How to Remove the EGR Valve and Solenoid Assembly from the Engine on Dodge Durango?

The electronic EGR valve and its solenoid are mounted behind the left cylinder head. First, take out the plastic windshield cowl panel and afterward, remove the windshield wiper motor. The EGR valve is attached to the engine intake manifold by an exhaust gas routing tube; remove the bolts that secure it at this point. After that, remove the tube from the solenoid and push the other end into the open side of the intake manifold. Take out the gasket between the EGR valve solenoid and tube flange and afterward break the electrical connection at the solenoid. Following that, remove the mounting bolts from both EGR valve solenoids and remove the solenoid assembly from under the hood. Remove the last part: the gasket found underneath the EGR solenoid.

How to Install an EGR Valve on Dodge Durango?

Wipe clean the surface near the back of the left cylinder head where the EGR valve is placed and where the EGR routing tube connects. After that, set a new gasket between the EGR valve and the cylinder head and mount the EGR valve onto the cylinder head using the retainers at 9 Nm (80 in. lbs.). Now, put a new gasket between the EGR routing tube flange and the EGR valve assembly, line up the tube with the side of the valve and insert the end into the intake manifold. Secure the retainers to 11 Nm (9 ft. lbs). Link the EGR valve solenoid with the electrical connector next and then put in the windshield wiper motor and plastic cowl panel onto the hood. Make sure to fix the negative ground cable connection and after that use a diagnostic scan tool to clear any earlier DTC's (Diagnostic Trouble Codes).

OEM Dodge Durango EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 EGR Valves found

View related parts
Dodge Durango EGR Valve Part Number: 53034192AB
$292.31 MSRP: $434.00
You Save: $141.69 (33%)
ADD TO CART
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve; Valve EGR
- Replaces: 53034192AA, 53032948AD, 53032948AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Durango | SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Durango EGR Valve Part Number: 53034058AC
$174.48 MSRP: $260.00
You Save: $85.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve
- Replaces: 53032776AD, 53034058AA, 53032776AF, 53034054AA, 53032776AE, 53034058AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Durango | Adventurer, Limited, SLT, ST, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango EGR Valve Part Number: 53032509AN
$352.91 MSRP: $495.00
You Save: $142.09 (29%)
ADD TO CART
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve; Exhaust Gas Recirculation Valve
- Replaces: 53032509AI, 53032509AF, 53032209AE, 53032509AJ, 53032509AM, 53032509AL, 53032509AG, 53032509AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Valve - EGR Part Number: CNHNX631AA
$57.05 MSRP: $83.95
You Save: $26.90 (33%)
ADD TO CART
Product Specifications
- Other Name: VALVE-EGR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, SLT, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango EGR Valve Part Number: 5281256AH
$193.74 MSRP: $287.00
You Save: $93.26 (33%)
Product Specifications
- Other Name: Valve - EGR
- Replaces: 5281256AG, 5281256AE, 5281256AD, 5281256AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, SXT, SXT Plus, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango EGR Valve Part Number: 5192090AC
$377.85 MSRP: $554.00
You Save: $176.15 (32%)
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve
- Replaces: 5192090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)

Dodge Durango EGR Valve

Choose OEM EGR Valve that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each EGR Valve follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The EGR Valve is a very important component of Dodge Durango vehicles in regard to cutting down nitrogen oxide (NOx) emissions through the circulation of exhaust gas back into the combustion chamber. This process also assists in reducing peak combustion temperature and subsequently cutting on the production of damaging pollutants. The Dodge Durango EGR Valve works with an important function of handling the amount of exhaust gases that are required for the engine's efficiency as well as in sticking with the set emissions standards. The concept of Dodge Durango EGR Valve has developed from simpler, orifice techniques to more progressive valves that act on a variety of engine parameters that include coolant temperature, as well as manifold vacuum, among others. Some of latest engines may not contain an EGR valve, for instance, the Chrysler Pentastar 3.6 may not comprise an EGR Valve due to evolution in engine manufacturing. This is the reason that Maintenance is considerable, an EGR Valve may be choked up by carbon and need to be rid of the carbon by cleaning or replacing in order to avoid the issues such as rough idle or misfire.

Dodge Durango EGR Valve Parts and Q&A

EGR Valve
53032509AN
Q: How to Remove the EGR Valve and Solenoid Assembly from the Engine on Dodge Durango?
A:
The electronic EGR valve and its solenoid are mounted behind the left cylinder head. First, take out the plastic windshield cowl panel and afterward, remove the windshield Wiper Motor. The EGR valve is attached to the engine Intake Manifold by an exhaust gas routing tube; remove the bolts that secure it at this point. After that, remove the tube from the solenoid and push the other end into the open side of the intake manifold. Take out the gasket between the EGR valve solenoid and tube flange and afterward break the electrical connection at the solenoid. Following that, remove the mounting bolts from both EGR valve solenoids and remove the solenoid assembly from under the hood. Remove the last part: the gasket found underneath the EGR solenoid.
EGR Valve
53034192AB
Q: How to Install an EGR Valve on Dodge Durango?
A:
Wipe clean the surface near the back of the left cylinder head where the EGR valve is placed and where the EGR routing tube connects. After that, set a new gasket between the EGR valve and the cylinder head and mount the EGR valve onto the cylinder head using the retainers at 9 Nm (80 in. lbs.). Now, put a new gasket between the EGR routing tube flange and the EGR valve assembly, line up the tube with the side of the valve and insert the end into the Intake Manifold. Secure the retainers to 11 Nm (9 ft. lbs). Link the EGR valve solenoid with the electrical connector next and then put in the windshield Wiper Motor and plastic cowl panel onto the hood. Make sure to fix the negative ground cable connection and after that use a diagnostic scan tool to clear any earlier DTC's (Diagnostic Trouble Codes).