OEM Dodge Magnum Ignition Lock Cylinder

Dodge Magnum Ignition Lock Cylinder Parts and Q&A

• Ignition Lock Cylinder
  5139207AA
  Q: How to Install an Ignition Lock Cylinder on Dodge Magnum?

  A:

  Put the key into the ignition lock cylinder and turn it so the ignition lock cylinder can be latched down. Remember to set the socket at the back of the housing to "ON" to line up with the end of the ignition lock cylinder. Lay the ignition lock cylinder into the grooves in the lock housing and then push it until the tab appears through the indicator hole. Then, turn the key to Off and unplug it from the vehicle. Install the center console bezel onto the instrument panel and after that, the bezel ignition lock cylinder ring. At the end, link the negative Battery Cable to the car.
• Ignition Lock Cylinder
  5083915AB
  Q: How to Service and Repair an Ignition Lock Cylinder on Dodge Magnum?

  A:

  Once you have the Ignition Switch, you should always disconnect the negative Battery Cable first. Take out the bezel ignition switch ring and unfasten the center console bezel from its place on the instrument panel. Pull the ignition lock cylinder from the housing by pressing the locking tab on the switch housing and turning the key to the "ON" position. When installing, place the key into the ignition lock cylinder and turn it so it's in the turned position, letting the retaining tab on the ignition lock cylinder press down. The shaft in the ignition lock cylinder must line up with the socket in the housing and the housing switch needs to be in the "ON" position as well. Tuck the ignition lock cylinder into the space the housing creates and slide it in until the tab sticks out through the opening. Switch the power on the control knob to the Off position and remove the key. Before re-attaching the negative battery terminal, first put back the instrument panel bezel, then attach the bezel ignition ring and lastly, install the center console.