How to Install the Neutral Safety Switch on Dodge Journey?

To start the installation of the Transmission Range Sensor, put in a new manual seal with a socket (3). After that, push the manual lever into the case all the way down to the TRS. Insert the TRS/rooster comb into the slot on the manual lever and then put the lever fully into the case. Place a pin punch (2) through the TRS/rooster comb (1) and push the roll pin (3) through to complete the assembly. Later, screw (1) into the manual lever (2) and make sure it reaches a tightness of 1 Nm (10 in. lbs.). Add the park rod assembly (2) to the TRS/rooster comb (1) and slip the park rod assembly into place on the guide assembly. Place the park pawl pin in the park pawl tube, attache the electrical connector and then put in the valve body.

OEM Dodge Journey Neutral Safety Switch

Transmission Range Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Neutral Safety Switchs found

View related parts
Dodge Journey Neutral Safety Switch Part Number: 4659676AC
$62.61 MSRP: $93.90
You Save: $31.29 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Range Sensor; Parking Brake Warning Switch; Sensor Transmission Range
- Replaced by: 4659676AD
- Replaces: 4659676AB, 4659676
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2020 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Stoplamp Switch Part Number: 68055955AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Automatic Transmission Position Switch; Brake Light Switch; Range Sensor; Includes Neutral Safety Switch; Parking Brake Warning Switch.
- Replaces: 5078967AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2019 Dodge Journey | AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

Dodge Journey Neutral Safety Switch

Choose OEM Neutral Safety Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Neutral Safety Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Journey Neutral Safety Switch is a safety switch that ensures the vehicle is only capable of being started when the transmission lever is in neutral or park. The Neutral Safety Switch on the Dodge crossover tracks the shifter location and blocks the signal to the starter if the shifter is in any drive range. A simple piece of electrical equipment prevents a stationary Journey from lurching forward upon turning the ignition key. The Neutral Safety Switch closes its contacts when the selector is in the neutral or park position. The switch ensures that current reaches the starter motor, allowing the engine to crank. If any position other than those gears is selected, then the Neutral Safety Switch will not close, disabling power and the start circuit. The item requires proper alignment with the Journey shifter mechanism to function correctly due to the direct linkage of its operation. The switch that detects and interrupts the starter in every Dodge model is controlled by the same integrated assembly. The Journey does not offer any alternative styles or optional variations and does not describe any performance-oriented features. A driver who is aware of the function of the Dodge Neutral Safety Switch will not allow their car to start.

Dodge Journey Neutral Safety Switch Parts and Q&A

Neutral Safety Switch
4659676AC
Q: How to Install the Neutral Safety Switch on Dodge Journey?
A:
To start the installation of the Transmission Range Sensor, put in a new manual seal with a socket (3). After that, push the manual lever into the case all the way down to the TRS. Insert the TRS/rooster comb into the slot on the manual lever and then put the lever fully into the case. Place a pin punch (2) through the TRS/rooster comb (1) and push the roll pin (3) through to complete the assembly. Later, screw (1) into the manual lever (2) and make sure it reaches a tightness of 1 Nm (10 in. lbs.). Add the park rod assembly (2) to the TRS/rooster comb (1) and slip the park rod assembly into place on the guide assembly. Place the park pawl pin in the park pawl tube, attache the electrical connector and then put in the valve body.