How to Remove Car Speakers from Various Locations on Dodge Nitro?

Before removing the front door speaker, disconnect the battery negative cable, then remove the door's inner lining and afterwards take out the speaker and separate the wire harness connections. Turn off and isolate the battery negative terminal, remove the air outlet, loosen the speaker mounting fasteners and then lift the speaker from the car while taking apart its wire connector. The first step is to connect the battery negative terminal, go on to the rear door panel and then separate the speaker fasteners, after which you remove the speaker and its connector wire from the door. Disconnect the battery negative from the subwoofer while holding the hot side. Then, separate the speaker grille by removing its fasteners first. Untie the speaker from the subwoofer's base, unplug its electrical connection and take it out.

How to Install Car Speakers on Dodge Nitro?

Start the installation by connecting the harness wire to the front door and tightening the bolts to 2 Nm (20 in. lbs.), finishing by mounting the speaker on the door. Following that, mount the front door trim piece and connect the negative battery cable again. For the instrument panel, join the wire harness connector, fit the speaker, hold it with mounting screws and tighten these to a torque of 2 Nm or 20 in. lbs. Next, install the air outlet and reconnect the battery negative cable. At the rear, attach the wire harness to its connector, set the speaker by attaching it with 2 Nm (20 in. lbs.) screws, place the rear door trim panel and reattach the negative battery cable. Once the other speakers are done, put the electrical connector on the subwoofer and secure the sub with fasteners, place the grille and link the sub's negative wire to the battery.

OEM Dodge Nitro Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Car Speakers found

View related parts
Dodge Nitro Instrument Panel Speaker, Front Part Number: 5064205AA
$10.77 MSRP: $20.60
You Save: $9.83 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker H; Speaker, Front; Speaker Instrument Panel; Speaker 2.5"
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Door Speaker Part Number: 5091020AC
$37.53 MSRP: $56.15
You Save: $18.62 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker; Rear Speaker; Instrument Panel Speaker; Quarter Panel Speaker; Front Driver Speaker; Rear Driver Speaker
- Replaces: 5091020AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2011 Dodge Nitro | 3.7L V6, 4.0L V6
- 2007 Dodge Nitro | R/T, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Front Driver Speaker Part Number: 5091040AA
$48.84 MSRP: $72.40
You Save: $23.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker; Speaker, Center, Front, Rear; Rear Driver Speaker; Speaker 6.5"
- Position: Front
- Replaces: 4672455AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Nitro | R/T, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Front Driver Speaker, Rear Part Number: 5064203AD
$53.11 MSRP: $79.15
You Save: $26.04 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker H; Speaker, Center, Rear; Rear Driver Speaker; Speaker 6.5"
- Position: Rear
- Replaces: 5064203AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Tweeter, Front Part Number: 56043194AA
Product Specifications
- Other Name: Speaker H - Tweeter; Speaker, Front; Speaker Tweeter
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Instrument Panel Speaker, Front Part Number: 5064204AB
Product Specifications
- Other Name: Speaker H; Speaker, Front; Speaker Instrument Panel; Speaker 2.5"
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Front Driver Speaker, Center Part Number: 4714600AB
Product Specifications
- Other Name: Speaker; Speaker, Center, Front, Rear; Rear Driver Speaker; Speaker 6.5"; Speaker Door
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Instrument Panel Speaker, Center Part Number: 5081667AC
Product Specifications
- Other Name: Speaker; Speaker, Center, Rear; Front Driver Speaker; Speaker 6.5"
- Position: Center
- Replaces: 5081667AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Nitro | R/T, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Car Speakers

Choose OEM Car Speakers that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Car Speakers follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Nitro Car Speakers Parts and Q&A

Front Driver Speaker, Rear
5064203AD
Q: How to Remove Car Speakers from Various Locations on Dodge Nitro?
A:
Before removing the front door speaker, disconnect the battery negative cable, then remove the door's inner lining and afterwards take out the speaker and separate the wire harness connections. Turn off and isolate the battery negative terminal, remove the air outlet, loosen the speaker mounting fasteners and then lift the speaker from the car while taking apart its wire connector. The first step is to connect the battery negative terminal, go on to the rear door panel and then separate the speaker fasteners, after which you remove the speaker and its connector wire from the door. Disconnect the battery negative from the subwoofer while holding the hot side. Then, separate the speaker grille by removing its fasteners first. Untie the speaker from the subwoofer's base, unplug its electrical connection and take it out.
Instrument Panel Speaker, Front
5064205AA
Q: How to Install Car Speakers on Dodge Nitro?
A:
Start the installation by connecting the harness wire to the front door and tightening the bolts to 2 Nm (20 in. lbs.), finishing by mounting the speaker on the door. Following that, mount the front door trim piece and connect the negative Battery Cable again. For the instrument panel, join the wire harness connector, fit the speaker, hold it with mounting screws and tighten these to a torque of 2 Nm or 20 in. lbs. Next, install the air outlet and reconnect the battery negative cable. At the rear, attach the wire harness to its connector, set the speaker by attaching it with 2 Nm (20 in. lbs.) screws, place the rear door trim panel and reattach the negative battery cable. Once the other speakers are done, put the electrical connector on the subwoofer and secure the sub with fasteners, place the grille and link the sub's negative wire to the battery.