How to remove a Sway Bars on Dodge Charger?

Raise and support the car before starting to remove the front sway bar kit. Following this, take out the belly pan. After that, on both sides of the car, undo the screws holding the sway bar kit heat shield in place and remove it. Afterward, open the bolts that hold the sway bar kit isolator retainer on each side. Take the two halves of the retainer out from the sway bar kit isolator. Grab one isolator with the slit and then remove it from the sway bar kit. On both sides of the car, unscrew the nut securing the sway bar link to the kit, slide the ball joint out of the kit and then take the kit off the car.

How to Install a Sway Bars on a Rear-Wheel-Drive for Front on Dodge Charger?

Before fitting a front sway bar kit to a rear-wheel-drive vehicle, make sure the sway bar link ball joint stem faces toward the engine cradle. Secure the sway bar link to the bar and slide the ball joint stem inside the sway bar through the hole. For now, loosely put the nut on. As the shape of the sway bar isolators is important, hold each one in place on the bar by slipping the slit between the isolator pin and the locating collar, so that the slit faces the back of the car. Subsequently, place each sway bar isolator retainer half around its related isolator on both sides and tighten the bolts to 60 Nm or 44 ft. lbs. Set the sway bar heat shield inside the isolator retainer and attach it to the steering knuckle with mounting screws. After holding the stem in place, tighten both nuts at each end of the bar to 128 Nm (95 ft. lbs.). At the end, attach the belly pan and bring the auto down to the ground.

OEM Dodge Charger Sway Bars

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Sway Bars found

View related parts
Dodge Charger Stabilizer Bar, Rear Part Number: 4782873AB
$102.76 MSRP: $154.00
You Save: $51.24 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension; Bar Rear Sway
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2015 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Rear Part Number: 68184225AA
$63.76 MSRP: $140.00
You Save: $76.24 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Rear Part Number: 68046012AA
$79.57 MSRP: $168.00
You Save: $88.43 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 68184221AB
$188.44 MSRP: $285.00
You Save: $96.56 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 68184221AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 68184224AA
$258.57 MSRP: $395.00
You Save: $136.43 (35%)
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Charger | GT, GT Plus, Pursuit, R/T, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 68184222AB
$122.65 MSRP: $184.00
You Save: $61.35 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 68184222AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 68207827AA
$217.43 MSRP: $329.00
You Save: $111.57 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Rear Part Number: 4782871AB
$60.84 MSRP: $89.50
You Save: $28.66 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Sway; Suspension Stabilizer Bar, Rear; Sway Bar; Bar Rear Sway
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Stabilizer Bar, Rear Part Number: 5180016AA
$114.38 MSRP: $169.00
You Save: $54.62 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension; Bar Rear Sway
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Charger | Pursuit, R/T, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Stabilizer Bar, Rear Part Number: 4782874AB
$102.14 MSRP: $118.00
You Save: $15.86 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 4782950AC
$135.96 MSRP: $155.00
You Save: $19.04 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Rear Part Number: 4782872AB
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension; Bar Rear Sway
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 4782541AC
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 4782541AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 4782544AC
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 4782544AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2014 Dodge Charger | 2.7L V6, 3.5L V6, 5.7L V8, 6.1L V8
View related parts
Dodge Charger Stabilizer Bar, Rear Part Number: 68184226AA
$137.09 MSRP: $203.00
You Save: $65.91 (33%)
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Rear Part Number: 68184227AA
$150.69 MSRP: $224.00
You Save: $73.31 (33%)
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 68184223AB
$239.06 MSRP: $354.00
You Save: $114.94 (33%)
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 68184223AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 68206426AA
$303.64 MSRP: $451.00
You Save: $147.36 (33%)
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Charger | GT, GT Plus, Pursuit, SE, SXT | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 4782543AC
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 4782543AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2014 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT, SXT Plus | 3.5L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
- 2006-2007 Dodge Charger | 2.7L V6, 3.5L V6, 5.7L V8
View related parts
Dodge Charger Stabilizer Bar, Front Part Number: 4782950AB
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front; Bar Front Sway
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Charger | Base, Pursuit, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

Dodge Charger Sway Bars

Choose OEM Sway Bars that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Sway Bars follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Charger Sway Bars Parts and Q&A

Stabilizer Bar, Rear
4782873AB
Q:
How to remove a Sway Bars on Dodge Charger?
A:
Raise and support the car before starting to remove the front sway bar kit. Following this, take out the belly pan. After that, on both sides of the car, undo the screws holding the sway bar kit heat shield in place and remove it. Afterward, open the bolts that hold the sway bar kit isolator retainer on each side. Take the two halves of the retainer out from the sway bar kit isolator. Grab one isolator with the slit and then remove it from the sway bar kit. On both sides of the car, unscrew the nut securing the sway bar link to the kit, slide the ball joint out of the kit and then take the kit off the car.
Stabilizer Bar, Rear
4782871AB
Q:
How to Install a Sway Bars on a Rear-Wheel-Drive for Front on Dodge Charger?
A:
Before fitting a front sway bar kit to a rear-wheel-drive vehicle, make sure the sway bar link ball joint stem faces toward the engine cradle. Secure the sway bar link to the bar and slide the ball joint stem inside the sway bar through the hole. For now, loosely put the nut on. As the shape of the sway bar isolators is important, hold each one in place on the bar by slipping the slit between the isolator pin and the locating collar, so that the slit faces the back of the car. Subsequently, place each sway bar isolator retainer half around its related isolator on both sides and tighten the bolts to 60 Nm or 44 ft. lbs. Set the sway bar heat shield inside the isolator retainer and attach it to the steering knuckle with mounting screws. After holding the stem in place, tighten both nuts at each end of the bar to 128 Nm (95 ft. lbs.). At the end, attach the belly pan and bring the auto down to the ground.