How to Install an Oil Pressure Switch on Dodge Charger?

Fill the sensor threads with Mopar(R) Sealer and screw in the oil pressure switch, using part number 1 for the sensor. After attaching the switch, hook up the electrical connector, lower the car and turn it on to look for leaks. At the end, measure the engine oil and top it up when needed.

How to service an Oil Pressure Switch on Dodge Charger?

The first step in servicing the oil pressure sensor is to raise your car on a hoist and take away the lower splash shield. Detach the electrical connector from the oil pressure switch 1 and put an oil collecting container beneath the switch. Bolts should be removed and the switch taken out from the engine block. Before you insert the switch, thread Mopar Thread Sealant onto the switch threads and install switch 1 before putting back the electrical connector. Set your car at the wanted level, start the engine, check for any leaks and check the oil level, adjusting it if needed.

OEM Dodge Charger Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Oil Pressure Switches found

View related parts
Dodge Charger Oil Pressure Sensor Part Number: 68295556AA
$68.74 MSRP: $105.00
You Save: $36.26 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Pressure Switch; Different engine plants used various oil filter adapter assemblies. Refer to Illustration 105.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2019 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Scat Pack, SRT 392, SRT Hellcat, SXT, SXT Plus, SXT Plus Leather | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2017 Dodge Charger | Daytona, Daytona 392, Daytona R/T, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Oil Pressure Sensor Part Number: 68334877AA
$58.04 MSRP: $86.75
You Save: $28.71 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oil Pressure; Engine Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sensor Oil Pressure; Oil Pressure Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2023 Dodge Charger | GT, Pursuit, R/T, SRT Hellcat, SXT, Scat Pack | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Oil Pressure Sending Unit Part Number: 4267021
$3.55 MSRP: $4.50
You Save: $0.95 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch; Switch, Oil Pressure W/2.2 Engine 3 Terminal; W/Gauge options available.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984 Dodge Charger | 2.2 | 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Oil Pressure Sending Unit Part Number: 4051686
$18.88 MSRP: $23.94
You Save: $5.06 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Unit Oil Pressure Sending; Switch, Oil Pressure T.B.I. & Turbo, 1 Terminal; Sending Unit, Oil Pressure; Wiring, Headlamp & Dash.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987 Dodge Charger | Base, Shelby | 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, Pursuit, SE, SXT | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Charger Oil Pressure Sending Unit Part Number: 4221673
Product Specifications
- Other Name: Switch Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch, Oil Pressure T.B.I. & Turbo, 1 Terminal; various oil pressure switches and controls.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987, 1985 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Oil Pressure Sending Unit Part Number: 4397891AB
Product Specifications
- Other Name: Switch; Engine Oil Pressure Switch; Oil Pressure Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1986 Dodge Charger | 2.2, Shelby | 4 Cyl 2.2 L GAS

Dodge Charger Oil Pressure Switch

Choose OEM Oil Pressure Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oil Pressure Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Charger Oil Pressure Switch is an important component that reflects on the sturdiness as well as capability of related Dodge Charger automobiles. This switch is used to regulate oil pressure with microphone like features that sends signals to drivers each time the oil pressure level changes from the normal level hence preserving the engine from possible damages. The Dodge Charger has had changes of models where different models were equipped differently in terms of Oil Pressure Switch where different models offered improved accuracy and efficiency in monitoring the oil pressure. Such versatility has made the Dodge Charger to be a generation car that is attributed to durability and performance. Reliability for Chargers is further guaranteed because the Oil Pressure Switch can fit in various models; thus, maximizing the efficiency and safety of the vehicle. Even more, the Dodge Charger Oil Pressure Switch covers several mechanisms that enhance the level of response; therefore, it is considered as one of the best in the market for automobiles. The real-time feedback of oil pressure included not only improves the vehicle's functioning and optimal performance but also increases road safety due to the potential risk of an engine failure. As the new models of the Dodge Charger are being developed, the role of the Oil Pressure Switch does not diminish in any way, thus this car continues to be an emblem of powerful automobiles. Thus, the Dodge Charger Oil Pressure Switch can be considered as one of the most essential components for Charger because of the combination of reliability, effectiveness, and safety.

Dodge Charger Oil Pressure Switch Parts and Q&A

Switch - Oil Pressure
5149098AB
Q: How to Install an Oil Pressure Switch on Dodge Charger?
A:
Fill the sensor threads with Mopar(R) Sealer and screw in the oil pressure switch, using part number 1 for the sensor. After attaching the switch, hook up the electrical connector, lower the car and turn it on to look for leaks. At the end, measure the engine oil and top it up when needed.
Oil Pressure Sensor
5149062AB
Q: How to service an Oil Pressure Switch on Dodge Charger?
A:
The first step in servicing the oil pressure sensor is to raise your car on a hoist and take away the lower splash shield. Detach the electrical connector from the oil pressure switch 1 and put an oil collecting container beneath the switch. Bolts should be removed and the switch taken out from the engine block. Before you insert the switch, thread Mopar Thread Sealant onto the switch threads and install switch 1 before putting back the electrical connector. Set your car at the wanted level, start the engine, check for any leaks and check the oil level, adjusting it if needed.