How Should Brake Drums Be Machined on a Drum Lathe on Dodge Durango?

Brake drums are machined with a drum lathe when required and they should not be allowed to cool until the first cut is done, remaining between 0.12 to 0.20 mm (0.006 to 0.008 inch). For best results, final finish cuts of 0.025 to 0.038 mm (0.001 to 0.0015 inch) should be performed. Place the drum securely on the lathe before machining and cover it with a damper strap to avoid any vibration and to finish the job chatter free. A value for the maximum diameter of the drum brake surface is stamped or cast on the outside edge of the drum; if machining would take it beyond this diameter, the drum must be replaced.

OEM Dodge Durango Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Drum found

View related parts
Dodge Durango Drum, Rear Part Number: 52009595AC
$114.14 MSRP: $208.00
You Save: $93.86 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum Brake; Brake Drum
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Durango Brake Drum

Choose OEM Brake Drum that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Drum follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Drum is one of the many parts that make up the braking system and it has gained a reputation for being dependable and efficient in its functionality with regards to different Dodge Durango models. Intended to act as an abrasive surface which engages the brake shoes with the drum, this Brake Drum plays the role of making sure that speed is regulated or ceased, making car travel safe and smooth. Generally made of heat resilient and wear resistant cast iron the Brake Drum consists of the wheel and axle to create the acceptable friction when brakes are applied. This process is very important especially for mid-size sports utility vehicle the Durango that has gone through a drastic change after its inception in the Assembly year of 1998. Another advantage of the Brake Drum is that it has been designed to fit the diverse Durango generations hence making it capable of fitting in various Durango models, be it a V6 or the V8 models, not forgetting the R/T version. The brake drum of Dodge Durango contributes to the automaker's competitive edge because of its heat and friction resistant features for optimized braking regardless of the nature of the drive. Further, the Brake Drum supports the functionality of the Durango for developed performance and progressive braking system that the drivers can feel. Safe as well as sturdy, the brake drum is one of the most important features that define the quality of a car and its capacity to perform under pressure; therefore, the Brake Drum is indispensable for any Durango owner who aims for reliability on the road.

Dodge Durango Brake Drum Parts and Q&A

Drum, Rear
52009595AC
Q: How Should Brake Drums Be Machined on a Drum Lathe on Dodge Durango?
A:
Brake drums are machined with a drum lathe when required and they should not be allowed to cool until the first cut is done, remaining between 0.12 to 0.20 mm (0.006 to 0.008 inch). For best results, final finish cuts of 0.025 to 0.038 mm (0.001 to 0.0015 inch) should be performed. Place the drum securely on the lathe before machining and cover it with a damper strap to avoid any vibration and to finish the job chatter free. A value for the maximum diameter of the drum brake surface is stamped or cast on the outside edge of the drum; if machining would take it beyond this diameter, the drum must be replaced.