To start, open the hood and disconnect the negative
Battery Cable's remote end from the remote battery terminal. After that, take out the tilt lever and both the upper and lower steering column shrouds. Once you're done with the above, disconnect the multi-function switch by removing its screws and connections. To install, link the multi-function switch connections, attach them to the panel surface using the screws and tighten the screws to 17 in. lbs. (2 Nm). Following this, place both upper and lower steering column shrouds back and add the tilt lever in its place. After that, link the negative battery cable remote terminal again to the remote battery post.