How to Service the Intake Manifold Temperature Sensor on Dodge Journey?

You need to remove and isolate the battery's negative cable before you service the Intake Manifold Temperature Sensor. Carefully wash any dirt from the sensor area before you take it out of the air box. After that, unplug the electrical plug for the intake manifold temperature sensor. Turn the intake manifold temperature sensor counter-clockwise 1/4 turn, then remove it from the air box.

How to Install the Intake Manifold Temperature Sensor on Dodge Journey?

Secure the intake manifold temperature sensor in the air box by turning it 1/4 turn clockwise. After that, match up the intake manifold temperature sensor connector to the associated part. Rejoin the negative battery cable and tighten the attaching nut to 5 Nm or 45 in. lbs.

OEM Dodge Journey Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Intake Manifold Temperature Sensors found

View related parts
Dodge Journey Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crew, Crossroad, Express, R/T, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Mass Air Flow Sensor Part Number: 5149264AB
$25.31 MSRP: $37.20
You Save: $11.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Ambient Air Temperature Sensor; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Temperature Sensor; Ambient, Air, and Intake Temperature Sensor.
- Replaces: 5149264AA, 5293138AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Mass Air Flow Sensor Part Number: 5149182AB
$31.67 MSRP: $46.95
You Save: $15.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Temperature Sensor; Temperature Sensor; Air Intake Temperature Sensor; Sensor Air Temperature
- Replaces: 5149182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Journey | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 6 Cyl 3.6 L FLEX

Dodge Journey Intake Manifold Temperature Sensor

Choose OEM Intake Manifold Temperature Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Intake Manifold Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Journey Intake Manifold Temperature Sensor is thus an important part that proves very valuable to the enhancement of the Dodge Journey line. This sensor assists in determining the temperature of the air to be supplied to the engine thus helping in the combustion of the fuel and therefore efficiency. As an output sensor for the PTM, the Dodge Journey Intake Manifold Temperature Sensor feeds the exact information that will enable the fuel injectors work as expected in determining the appropriate proportion of air to fuel. It also enhances safety by mitigating problems like the septic and hesitation of the engine especially when one is accelerating. From the compatibility stand point, this sensor fits ranges of Dodge Journey models well and it is durability for the daily car using, making it prime one for Journey users. This has greatly enhanced its reliability since; any chance of failure is greatly reduced by the strong build and accuracy prevailing in its engineering. Furthermore, technology applied on the Dodge Journey Intake Manifold Temperature Sensor makes this product to have the ability of quick reactions so that the performance of the engine can be enhanced with different conditions. This sensor is especially important in the automotive market because of the vital function of improving both productivity and security, which allow calling it the essential parameter in the characterization of the Dodge Journey. In totality, the Dodge Journey Intake Manifold Temperature Sensor is a perfect example of one of Dodge's products giving meaning to innovation and quality maintaining its reputation as the crucial factor to the Journey.

Dodge Journey Intake Manifold Temperature Sensor Parts and Q&A

Mass Air Flow Sensor
5149264AB
Q: How to Service the Intake Manifold Temperature Sensor on Dodge Journey?
A:
You need to remove and isolate the battery's negative cable before you service the Intake Manifold Temperature Sensor. Carefully wash any dirt from the sensor area before you take it out of the air box. After that, unplug the electrical plug for the intake manifold temperature sensor. Turn the intake manifold temperature sensor counter-clockwise 1/4 turn, then remove it from the air box.
Temperature Sensor
56028364AA
Q: How to Install the Intake Manifold Temperature Sensor on Dodge Journey?
A:
Secure the intake manifold temperature sensor in the air box by turning it 1/4 turn clockwise. After that, match up the intake manifold temperature sensor connector to the associated part. Rejoin the negative Battery Cable and tighten the attaching nut to 5 Nm or 45 in. lbs.