How to Service a Blower Motor on Dodge Ram 2500?

The first step to servicing the blower motor is to cut the negative battery cable. After that, pull out the blower motor cooling tube from the nipple on the housing and take out the blower motor wire harness from its retainer. Disconnect the blower motor wire harness connector from the HVAC housing and then remove the three screws holding the blower motor and wheel to the HVAC housing. Once out of the housing, carefully lower down both the blower motor and its housing cover, along with the wheel. Ease out the blower wheel retainer clip and take the wheel from the shaft on the blower motor. If simply the blower motor wheel is being installed, press the wheel's hub on the motor shaft with the two flats lining up. Fix the retainer clip across the hub of the blower wheel, with each ear of the clip aligned over a flat on each shaft. Make sure the seal of the blower motor is fitted correctly onto the blower motor housing. Attach the cover and the blower motor along with the wheel assembly in the HVAC housing by turning in the three screws to 2.2 Nm (20 in. lbs.). Secure the wire harness connector from the blower motor to the HVAC housing wire harness, place the blower motor wire harness into the wire harness retainer, join the cooling tube on the blower motor to the nipple on the housing and reconnect the battery negative cable at the end.

How to Install a Blower Motor in an HVAC System on Dodge Ram 2500?

Place the blower motor inside the bottom of the HVAC housing. Fix the blower motor securely to the HVAC housing with the three screws, but tighten them just so that they reach 1.7 Nm (15 in. lbs.). Link the end of the HVAC wire harness lead to the blower motor and place one end into each retainer. Then, put on the cowl trim panel on the passenger side and once again secure the negative battery cable.

OEM Dodge Ram 2500 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Blower Motors found

View related parts
Dodge Ram 2500 Blower Motor Part Number: 5015866AA
$211.97 MSRP: $296.00
You Save: $84.03 (29%)
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor; Blower Assembly; Motor Blower With Wheel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Blower Motor Part Number: 68048903AB
$196.01 MSRP: $291.00
You Save: $94.99 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor; Blower Assembly; Motor Blower With Wheel
- Replaces: 68048903AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Blower Motor Part Number: 5096255AA
$210.74 MSRP: $314.00
You Save: $103.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; HVAC Blower Motor; HVAC Blower Motor and Wheel; Blower Assembly; Motor Blower With Wheel Includes: Motor, Fan, Clamp, Screws, Seal.
- Replaces: 5096256AA, 68031462AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Blower Motor Part Number: 68048905AB
$249.26 MSRP: $369.00
You Save: $119.74 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor; Blower Assembly; Control Module; Motor Blower With Wheel
- Replaces: 68048905AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Blower Motor Part Number: 4778417
Product Specifications
- Other Name: Motor - Blower; HVAC Blower Motor; Blower Assembly; Motor, Blower; Motor Blower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1998 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Blower Motor Part Number: 4720006
Product Specifications
- Other Name: Motor - Blower; HVAC Blower Motor; Blower Assembly; Motor, Blower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Ram 2500 Blower Motor

Choose OEM Blower Motor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blower Motor follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 2500 Blower Motor is a vital component of the air conditioning system that meant for distributing the hot or cool air inside the car. It works with the assistance of providing electricity to the fan that helps maintain or adjust the flow of air as per the driver's choice. The Blower Motor is wired to a module that enables the users to set the functionality by switching through temperatures, for instance, during cold mornings to defog windows or a hot day after the car has been parked under the sun. In the course of the production of Dodge Ram 2500 there might have been used several types of Blower Motors all depending on the type of climate control system used in the car. Although some cars use a Single Blower Motor, other cars especially those that are bigger use more than one motor to facilitate improved air circulation. The main contrasts between these kinds often pertain to the location and hierarchical level of the controls and decision making which in turn influences the performance and the level of risk. Thus, it is important to properly maintain and replace the Blower Motor and it controls to ensure good performance in Dodge Ram 2500.

Dodge Ram 2500 Blower Motor Parts and Q&A

Blower Motor
5015866AA
Q: How to Service a Blower Motor on Dodge Ram 2500?
A:
The first step to servicing the blower motor is to cut the negative Battery Cable. After that, pull out the blower motor cooling tube from the nipple on the housing and take out the blower motor wire harness from its retainer. Disconnect the blower motor wire harness connector from the HVAC housing and then remove the three screws holding the blower motor and wheel to the HVAC housing. Once out of the housing, carefully lower down both the blower motor and its housing cover, along with the wheel. Ease out the blower wheel retainer clip and take the wheel from the shaft on the blower motor. If simply the blower motor wheel is being installed, press the wheel's hub on the motor shaft with the two flats lining up. Fix the retainer clip across the hub of the blower wheel, with each ear of the clip aligned over a flat on each shaft. Make sure the seal of the blower motor is fitted correctly onto the blower motor housing. Attach the cover and the blower motor along with the wheel assembly in the HVAC housing by turning in the three screws to 2.2 Nm (20 in. lbs.). Secure the wire harness connector from the blower motor to the HVAC housing wire harness, place the blower motor wire harness into the wire harness retainer, join the cooling tube on the blower motor to the nipple on the housing and reconnect the battery negative cable at the end.
Blower Motor
5096255AA
Q: How to Install a Blower Motor in an HVAC System on Dodge Ram 2500?
A:
Place the blower motor inside the bottom of the HVAC housing. Fix the blower motor securely to the HVAC housing with the three screws, but tighten them just so that they reach 1.7 Nm (15 in. lbs.). Link the end of the HVAC wire harness lead to the blower motor and place one end into each retainer. Then, put on the cowl trim panel on the passenger side and once again secure the negative Battery Cable.