications
- Other Name: Belt, Alternator & Water Pump Drive; Serpentine Belt Drive Kit; Serpentine Belt; Drive Belt; V-Belt; Power Steering Belt; A/C Belt; Water Pump Belt; Alternator & Power Steering Pump Drive 71.65"
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1985-1987 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 2.2 L GAS
View related parts
Dodge Charger A/C Belt Part Number: B0015475
Product Specifications
- Other Name: Belt, A/C. Compressor Drive W/2.2L Engine; Belt; Belt, A/C Drive 47.80" Oversize Length (B0015475); Belt, Air Condition Drive; Belt, A/C Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987 Dodge Charger | Base, Shelby | 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Drive Belt Part Number: B0013431AB
Product Specifications
- Other Name: Belt - Power Steering; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Alternator Belt; Fan Belt; Power Steering Belt; Belt
- Replaces: JY013431, JY013432, B0013431
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1987 Dodge Charger | 2.2, Base, Shelby | 1.6L L4, 2.2L L4, 4 Cyl 2.2 L GAS

Dodge Charger Serpentine Belt

Choose OEM Serpentine Belt that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Serpentine Belt follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Serpentine Belt in a Dodge Charger produces engine power, impacting multiple belt-driven components and systems. The belt is a single loop that winds around several pulleys for alternator, power steering pump, air conditioners compressor and water pump, allowing the crankshaft to drive all devices. The Serpentine Belt is guided by idler pulleys and an automatic tensioner to ensure good contact and minimize slipping, allowing for a more compact setup compared to older multi-belt systems. The Dodge lineup has this advantage on a broader scale. Within the Dodge powertrain layout, this configuration simplifies mounting of the belt-driven components, and on the Charger engine the single belt path simplifies under-hood packaging. The engine's Serpentine Belt spins constantly under load and heat. As it wears over time, a break can cause loss of cooling, steering assist, battery charging, and cabin climate control, causing the vehicle to become inoperable. Checks to look for cracks, fraying or glazing are visual in certain engines, the use of Serpentine Belt adds an extra layer of reliability. However, if one belt breaks, the linked components will still stop working. Regular awareness of the belt condition is necessary for any Charger driver and a sound belt is critical for every Dodge Charger belt-drive system that relies on Serpentine Belt motion.

Dodge Charger Serpentine Belt Parts and Q&A

Serpentine Belt
4593685AA
Q:
How to Remove and Replace the Serpentine Belt on a 2.7L Engine on Dodge Charger?
A:
Remove and replace the serpentine accessory drive belt on 2.7L engine. Make sure the tensioner arm doesn't snap back to the freearm position or otherwise you may severely damage the tensioner. While turning the belt tensioner counterclockwise to its stop, remove the belt. Then, gradually rotate the tensioner back to the freearm position.
Serpentine Belt
4593684AA
Q:
How to Install and Replace the Serpentine Belt on a 2.7L Engine on Dodge Charger?
A:
To replace the serpentine accessory drive belt on the 2.7L engine, first check the condition of all the pulleys. Having the belt set up properly is imperative during mounting; that is to prevent the overheating of the engine due to the Water Pump spinning the wrong way. The drive belt should be positioned around all pulleys but idler one. Start by turning the tensioner arm to its stop position. Next, route the belt around the idler pulley. Allow the tensioner to rotate into the belt so it is fully seated on all pulleys. When a new belt is being installed, the indexing tang on the back of the tensioner must be approximately 6 - 8mm (0.24 - 0.32 in.) from the indexing stop on the tensioner housing. A belt used for less than 15 minutes is considered new. After fitting, check condition of belt wear indicator.