Other Name: Crossmember - Rear Floor; Floor Pan Crossmember, Rear Right; Crossmember Rear Floor
Position: Rear Passenger Side
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following Vehicles:
2002-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
Dodge Ram 1500 Rear Crossmember
Choose OEM Rear Crossmember that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Rear Crossmember follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Q: How to Service and Repair a Rear Crossmember on Dodge Ram 1500?
A:
First, you should elevate and stabilize the car before you work on the rear cross-member. Should your vehicle have one, take off the transfer case skid plate. Use a transmission jack or some other secure lifting device to aid the removal process. Take off the transmission mount nuts on 2WD vehicles. After that, remove the bolts and take out the crossmember. Take out the mount nuts first, then remove both the bolts and crossmember from a 4WD vehicle.
Q: How is the Rear Crossmember Installed on Dodge Ram 1500?
A:
Install the rear cross-member on Light Duty Vehicles by fitting the crossmember (2) and bolts (4) and tighten each bolt to 102 Nm (75 ft. lbs.). After that, attach the transmission mount nuts and turn them until they are tightened to 54 Nm (40 ft. lbs.). On Heavy Duty Vehicles, put in the crossmember and tighten the bolts to 115 Nm (85 ft. lbs.), then also install the transmission mount nuts and tighten them to 54 Nm (40 ft. lbs.). Following these, take out the support for the transmission (2) and mount the transfer case skid plate if your car has one (3).