How to Remove and Replace the Drive Belt on 3.7L/4.7L Engines on Dodge Ram 1500?

When changing the drive belt on a 3.7L or 4.7L engine, look at all of the pulleys to check their status first. During installation, the serpentine accessory drive belt needs to be positioned appropriately so the engine does not overheat because of an incorrectly rotating water pump. Making sure that the belt is routed well and all V-grooves touch the V-shaped area on the pulleys is very important when installing the accessory drive belt. Pull the new belt around every pulley, except the idler pulley and, finally, turn the tensioner arm so that it rests at its full tightening point. Put the belt around the idler pulley and have the tensioner turn into the belt so that the belt slides on each pulley. Check the belt wear indicator after installation; for 4.7L engines, the space between the tang and the housing stop (view A) cannot be more than 24 mm (0.94 inches). Should the test result be higher than the stated value, exchange the serpentine accessory drive belt.

How to Install the Drive Belt on 3.7L/4.7L Engines on Dodge Ram 1500?

Before you install the serpentine accessory drive belt, check all pulleys and make sure the belt's route will not lead to engine overheating from a wrong water pump rotation. The accessory drive belt should be guided so all of its V-grooves line up with the corresponding pulleys. Put the belt over every pulley except the idler pulley, then twist the tensioner arm all the way until it stops. Put the belt around the idler pulley and slowly allow the tensioner to drop the tension, so the belt moves onto all the pulleys. Once you have fitted the drive belt, check the belt wear indicator on 4.7L engines; the space between the tang and the inside housing must not measure over 24 mm (0.94 inches). When the measurement is beyond the requirement, change the accessory drive belt.

OEM Dodge Ram 1500 Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Drive Belts found

View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53010303AC
$69.07 MSRP: $105.00
You Save: $35.93 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53010303AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Ram 1500 | LT, Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53032132AL
$47.81 MSRP: $70.85
You Save: $23.04 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032132AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2008 Dodge Ram 1500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 5135746AA
$54.45 MSRP: $80.70
You Save: $26.25 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032125AD, 53032380AE, 53032380AC, 53032380AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Dodge Ram 1500 | Laramie, SLT, ST | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 4593852AB
$47.91 MSRP: $68.85
You Save: $20.94 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Replaces: 4593852AA, 4593665AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53032037AM
$39.38 MSRP: $58.35
You Save: $18.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032037AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Dodge Ram 1500 | Laramie, SLT, ST, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53032434AC
$2.80 MSRP: $16.10
You Save: $13.30 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Accessory Drive
- Replaces: 53032434AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 1500 | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53032433AC
$79.43 MSRP: $131.00
You Save: $51.57 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Accessory Drive
- Replaces: 53032433AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 1500 | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53032520AA
$109.59 MSRP: $161.00
You Save: $51.41 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Accessory Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2001 Dodge Ram 1500 | LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 55111074AC
$32.96 MSRP: $48.85
You Save: $15.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Coolant Recovery Bottle; Engine, Washer, Radiator Caps; Serpentine & V-Belts; Reservoir Cap; Filler Cap; Reservoir Tank Cap; Recovery Tank Cap; Cap
- Replaces: 55111074AA, 4682828, 5017468AA, 55111074AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 1500 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 5037206AE
$48.04 MSRP: $71.45
You Save: $23.41 (33%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 5037206AD, 5037206AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Ram 1500 | SRT-10 | 10 Cyl 8.3 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53032307AC
$63.38 MSRP: $89.45
You Save: $26.07 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Dodge Ram 1500 | Laramie, SLT, ST | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53010278AB
$46.66 MSRP: $101.00
You Save: $54.34 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Alternator Belt; Power Steering Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 1500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Belt - Serpentine Part Number: 68027636AB
$52.48 MSRP: $77.95
You Save: $25.47 (33%)
ADD TO CART
Product Specifications
- Other Name: BELT-SERPENTINE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Ram 1500 | SLT, ST, SXT, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: B0013481
Product Specifications
- Other Name: Belt; Air Pump; Various belts for air pump and fan drive, multiple lengths available.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 1500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53010277
Product Specifications
- Other Name: Belt-7Pk X 2476 Long; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, Drive, W/Air Condition, W/Power Steering; Belt, Serpentine, W/Air Condition; Belt, Alternator, Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 1500 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53010286AB
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Alternator Belt
- Replaces: 53010286
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 1500 | Base | 3.9L V6, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53032308AB
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 1500 | Laramie, SLT, ST | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53010308
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2001 Dodge Ram 1500 | LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53010304AC
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Ram 1500 | LT, Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Serpentine Belt Part Number: 53010296
Product Specifications
- Other Name: Belt-7Pk 2896; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, W/Air Conditioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 1500 | Base | 8 Cyl 5.9 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

Dodge Ram 1500 Drive Belt

Choose OEM Drive Belt that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Drive Belt follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Drive Belt in Dodge Ram 1500 automobiles is an indispensable part that allows transferring the dynamism of the engine for regulating initiated parts including the alternator or the A/C compressor. Usually, the serpentine belt ensures power transfer of these parts to the crankshaft pulley depending on the automobile model. Generally, Drive Belts of Ram 1500 trucks do not need replacement before one thousand seventy-five thousand miles, but if there are sharpings such as fracturing of the belt or fraying, it is advisable to replace the belt before it damages both the parts and the engine. There is a wide range and variety of Drive Belts depending with the functions they are required to perform Such varieties include the V-belts, Multiple-groove belts and the Timing belts each of which has inherent qualities offer special benefits such as enhanced grip, flexibility as well as non-slip operations. Even though Drive Belts may transfer fewer powers than gears or chains, they are cheap, easy to service, and are not affected easily by misalignment. Due to technological development of belts such as toothed belts for power transmission and belt specializations for specific applications, Drive Belts remain indispensable in today's mechanical processes.

Dodge Ram 1500 Drive Belt Parts and Q&A

Serpentine Belt
53032132AL
Q: How to Remove and Replace the Drive Belt on 3.7L/4.7L Engines on Dodge Ram 1500?
A:
When changing the drive belt on a 3.7L or 4.7L engine, look at all of the pulleys to check their status first. During installation, the serpentine accessory drive belt needs to be positioned appropriately so the engine does not overheat because of an incorrectly rotating Water Pump. Making sure that the belt is routed well and all V-grooves touch the V-shaped area on the pulleys is very important when installing the accessory drive belt. Pull the new belt around every pulley, except the idler pulley and, finally, turn the tensioner arm so that it rests at its full tightening point. Put the belt around the idler pulley and have the tensioner turn into the belt so that the belt slides on each pulley. Check the belt wear indicator after installation; for 4.7L engines, the space between the tang and the housing stop (view A) cannot be more than 24 mm (0.94 inches). Should the test result be higher than the stated value, exchange the serpentine accessory drive belt.
Serpentine Belt
4593852AB
Q: How to Install the Drive Belt on 3.7L/4.7L Engines on Dodge Ram 1500?
A:
Before you install the serpentine accessory drive belt, check all pulleys and make sure the belt's route will not lead to engine overheating from a wrong Water Pump rotation. The accessory drive belt should be guided so all of its V-grooves line up with the corresponding pulleys. Put the belt over every pulley except the idler pulley, then twist the tensioner arm all the way until it stops. Put the belt around the idler pulley and slowly allow the tensioner to drop the tension, so the belt moves onto all the pulleys. Once you have fitted the drive belt, check the belt wear indicator on 4.7L engines; the space between the tang and the inside housing must not measure over 24 mm (0.94 inches). When the measurement is beyond the requirement, change the accessory drive belt.