How Does Wheelhouse Handle Front Fender Liner Service and Repair on Dodge Nitro?

You should first support and lift the vehicle before working on the front fender liner. After that, take off the wheel and tire to reach the front wheel house liner. Put a rivet extractor tool into the front fender flare molding, the liner above the wheel house and the one found at the bottom of the front fascia. Taken the wheel speed sensor harness off the wheel house liner and take out all the push pins as well. Take out the liner from the front wheel house area at the end.

How Does Wheelhouse Installation Affect the Front Fender Liner on Dodge Nitro?

Installation begins with fixing the front wheel house liner into the front wheel house opening. After that, join the wheel speed sensor harness to the inside of the wheel house liner. Screw three push pins into each hole on the wheel house liner and fender inner wheelhouse and into the wheel house line and front fascia. Mount the splash shield to the side sill molding using just one rivet and then install all of the remaining push pins. Set a rivet through the hole in the wheel house liner and lower front fascia and drive four into the front fender flare molding, wheel house liner and front fender. After that, replace the wheel and tire, taking care to tighten the wheel nuts to 136 Nm (100 ft. lbs.).

OEM Dodge Nitro Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheelhouses found

View related parts
Dodge Nitro Splash Shield, Front Driver Side Part Number: 55157171AD
$109.22 MSRP: $162.00
You Save: $52.78 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Left; Liner Front Fender; Fender Splash Shield
- Position: Front Driver Side
- Replaces: 55157171AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Splash Shield, Front Passenger Side Part Number: 55157170AD
$109.22 MSRP: $162.00
You Save: $52.78 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Front Fender; Fender Splash Shield, Front Right; Liner Front Fender; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: 55157170AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Wheelhouse Liner, Rear Passenger Side Part Number: 55157174AE
$87.96 MSRP: $129.00
You Save: $41.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Side; Quarter Panel Splash Shield, Rear Right; Liner Fender Side
- Position: Rear Passenger Side
- Replaces: 55157174AC, 55157174AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Wheelhouse Liner, Rear Driver Side Part Number: 55157175AE
$116.30 MSRP: $128.00
You Save: $11.70 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Side; Quarter Panel Splash Shield, Rear Left; Liner Fender Side
- Position: Rear Driver Side
- Replaces: 55157175AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Wheelhouse

Choose OEM Wheelhouse that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wheelhouse follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Nitro Wheelhouse functions as a crucial component because it boosts Dodge Nitro vehicle reliability while improving performance to handle common driving conditions. Built to defend wheel well regions from water and dirt and debris accumulation the Wheelhouse represents an important design which prevents rust development throughout fenders and engine compartments. Protection delivered by the Wheelhouse is vital because Dodge Nitro models are recognized for their durability and exceptional performance qualities. The Nitro Wheelhouse meets different vehicle models through its combination of metal or thermoplastic inner fender panels with splash shields that block tire splash and protect from mud. The protective components cooperate as one system to defend the Dodge Nitro from harmful conditions thus improving efficiency and safety metrics. The Dodge car Wheelhouse distinguishes itself in the automotive sector because of its strong form together with efficient operational ability which delivers extended product lifetime. The car benefits from its ECG 3.7L V6 engine plus advanced transmission system capabilities which keeps the vehicle optimally prepared for any driving condition. The car Wheelhouse functions as more than a protective feature because the automaker continues to deliver cutting-edge performance-based solutions which make it an essential model component.

Dodge Nitro Wheelhouse Parts and Q&A

Splash Shield, Front Driver Side
55157171AD
Q: How Does Wheelhouse Handle Front Fender Liner Service and Repair on Dodge Nitro?
A:
You should first support and lift the vehicle before working on the front fender liner. After that, take off the wheel and tire to reach the front wheel house liner. Put a rivet extractor tool into the front fender flare molding, the liner above the wheel house and the one found at the bottom of the front fascia. Taken the wheel speed sensor harness off the wheel house liner and take out all the push pins as well. Take out the liner from the front wheel house area at the end.
Splash Shield, Front Passenger Side
55157170AD
Q: How Does Wheelhouse Installation Affect the Front Fender Liner on Dodge Nitro?
A:
Installation begins with fixing the front wheel house liner into the front wheel house opening. After that, join the wheel speed sensor harness to the inside of the wheel house liner. Screw three push pins into each hole on the wheel house liner and fender inner wheelhouse and into the wheel house line and front fascia. Mount the splash shield to the side sill molding using just one rivet and then install all of the remaining push pins. Set a rivet through the hole in the wheel house liner and lower front fascia and drive four into the front fender flare molding, wheel house liner and front fender. After that, replace the wheel and tire, taking care to tighten the wheel nuts to 136 Nm (100 ft. lbs.).