To begin, clean each component of the brake and inspect it to remove and replace the rear brake shoes. Apply high temperature grease or Lubriplate wherever the brake shoe contacts the support plate, and grease or Lubriplate the adjuster screw socket, nut, button and screw thread surfaces. The parking brake lever is mounted on the rear shoe and secured with its hold down clip. After that, install the adjuster strut on the shoes and parking brake lever. Place the front shoe on the support plate, and secure it using the hold down clip. Put the adjuster spring and lever(4) in the slot of the adjuster strut(7), and fix the lower return spring(1) to the shoes(3). To check the adjuster operation, pull the shoes both outward so that the adjuster lever is moved and engages with the star wheel teeth. Use brake gauge to adjust brake shoes to drum and install wheel and tire assembly.