What Are the Key Factors to Consider When Repairing Brake Lines on Dodge Grand Caravan?

Whenever repairing brake lines or flex hoses, ensure you are using anti-corrosion fasteners to hold the clips or hoses to the front suspension cradle, as the cradle is made with aluminum. You should use only Mopar fasteners with the proper anti-corrosion coating if the original ones must be replaced. Only 4.75 mm (3/16 inch) double wall steel tubes with an Al-rich/ZW-AC alloy coatings and matching tube nuts are suitable for hydraulic brake tube replacement. In vehicles having traction control, both the primary and secondary hydraulic tubes between the master cylinder and the hydraulic control unit should be 6 mm (15/64 inch) and should be covered with Al-rich/ZW-AC alloy. All tubes should be protected from kinking by proper bending and flaring and they should not be put against sharp sides, moving parts or in hot areas, while insuring all retention clip types are used. Only original factory lines, with a flexible area, should be installed when replacing the primary or secondary brake line from the master to the hydraulic control unit or the lines leading from the hydraulic unit to the proportioning valve. First, use a tubing cutter or its equivalent, Special Tool C-3478-A, to remove the broken part and then ream out any roughness left at the cut end using the same tool. Place the tube nut on the tubing before starting to flare. For a double inverted tubing flare, use the Flaring Tool, Special Tool C-4047 or a similar tool, center the tubing in the jaws and proceed with pressure. Be sure the mold is deep enough where the ear supports the earring and then tackle the flare. If your ISO tubing flare requires metric measurements, use Snap-On Flaring Tool TFM-428 and check and clean the square edge of the tubing at the joint before aligning the flare in the fixture. Place the appropriate rotary valve rotor adaptor on the feed screw, add lubricant to the contact area and gently tighten the feed screw until the adaptor is seated straightly for the (metric) ISO tubing flare.

How to Properly Install Brake Lines and Flex Hoses on Dodge Grand Caravan?

Always use anti-rust fasteners to secure the routing clips or brake hoses to the aluminum front suspension cradle of the vehicle. Only choose Mopar anti-corrosion fasteners if you require a replacement. A hydraulic brake tube must be double wall 4.75 mm (3/16 inch) steel tubing, with an Al-rich/ZW-AC alloy coating and the identical type of tube nuts used. If traction control is fitted on a vehicle, tubing from the master cylinder to the hydraulic control unit must be changed along with the original anti-corrosion coatings and the correct newly-coated fuel lines are used as well. You need to follow correct procedures and use the proper tools when replacing brake tubing, to prevent the tubes from being kinked. All of the tubes ought to be fastened down by the special retaining clips recommended by the manufacturer. If the brake lines between the master cylinder and the ABS HCU or from the HCU to the proportioning valve on a 5-way cradle system need replacement, only the original factory brake line with a flex section is suitable because of movement while driving.

OEM Dodge Grand Caravan Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

58 Brake Lines found

View related parts
Dodge Grand Caravan Hose Part Number: 4581592AD
$52.31 MSRP: $78.85
You Save: $26.54 (34%)
ADD TO CART
Product Specifications
- Other Name: Hose - Brake Booster Vacuum; Brake Vacuum Hose; Brake Booster Vacuum Hose; Hose Brake Booster Vacuum
- Replaces: 4581592AA, 4581592AC, 4581592AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Dodge Grand Caravan | GT, SE, SE Plus, SXT | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- 2012-2013 Dodge Grand Caravan | 3.6L V6
View related parts
Dodge Grand Caravan Flex Hose Part Number: 4313630
$35.24 MSRP: $44.68
You Save: $9.44 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Front Wheel Brake; Brake Hydraulic Hose; Brake Dust Shield; Hydraulic Hose; Brake Hose; Brake Line; Splash Shield; Caliper Adapter; Front Wheel Brake Hose & Bracket, Right (up to 10-24-83)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1991 Dodge Grand Caravan | LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Dodge Grand Caravan Tube Assembly Part Number: 4683675
$120.97 MSRP: $153.35
You Save: $32.38 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Master Cylinder To HCU; Tube Master Cylinder To HCU; Tube Brake Master Cylinder; Tube Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Grand Caravan | Base, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Tube Assembly Part Number: 4683690
$73.01 MSRP: $92.55
You Save: $19.54 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Master Cylinder To HCU; Tube Brake Master Cylinder; Tube Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Grand Caravan | Base, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Rear Driver Side Part Number: 4721185AD
$98.48 MSRP: $565.00
You Save: $466.52 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Replaces: 4721185AB, 4721185AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Rear Passenger Side Part Number: 4721322AD
$91.05 MSRP: $150.00
You Save: $58.95 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear Right; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Passenger Side
- Replaces: 4721322AB, 4721322AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Front Passenger Side Part Number: 4683996AN
$34.09 MSRP: $50.80
You Save: $16.71 (33%)
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose Brake Front; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 4683996AH, 4683996AI, 4683996AF, 4683996AG, 4683996AJ, 4683996AE, 4683996AL, 4683996AM, 4683996AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2020 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Rear Driver Side Part Number: 4721323AD
$98.66 MSRP: $147.00
You Save: $48.34 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Replaces: 4721323AB, 4721323AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Front Driver Side Part Number: 4683791AE
$115.69 MSRP: $171.00
You Save: $55.31 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Replaces: 4683791AD, 4683791AC, 4683791AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Rear Driver Side Part Number: 4721325AJ
$121.28 MSRP: $181.00
You Save: $59.72 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Replaces: 4721325AF, 4721325AC, 4721325AD, 4721325AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Grand Caravan | Base, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Flex Hose Part Number: 68085101AE
$27.35 MSRP: $40.35
You Save: $13.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hose
- Replaces: 68085101AB, 68085101AD, 68085101AA, 68085101AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Flex Hose Part Number: 68084100AE
$33.98 MSRP: $50.60
You Save: $16.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hose
- Replaces: 68084100AC, 68084100AB, 68084100AD, 68084100AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Front Driver Side Part Number: 4683997AN
$37.97 MSRP: $56.55
You Save: $18.58 (33%)
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose Brake Front; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 4683997AK, 4683997AG, 4683997AL, 4683997AI, 4683997AJ, 4683997AE, 4683997AM, 4683997AF, 4683997AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2020 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Rear Driver Side Part Number: 4721541AH
$39.77 MSRP: $59.20
You Save: $19.43 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose Brake Rear; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 4721541AE, 4721541AD, 4721541AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Dodge Grand Caravan | C/V, Crew, Express, Mainstreet, R/T, SE, SXT | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Front Passenger Side Part Number: 4683790AE
$49.48 MSRP: $72.50
You Save: $23.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front Right; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaces: 4683790AB, 4683790AD, 4683790AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Flex Hose Part Number: 4779774AF
$54.67 MSRP: $82.70
You Save: $28.03 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose Brake Right Rear
- Replaces: 4779774AB, 4779774AD, 4779774AA, 4779774AC, 4779774AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2020 Dodge Grand Caravan | American Value Package, Crew, GT, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Flex Hose, Rear Driver Side Part Number: 4779773AF
$54.67 MSRP: $82.70
You Save: $28.03 (34%)
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose Brake Left Rear; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 4779773AC, 4779773AE, 4779773AD, 4779773AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2020 Dodge Grand Caravan | American Value Package, Crew, GT, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Flex Hose Part Number: 68091006AE
$22.62 MSRP: $32.50
You Save: $9.88 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Replaces: 68091006AD, 68091006AC, 68091006AB, 68091006AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012 Dodge Grand Caravan | Crew, R/T, SE, SXT | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Grand Caravan Tube Assembly, Steel Part Number: 1843251
Product Specifications
- Other Name: Tube - Steel; Brake Hose; Brake Line; Brake Tube; 25 Ft. Roll, 3/16" O.D. for various brake and fuel applications.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996 Dodge Grand Caravan | Base, ES, LE, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Brake Line Part Number: 4683674
Product Specifications
- Other Name: Line - Master Cylinder To HCU; Tube Assembly; Tube Master Cylinder To HCU; Tube Brake Master Cylinder; Tube Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Grand Caravan | Base, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

| Page 1 of 3 |Next >

1-20 of 58 Results

Dodge Grand Caravan Brake Line

Choose OEM Brake Line that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Line follows strict manufacturing steps to lock in quality and fit. If your Dodge Grand Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Line in Dodge Grand Caravan vehicles is useful for transmitting brake fluid from master cylinder to the brake caliper pistons allowing the hydraulic braking system to work effectively. This system is important to make sure that the car can afford to stop or reduce its speed when brake pedal is pressed. For the years, Brake Line of Dodge Grand Caravan models of has comprised of metal brake line and rubber brake hoses. Metal lines are easily susceptible to corrosion, particularly in wintering while rubber hoses may crack and abrade due to age and wrong installation. To offer a better feel, response, and reduced sagging, the replacement of stock rubber Brake Lines can be changed with high-quality braided stainless steel versions which are well suited for performance driving. If replacement is required, then there are pre-bent brake line kits which are fashioned from corrosion-free stainless steel. These kits are particular for Dodge Grand Caravan, in order to procided right diameter and fittings for whole repair.

Dodge Grand Caravan Brake Line Parts and Q&A

Tube Assembly
4683690
Q: What Are the Key Factors to Consider When Repairing Brake Lines on Dodge Grand Caravan?
A:
Whenever repairing brake lines or flex hoses, ensure you are using anti-corrosion fasteners to hold the clips or hoses to the front suspension cradle, as the cradle is made with aluminum. You should use only Mopar fasteners with the proper anti-corrosion coating if the original ones must be replaced. Only 4.75 mm (3/16 inch) double wall steel tubes with an Al-rich/ZW-AC alloy coatings and matching tube nuts are suitable for hydraulic brake tube replacement. In vehicles having traction control, both the primary and secondary hydraulic tubes between the master cylinder and the hydraulic control unit should be 6 mm (15/64 inch) and should be covered with Al-rich/ZW-AC alloy. All tubes should be protected from kinking by proper bending and flaring and they should not be put against sharp sides, moving parts or in hot areas, while insuring all retention clip types are used. Only original factory lines, with a flexible area, should be installed when replacing the primary or secondary brake line from the master to the hydraulic control unit or the lines leading from the hydraulic unit to the proportioning valve. First, use a tubing cutter or its equivalent, Special Tool C-3478-A, to remove the broken part and then ream out any roughness left at the cut end using the same tool. Place the tube nut on the tubing before starting to flare. For a double inverted tubing flare, use the Flaring Tool, Special Tool C-4047 or a similar tool, center the tubing in the jaws and proceed with pressure. Be sure the mold is deep enough where the ear supports the earring and then tackle the flare. If your ISO tubing flare requires metric measurements, use Snap-On Flaring Tool TFM-428 and check and clean the square edge of the tubing at the joint before aligning the flare in the fixture. Place the appropriate rotary valve rotor adaptor on the feed screw, add lubricant to the contact area and gently tighten the feed screw until the adaptor is seated straightly for the (metric) ISO tubing flare.
Tube Assembly
4683675
Q: How to Properly Install Brake Lines and Flex Hoses on Dodge Grand Caravan?
A:
Always use anti-rust fasteners to secure the routing clips or brake hoses to the aluminum front suspension cradle of the vehicle. Only choose Mopar anti-corrosion fasteners if you require a replacement. A hydraulic brake tube must be double wall 4.75 mm (3/16 inch) steel tubing, with an Al-rich/ZW-AC alloy coating and the identical type of tube nuts used. If traction control is fitted on a vehicle, tubing from the master cylinder to the hydraulic control unit must be changed along with the original anti-corrosion coatings and the correct newly-coated fuel lines are used as well. You need to follow correct procedures and use the proper tools when replacing brake tubing, to prevent the tubes from being kinked. All of the tubes ought to be fastened down by the special retaining clips recommended by the manufacturer. If the brake lines between the master cylinder and the ABS HCU or from the HCU to the proportioning valve on a 5-way cradle system need replacement, only the original factory brake line with a flex section is suitable because of movement while driving.