Service work on the steering wheel should start by switching off and removing the driver's side
Air Bag. Take out part of bolt 2 so it's no longer attached and leave it in the column. Put puller CJ98-1 on top of the bolt, then push using the end of the tool. First, remove bolt 2 and then take out steering wheel 1. During installation, replace bolt 2 with a new one and place the spline found on the steering wheel hub against the shaft of the steering column. Hook the steering wheel 1 onto the column 4, securing with the bolt to prevent abnormal
Clock Spring workings. Add bolt 2 and secure it up to 61 Nm (45 ft. lbs.), after which you must put the driver's side air bag on the steering wheel 1.