How to Remove a MAP Sensor on Dodge Nitro?

The MAP sensor, part number 7, is set at the front section of the intake manifold, part number 1. You should begin the process by pulling out the electrical connector identified as part number 2 from the sensor. Clean the surrounding area of the MAP sensor and then detach one sensor mounting screw, referenced by part number 8. Slip the MAP sensor off the locating pin which is marked as 6 on your diagram. In addition, check how well the sensor o-ring, listed as part number 2, is working.

How to Install a MAP Sensor in the Intake Manifold on Dodge Nitro?

The MAP sensor is fitted at the front of the intake manifold and fixed with an O-ring to seal it properly. Clean the hole where the MAP sensor is mounted on the intake manifold and carefully check if the O-ring is damaged. After that, arrange the sensor inside the manifold and secure it with the mounting bolts, tightening them to a value of 3 Nm (25 in. lbs.). Connect the electrical connector as the last step of the installation.

OEM Dodge Nitro MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
Dodge Nitro M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Heat, SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Nitro M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS

Dodge Nitro MAP Sensor

Choose OEM MAP Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each MAP Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The MAP Sensor in Dodge Nitro vehicles is an imperative thing since it is responsible for the positive air pressure, which is assuming the intake manifold and relaying the data to the ECU for fuel management. In the fuel injected engines, the MAP Sensor helps in calculation of air density and in the determination of the right mixture of air and fuel for combustion thus broadly contributing to the speed density method. A MAP sensor may definitely be used in conjunction with a naturally aspirated engine while a forced induction engine will use both the MAP or the MAF. The MAP Sensor also plays a role on-board diagnostics and can help in the check of the EGR valve with useful measurements that are also critical to fuel injection and engine tuning.

Dodge Nitro MAP Sensor Parts and Q&A

M.A.P. Sensor
68199324AB
Q: How to Remove a MAP Sensor on Dodge Nitro?
A:
The MAP sensor, part number 7, is set at the front section of the Intake Manifold, part number 1. You should begin the process by pulling out the electrical connector identified as part number 2 from the sensor. Clean the surrounding area of the MAP sensor and then detach one sensor mounting screw, referenced by part number 8. Slip the MAP sensor off the locating pin which is marked as 6 on your diagram. In addition, check how well the sensor o-ring, listed as part number 2, is working.
M.A.P. Sensor
56041018AD
Q: How to Install a MAP Sensor in the Intake Manifold on Dodge Nitro?
A:
The MAP sensor is fitted at the front of the Intake Manifold and fixed with an O-ring to seal it properly. Clean the hole where the MAP sensor is mounted on the intake manifold and carefully check if the O-ring is damaged. After that, arrange the sensor inside the manifold and secure it with the mounting bolts, tightening them to a value of 3 Nm (25 in. lbs.). Connect the electrical connector as the last step of the installation.