How to Install a Seat Heater Replacement Element on Dodge Magnum?

Before putting the new heating element in place, remove the adhesive backing on the back of the element. Then, gently stick it over top of the old one, making sure you don't fold or crease the part. After that, connect the two electrical connectors on the heating element (3&4) and then attach the battery's negative cable again. Then, make sure the system for the heated seats is working as it should. In the end, place the seat cushion and seat back cover on the seat, making sure the seat wire harness passes through the seat and back, with all extra wire hidden between the cushion foam and the rear carpet flap of the trim cover.

How to Maintain a Seat Heater on Dodge Magnum?

You should start the seat heating service by detaching and blocking the negative battery cable. Uncover the seat cushion or the trim at the back of the seat. Disconnect next the cables from the rear seat that is not working. Take apart the inoperative heating element and cut the connector wires off evenly, right next to the original element. The factory heaters in the seats or the back cushions cannot be removed, so taking them out will definitely damage the furniture. It is designed to go right on top of the heating element that is no longer working.

OEM Dodge Magnum Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
Dodge Magnum Seat Cushion Heater, Front Part Number: 5000021AA
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Heater Pad, Front, Front Lower, Lower; Element; Pad Heater Seatback, Pn 05000022Ab; Heated Pad Seat Cushion.
- Position: Front
- Replaces: 5000021AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Seat Back Pad, Front Part Number: 5000022AB
Product Specifications
- Other Name: Pad - Seat Back; Seat Heater Pad, Front, Front Upper; Seat Back Heater; Heated Pad for back cushion.
- Position: Front
- Replaces: 5000022AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Magnum Seat Heater

Choose OEM Seat Heater that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Seat Heater follows strict manufacturing steps to lock in quality and fit. If your Dodge Magnum matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Magnum parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Magnum Seat Heater is an impressive feature that is standard on most of the Dodge Magnum models which are well-known due to their durability and power. This outstanding Seat Heater entails heat pads, which are put inside the seat covering with the intention of warming the passengers especially in the cold hours of the day. For the Magnum, this is an advantage regardless whether the model is the old two-door coup e, this new the rear-wheel-drive station wagon type that came a couple of years ago. Thus, maintaining the warm state of the occupants, the Dodge Seat Heater also enhances driver concentration and comfort, minoring on distractions resulting from cold seats. This Seat Heater's ability to conveniently fit whichever Seat model a driver owns is a definite perk for many vehicle owners. Interestingly, the Dodge Magnum Seat Heater is unique from the other heaters available in the automotive market since it fits perfectly on the car thus preserving a neat look while at the same time putting into use. The Dodge Magnum Seat Heater has proven its reliability and efficiency; it is not an extra but an essential part of the car that conveys the company's values, using the premier quality to create the premier experience, and puts the focus on the client. In general, the Dodge Magnum Seat Heater is a perfect example of great work accomplished for the car industry, as it makes the car more comfortable, which is crucial for those people, who bought the Magnum.

Dodge Magnum Seat Heater Parts and Q&A

Seat Back Pad, Front
5000022AB
Q: How to Install a Seat Heater Replacement Element on Dodge Magnum?
A:
Before putting the new heating element in place, remove the adhesive backing on the back of the element. Then, gently stick it over top of the old one, making sure you don't fold or crease the part. After that, connect the two electrical connectors on the heating element (3&4) and then attach the battery's negative cable again. Then, make sure the system for the heated seats is working as it should. In the end, place the Seat Cushion and seat back cover on the seat, making sure the seat wire harness passes through the seat and back, with all extra wire hidden between the cushion foam and the rear carpet flap of the trim cover.
Seat Cushion Heater, Front
5000021AA
Q: How to Maintain a Seat Heater on Dodge Magnum?
A:
You should start the seat heating service by detaching and blocking the negative Battery Cable. Uncover the Seat Cushion or the trim at the back of the seat. Disconnect next the cables from the rear seat that is not working. Take apart the inoperative heating element and cut the connector wires off evenly, right next to the original element. The factory heaters in the seats or the back cushions cannot be removed, so taking them out will definitely damage the furniture. It is designed to go right on top of the heating element that is no longer working.