JeepParts
My Garage
My Account
Cart
OEM Dodge Journey Fuel Pump
Gas Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Fuel Pumps found
Dodge Journey Module - Fuel Pump/Level Unit Part Number: 68039210AG
$377.85 MSRP: $553.00You Save: $175.15 (32%)Ships in 1-2 Business Days
Dodge Journey Fuel Pump Part Number: 68038901AE
$438.69 MSRP: $665.00You Save: $226.31 (35%)Ships in 1-2 Business DaysDodge Journey Module - Fuel Pump/Level Unit Part Number: 5145614AC
$625.43 MSRP: $949.00You Save: $323.57 (35%)Ships in 1-2 Business Days
Dodge Journey Fuel Pump, Passenger Side Part Number: 68038902AB
$260.59 MSRP: $384.00You Save: $123.41 (33%)Ships in 1-2 Business Days
Dodge Journey Fuel Pump
Choose OEM Fuel Pump that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Pump follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
The Fuel Pump is one of the essential parts that concern the reliability of the Dodge Journey models series. This Fuel Pump timely delivers fuel to the engine from the tank in order to facilitate proper ignition and improve efficiency of the engine. Highly resistant, the Fuel Pump has been built for compatibility with most of the built Journey cars from the year 2009, the year the car model was debuted, up to 2020 when the production of the model was stopped. Actually, the electric Fuel Pump technology used by Dodge Journey is characterized by higher pressure which increases efficiency and safety of a vehicle. Today, with the help of Electronic Control Units, the Fuel Pump promises the most accurate fuel delivery hence less emissions and longer engine life. The Dodge Journey is valued not only for its utility and large three-zone hall, but also for its excellent safety equipment, which is joined by the consistency of the Fuel Pump. Pulse-width modulation is among the key features of the Fuel Pump, which act as special features to cut power consumption to higher levels and subsequently increase the Fuel Pump's durability. In general, the Fuel Pump could be seen as one of the most significant innovative prerequisites for the further attraction of car buyers to the models mentioned, thus enriching the Dodge Journey lineup with efficient and safe performance features.
Dodge Journey Fuel Pump Parts and Q&A
- Q: What is the Proper Way to Service the Rubber O-Ring Seal During Fuel Pump Replacement on Dodge Journey?A:Each time you maintain the fuel pump module, replace the rubber O-ring seal. First, wipe the old O-ring seal off the fuel tank and then put a new one in its place. With AWD cars, place the internal fuel line directly into the main fuel pump module. Place the main fuel pump inside the fuel tank without allowing the float arm to bend or bend the body. It is necessary to place the main fuel pump module in the right part of the fuel tank for the fuel level gauge to perform properly. Install the rubber seal in the tank and then line up the main fuel pump with the marks you noticed when taking it apart. Secure the lock-ring over the main fuel pump module, then get your lock-ring remover/installer 9340 and put it at the notches on the lock-ring's outside. Apply the 1/2 inch drive breaker bar to the lock-ring remover/installer 9340 and rotate clockwise until all seven teeth of the lock-ring press against each other. Since the fuel pump module can cause injury by coming into contact with fuel, you should always wear protective clothing and eye protection when handling it. Clean the rubber seal on the fuel tank opening and place a new rubber O-ring seal there. Bring the auxiliary fuel pump module to your vehicle and connect its internal fuel line to it. Then, place the vehicle into the fuel tank with care not to bend the fuel float. The gauge will not work properly if the auxiliary pump is not fitted in the right position. Line up the O-ring seal with its groove and move the auxiliary fuel pump module into the marked orientation as it was before you took it off. Make sure the lock-ring is over the fuel pump module, then put the remover/installer into the notches along the ring's edge. Stand the lock-ring remover/installer 9318 in place and use the 1/2 inch drive breaker bar to turn both clockwise until the lock-ring's notches are all engaged.
Related Dodge Journey Parts
Dodge Journey Gas Cap
Dodge Journey Intake Manifold
Dodge Journey Fuel Tank
Dodge Journey Intake Manifold Gasket
Dodge Journey Fuel Filler Neck
Dodge Journey Fuel Injector O-Ring
Dodge Journey Fuel Level Sensor
Dodge Journey Fuel Pump Gasket
Dodge Journey Fuel Pump Seal
Dodge Journey Fuel Sending Unit
Dodge Journey Fuel Tank Lock Ring
Dodge Journey Fuel Tank Strap