How to Safely Remove a Front Wheel Stud Without Using a Hammer on Dodge Nitro?

First, raise the car, support it and loosen the wheel assembly by removing it. After that, take out the brake caliper, the adapter and the rotor. Unbolt and then remove stud 2 from the hub using Remover C-4150-A.

How to Service and Repair a Rear Wheel Stud on Dodge Nitro?

Start by inserting the new rear wheel stud into the hub flange and rotating it between the hub/bearing and the park brake shoes. After that, add the three washers to the stud and tighten the lug nut by placing its edge against the washers. Drive the lug nut tight so the stud pulls into the hub flange and then confirm the stud is sitting in place. Once done, take out the lug nut and washers and put in the brake rotor and caliper. Afterward, fit the wheel and tire using a new lug nut on any studs you changed before and take off the support while lowering the car.

OEM Dodge Nitro Wheel Stud

Rim Wheel Stud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Studs found

View related parts
Dodge Nitro Wheel Stud, Rear Part Number: 6036668AA
$11.07 MSRP: $16.50
You Save: $5.43 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud - Wheel; Axle Hub Mounting Bolt, Rear; Wheel Lug Stud, Rear; Wheel Bolt; Axle Shaft Stud; Stud Wheel; Wheel Lug Stud
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Wheel Stud, Front Part Number: 68003282AA
$10.27 MSRP: $14.75
You Save: $4.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt - Hub; Wheel Lug Stud, Front; Wheel Stud, 1/2-20; Wheel Bolt; Stud; Stud Hub; Wheel Lug Stud
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Wheel Stud

Choose OEM Wheel Stud that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wheel Stud follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Nitro Wheel Stud Parts and Q&A

Wheel Stud, Front
68003282AA
Q:
How to Safely Remove a Front Wheel Stud Without Using a Hammer on Dodge Nitro?
A:
First, raise the car, support it and loosen the wheel assembly by removing it. After that, take out the Brake Caliper, the adapter and the rotor. Unbolt and then remove stud 2 from the hub using Remover C-4150-A.
Wheel Stud, Rear
6036668AA
Q:
How to Service and Repair a Rear Wheel Stud on Dodge Nitro?
A:
Start by inserting the new rear wheel stud into the hub flange and rotating it between the hub/bearing and the park brake shoes. After that, add the three washers to the stud and tighten the lug nut by placing its edge against the washers. Drive the lug nut tight so the stud pulls into the hub flange and then confirm the stud is sitting in place. Once done, take out the lug nut and washers and put in the Brake Rotor and caliper. Afterward, fit the wheel and tire using a new lug nut on any studs you changed before and take off the support while lowering the car.