How to Install a Driveshaft Center Support Bearing on Dodge Charger?

Hold the rear segment in a press and position it so the joint yoke is supporting it. After that, insert the Driveshaft Center Support Bearing where shown and use installer C-4735-1 to force the Driveshaft Center Support Bearing onto the shaft. After the propeller shaft is removed from the press, join the boot to the rear shaft part. The "skip-tooth" design is used in the propeller shaft spline interface to allow proper alignment and thus avoid imbalance. Match the lines from the initial assembly and then connect the front and rear segments. Afterward, fit the boot over the front part, place it properly into the groove and then insert the propeller shaft in the vehicle.

OEM Dodge Charger Driveshaft Center Support Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Driveshaft Center Support Bearing found

View related parts
Dodge Charger Center Bearing Part Number: 5161435AA
$364.11 MSRP: $534.00
You Save: $169.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Drive Shaft; Drive Shaft Center Support Bearing; Driveshaft Center Support Bearing; Bearing Drive Shaft
- Replaces: 5142476AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2014 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT, SXT Plus | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS

Dodge Charger Driveshaft Center Support Bearing

Choose OEM Driveshaft Center Support Bearing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Driveshaft Center Support Bearing follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Charger Driveshaft Center Support Bearing Parts and Q&A

Center Bearing
5161435AA
Q: How to Install a Driveshaft Center Support Bearing on Dodge Charger?
A:
Hold the rear segment in a press and position it so the joint yoke is supporting it. After that, insert the Driveshaft Center Support Bearing where shown and use installer C-4735-1 to force the Driveshaft Center Support Bearing onto the shaft. After the propeller shaft is removed from the press, join the boot to the rear shaft part. The "skip-tooth" design is used in the propeller shaft spline interface to allow proper alignment and thus avoid imbalance. Match the lines from the initial assembly and then connect the front and rear segments. Afterward, fit the boot over the front part, place it properly into the groove and then insert the propeller shaft in the vehicle.