How to Maintain and Fix a Wiper Arm on Dodge Dakota?

To work on the wiper arm, start by opening the vehicle's hood. Gently lift off the plastic cap from the nut at the end of the wiper arm and then remove that nut from the wiper pivot. A battery terminal puller is the best way to separate the wiper arm from the wiper pivot. To install, the wiper motor should be in Park position and the arm and blade mount when the front and rear edges of the blade match the hidden wiper lines in the upper blacked-out part of the lower windshield, within a ± 5.9 mm (± 0.23 in.) tolerance. Screw the wiper arm pivot nuts carefully until they reach 24 Nm (212 in. lbs.) torque. After setting up the wipers, operate them with wet windshield glass, turn the wiper switch off and make any adjustments you see are needed. The next step is to place plastic nut caps onto the wiper arm pivot nuts.

How to Remove and Install a Wiper Arm on Dodge Dakota?

To remove the wiper arm, hold it backwards over the glass and open the vehicle's hood. Carefully take off the plastic nut cap on the wiper pivot and then unscrew the nut holding the wiper arm on the pivot shaft. Remove the wiper arm from the wiper pivot end and from the wiper pivot splines by using a suitable battery terminal puller. After you park the wiper pivots, turn the ignition to ON, then move the multi-function switch knob to OFF; if the switch is flashing, wait for the wipers to move until they stop before turning the ignition off again. Position the wiper arm ends over the pivot on the wiper motor so that the lowest part of the blade lines up with the wiper alignment marks hidden in the upper black area near the bottom of the windshield - it should be around 15 mm (± 0.59 in). After the arm and shaft are lined up, relieve the spring tension by lifting the arm upward slightly and push the pivot on the arm down over the wiper pivot shaft. Screw the nut that joins the wiper arm to the wiper pivot shaft tightly to 23.7 Nm (210 in. lbs.). Wet the windshield glass, make the wipers go, switch the wiper switch to OFF and check if the wiper arms are in the right place, fixing them if they are not. The last step is to screw the plastic nut cap back onto the pivot nut of the wiper arm.

OEM Dodge Dakota Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Wiper Arms found

View related parts
Dodge Dakota Wiper Arm, Driver Side Part Number: 55154897AD
$74.89 MSRP: $98.70
You Save: $23.81 (25%)
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Wiper
- Position: Driver Side
- Replaces: 55154897AB, 55154897AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2007 Dodge Dakota | Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 2.5L L4, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Wiper Arm, Front Passenger Side Part Number: 55154854AF
$71.19 MSRP: $107.00
You Save: $35.81 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Left, Right; Front Arm; Arm Front Wiper; Arm Wiper
- Position: Front Passenger Side
- Replaces: 55154854AB, 55154854AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2010 Dodge Dakota | Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Wiper Arm Part Number: WBFLAT03AA
$7.36 MSRP: $9.34
You Save: $1.98 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade - Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Dakota | Laramie, SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Wiper Motor Part Number: 4389131
$264.95 MSRP: $335.87
You Save: $70.92 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Windshield Wiper; Front Motor; Motor; Motor, W/Bracket, Wiper; Motor, Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1996 Dodge Dakota | Base, LE, S, SE, SLT, Shelby, Sport, WS | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Wiper Arm, Front Driver Side Part Number: 55154897AE
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Left; Arm Front Wiper
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
View related parts
Dodge Dakota Wiper Motor Part Number: 55154863AI
Product Specifications
- Other Name: Pivot - Windshield Wiper; Windshield Wiper Motor; Motor & Linkage; Front Motor; Motor And Linkage Windshield Wiper
- Replaces: 55154863AC, 55154863AE, 55154863AH, 55154863AG, 55154863AF, 55154863AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2010 Dodge Dakota | Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 2.5L L4, 3.7L V6, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Arm, Black Part Number: 55076533
Product Specifications
- Other Name: Arm Wiper - Windshield Wiper (Black); Wiper Arm
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1996 Dodge Dakota | Base, LE, S, SE, SLT, Shelby, Sport, WS | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Wiper Motor Part Number: 55154863AB
Product Specifications
- Other Name: Pivot - Windshield Wiper; Windshield Wiper Motor; Front Motor; Motor Windshield Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Dakota Wiper Arm

Choose OEM Wiper Arm that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wiper Arm follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Dakota Wiper Arm is one of the crucial parts of the car which, once damaged, affects the car's reliability and efficiency, particularly in the areas of visibility during the raining season. This Wiper Arm is basically the link between the wiper blades and the motor and turns the rotation of the motor into swishing movements that wipes the rain, snow and anything else from the windshield. In response to the Dodge Dakota models produced from 1986 to 2010, the Wiper Arm ensures productivity and safety to guarantee that any driver can confidently continue his or her trip regardless of the weather conditions. The Chrysler Wiper Arm also referred to as the Dodge Dakota Wiper Arm is unique in the automotive market since it is sturdy and well-engineered to make it durable. It makes sure that the driver has a clear view and at the same time it cuts on the usage of wiper blades, thus using them longer. Besides, the design of the Wiper Arm enhances its ability to fit the wiper link assembly to ensure the premier experience while driving. The Dodge Dakota has gained recognition for the fusion of size and power, something that the Wiper Arm helps to complement due to the available clear visibility at all times. Due to its effectiveness, the Dodge Dakota Wiper Arm is a representative example of the brand's devotion to quality and performance, it should become an important component of the Dodge Dakota collection.

Dodge Dakota Wiper Arm Parts and Q&A

Wiper Arm, Front Passenger Side
55154854AF
Q: How to Maintain and Fix a Wiper Arm on Dodge Dakota?
A:
To work on the wiper arm, start by opening the vehicle's hood. Gently lift off the plastic cap from the nut at the end of the wiper arm and then remove that nut from the Wiper Pivot. A battery terminal puller is the best way to separate the wiper arm from the wiper pivot. To install, the Wiper Motor should be in Park position and the arm and blade mount when the front and rear edges of the blade match the hidden wiper lines in the upper blacked-out part of the lower Windshield, within a ± 5.9 mm (± 0.23 in.) tolerance. Screw the wiper arm pivot nuts carefully until they reach 24 Nm (212 in. lbs.) torque. After setting up the wipers, operate them with wet windshield glass, turn the Wiper Switch off and make any adjustments you see are needed. The next step is to place plastic nut caps onto the wiper arm pivot nuts.
Wiper Arm, Driver Side
55154897AD
Q: How to Remove and Install a Wiper Arm on Dodge Dakota?
A:
To remove the wiper arm, hold it backwards over the glass and open the vehicle's hood. Carefully take off the plastic nut cap on the Wiper Pivot and then unscrew the nut holding the wiper arm on the pivot shaft. Remove the wiper arm from the wiper pivot end and from the wiper pivot splines by using a suitable battery terminal puller. After you park the wiper pivots, turn the ignition to ON, then move the multi-function switch knob to OFF; if the switch is flashing, wait for the wipers to move until they stop before turning the ignition off again. Position the wiper arm ends over the pivot on the Wiper Motor so that the lowest part of the blade lines up with the wiper alignment marks hidden in the upper black area near the bottom of the windshield - it should be around 15 mm (± 0.59 in). After the arm and shaft are lined up, relieve the spring tension by lifting the arm upward slightly and push the pivot on the arm down over the wiper pivot shaft. Screw the nut that joins the wiper arm to the wiper pivot shaft tightly to 23.7 Nm (210 in. lbs.). Wet the windshield glass, make the wipers go, switch the Wiper Switch to OFF and check if the wiper arms are in the right place, fixing them if they are not. The last step is to screw the plastic nut cap back onto the pivot nut of the wiper arm.