How to Service and Repair a Throttle Body on Dodge Ram 1500?

First, get the air cleaner tube out of the throttle body and afterward disconnect both of the electronic connectors to the IAC motor and TPS. Following the instructions explained earlier, next remove the control cable from the throttle body lever arm. Quickly unplug the vacuum lines at the throttle body and then take out all three bolts from the throttle body attachments. Remove the throttle body from the intake manifold and ensure the O-ring is in good shape. Check and replace the throttle body-to-intake manifold O-ring when you install the system. Clean both the mating ends of the throttle body and the intake manifold, put on the new O-ring and then set the throttle body into position on the intake manifold. Connect it to the leash using the three bolts, then tighten them to 12Nm or about 105in. lbs. After reconnecting the control cables and electrical connectors, add back the various vacuum lines needed. Then, secure the air plenum.

How to Remove and Install a Throttle Body Without Altering Engine Idle Speed on Dodge Ram 1500?

The throttle body comes with a set screw from the factory that controls how far the throttle plate can open and this screw should never be adjusted during idle speed adjustments, because the idle speed is handled by the PCM. Removal starts with air cleaner removal, then unplug the electrical wires at the MAP sensor, IAC motor and TPS. After that, pull off the vacuum line at the throttle body and remove the cables linked to the throttle body lever arm. Then, get rid of the four bolts keeping the throttle body on the manifold and set the old gasket aside. After cleaning where the throttle body and intake manifold meet, fit a new gasket in between and align the throttle body with the manifold. Get the tubes to hold the crankshaft snugly by using the four mounting bolts and tightening to 23 Nm (200 in. lbs.). Secure again the control cables, vacuum line and the electric connectors and next install the air cleaner.

OEM Dodge Ram 1500 Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Throttle Bodies found

View related parts
Dodge Ram 1500 Throttle Body Part Number: 53032837AB
$316.11 MSRP: $465.00
You Save: $148.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 53032837AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Ram 1500 | SLT, ST, SXT, TRX, TRX4 | 4.7L V8, 8 Cyl 4.7 L FLEX
View related parts
Dodge Ram 1500 Throttle Body Part Number: 4861661AB
$375.56 MSRP: $552.00
You Save: $176.44 (32%)
ADD TO CART
Product Specifications
- Other Name: Throttle; Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
- Replaces: 4861661AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Ram 1500 | ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 53032801AC
$425.94 MSRP: $626.00
You Save: $200.06 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Module.
- Replaces: 53032801AA, 53032801AB, 68060353AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Dodge Ram 1500 | Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 5114397AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Ram 1500 | Laramie, SLT, ST, TRX4 | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 5139073AB
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Ram 1500 | ST
View related parts
Dodge Ram 1500 Throttle Body Part Number: 5161805AA
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Replaces: 53032120AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 1500 | Laramie, SLT, ST | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 5037419AB
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Ram 1500 | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 53031143AC
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Dodge Ram 1500 | Laramie, SLT, ST | 6 Cyl 3.7 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 53032691AA
Product Specifications
- Replaces: 53030807AB, 53031733AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Ram 1500 | Laramie, SLT, SS/T 5.9L, ST, Sport | 5.2L V8, 5.9L V8, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 53032119AE
Product Specifications
- Replaces: 53032119AC, 53032119AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 1500 | Laramie, SLT, ST | 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 53031806AB
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2001 Dodge Ram 1500 | Laramie, ST, Sport, WS | 6 Cyl 3.9 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 5114401AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Ram 1500 | ST | 6 Cyl 3.7 L GAS
View related parts
Dodge Ram 1500 Throttle Body Part Number: 53013163AD
Product Specifications
- Replaces: 53013163AC, 53013163AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Dodge Ram 1500 | SLT, ST | 8 Cyl 4.7 L GAS

Dodge Ram 1500 Throttle Body

Choose OEM Throttle Body that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Throttle Body follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Throttle Body of Dodge Ram 1500 vehicles is a major intermediary part that controls the flow of air into the engine, this is dependent on the signal coming from the accelerator pedal. Located between the air cleaner and intake manifold, Throttle Body has a butterfly valve that controls the amount of air to go into the engine. In the previous models, Throttle Body Injection or TBI system was used, while in the contemporary cars the multi-port fuel injection along with the separate fuel delivery system is employed. Mechanical linkage has been mostly replaced by Electronic Throttle Control (ETC) to provide better dependability, and compatibility with other systems. Though throttle bodies do wear off with some amount of usage, the formation of some amount of deposit also occurs and so cleaning or replacement is required at some juncture of time; some of the parts of the throttle body are TPS and IAC valves which are replaceable.

Dodge Ram 1500 Throttle Body Parts and Q&A

Throttle Body
5037419AB
Q: How to Service and Repair a Throttle Body on Dodge Ram 1500?
A:
First, get the air cleaner tube out of the throttle body and afterward disconnect both of the electronic connectors to the IAC motor and TPS. Following the instructions explained earlier, next remove the control cable from the throttle body lever arm. Quickly unplug the vacuum lines at the throttle body and then take out all three bolts from the throttle body attachments. Remove the throttle body from the Intake Manifold and ensure the O-ring is in good shape. Check and replace the throttle body-to-intake manifold O-ring when you install the system. Clean both the mating ends of the throttle body and the intake manifold, put on the new O-ring and then set the throttle body into position on the intake manifold. Connect it to the leash using the three bolts, then tighten them to 12Nm or about 105in. lbs. After reconnecting the control cables and electrical connectors, add back the various vacuum lines needed. Then, secure the air plenum.
Throttle Body
53031806AB
Q: How to Remove and Install a Throttle Body Without Altering Engine Idle Speed on Dodge Ram 1500?
A:
The throttle body comes with a set screw from the factory that controls how far the throttle plate can open and this screw should never be adjusted during idle speed adjustments, because the idle speed is handled by the PCM. Removal starts with air cleaner removal, then unplug the electrical wires at the MAP Sensor, IAC motor and TPS. After that, pull off the vacuum line at the throttle body and remove the cables linked to the throttle body lever arm. Then, get rid of the four bolts keeping the throttle body on the manifold and set the old gasket aside. After cleaning where the throttle body and Intake Manifold meet, fit a new gasket in between and align the throttle body with the manifold. Get the tubes to hold the crankshaft snugly by using the four mounting bolts and tightening to 23 Nm (200 in. lbs.). Secure again the control cables, vacuum line and the electric connectors and next install the air cleaner.