How to install an axle shaft on Dodge Nitro?

First, put the axle shaft into the axle tube and ensure the side gear splines fit properly together. Put a small amount of gear lubricant onto the bearing bore and the sealing lip. After that, add the C-lock (1) to the very end of the axle shaft and push the shaft out to seat the C-lock in the side gear. Then, put the smaller mating shaft (1) inside the differential case (2) between the thrust washers and the differential pinions. Position the shaft hole next to the hole in the differential case and use Mopar Lock & Seal or something similar to tighten the lock screw (4) to 26 Nm (19 ft. lbs.). After that, attach the differential cover and the rear brake parts.

How to Service and Repair an Axle Shaft on Dodge Nitro?

When servicing the axle shaft, first move the vehicle into neutral and lift it with a hoist. To start, eliminate the brake assembly from the rear wheel and also remove the wheel speed sensor. After that, uncover the differential housing and drain out the used lubricant. Rotate the differential case until the pinion mate shaft lock screw appears, then take out the lock screw. After that, get rid of the pinion mate shaft from the differential case. Press in the axle shaft to take out the C-lock from the other end and at last, pull the axle from the side gear and axle tube.

OEM Dodge Nitro Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Axle Shafts found

View related parts
Dodge Nitro Axle Shaft Assembly, Front Driver Side Part Number: 5189279AA
$335.87 MSRP: $511.00
You Save: $175.13 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Constant Velocity Axle; Axle Shaft; Axle Assembly; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: RL189279AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Axle Shafts Part Number: 68019326AA
Product Specifications
- Other Name: Shaft - Axle; Axle Shaft; Intermed Shaft; Shaft Axle
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Axle Shaft, Rear Part Number: 52114548AD
$197.14 MSRP: $296.00
You Save: $98.86 (34%)
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear; Axle Shafts
- Position: Rear
- Replaces: 52114548AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Axle Shaft Assembly, Front Passenger Side Part Number: 5189278AA
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Constant Velocity Axle; Axle Shaft; Axle Assembly; Shaft Axle Half; CV Axle Assembly
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Axle Shaft

Choose OEM Axle Shaft that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Axle Shaft follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Axle Shaft in Dodge Nitro vehicles is used to further transmit power to the drive wheels allowing them to spin independently in order to enhance grip around bends. That's why, if, for instance, Dodge Nitro has dependent front suspension and independent rear suspension, it uses both solid axles and halfshafts. While solid axles are used in only rear-wheel drive configuration, old cars, halfshaft are used in independent suspension system, to join the differential with wheels. The structure of Axle Shaft helps to bear the weight and transfer the torque, there are some types of axle shafts namely Live axle for bearing the weight and Non-Driving axle for suspension purpose only. These axle shafts are made from materials such as chrome-molybodenum or carbon steel to enhance the reliability by withstanding different mannerisms when driving the Dodge Nitro. Maintenance is required to be carried out from time to time since worn out components cause noise and vibrations alongside threatening the functioning of Axle Shaft system.

Dodge Nitro Axle Shaft Parts and Q&A

Axle Shaft Assembly, Front Passenger Side
5189278AA
Q: How to install an axle shaft on Dodge Nitro?
A:
First, put the axle shaft into the axle tube and ensure the side gear splines fit properly together. Put a small amount of gear lubricant onto the bearing bore and the sealing lip. After that, add the C-lock (1) to the very end of the axle shaft and push the shaft out to seat the C-lock in the side gear. Then, put the smaller mating shaft (1) inside the differential case (2) between the thrust washers and the differential pinions. Position the shaft hole next to the hole in the differential case and use Mopar Lock & Seal or something similar to tighten the lock screw (4) to 26 Nm (19 ft. lbs.). After that, attach the Differential Cover and the rear brake parts.
Axle Shaft Assembly, Front Driver Side
5189279AA
Q: How to Service and Repair an Axle Shaft on Dodge Nitro?
A:
When servicing the axle shaft, first move the vehicle into neutral and lift it with a hoist. To start, eliminate the brake assembly from the rear wheel and also remove the wheel speed sensor. After that, uncover the differential housing and drain out the used lubricant. Rotate the differential case until the pinion mate shaft lock screw appears, then take out the lock screw. After that, get rid of the pinion mate shaft from the differential case. Press in the axle shaft to take out the C-lock from the other end and at last, pull the axle from the side gear and axle tube.