How to Remove and Service the Bumper on a Dodge Ram 2500?

The first thing to do is raise and support the vehicle to remove the rear bumper. Then remove the license plate and unbolt the plate that is behind it. If the vehicle is equipped with a trailer light connector, you will want to disconnect the electrical connector for the license plate light and the trailer light connector. Next remove the two bolts that run along the front upper edge of the bumper near the ends of the frame. Remove the four bolts that secure the bumper support brackets to the trailer hitch, but, first, support the bumper with an appropriate lifting device.

How to Install a Bumper on the Rear on Dodge Ram 2500?

Connect the trailer hitch pins to the holes in the bumper and align both together before installing the bumper. Place the hitch bolts into the support bracket for a loose fit. Hold the upper edge of the front part against the bolts on the trailer hitch, tighten them to 54 Nm (40 ft. lbs.) and fasten the hitch pin. Attach the reinforcement to the hitch bolts 2 and tighten until you reach 54 Nm (40 ft. lbs.). Bolts on the left bumper bracket should be torqued to 3 to 54 Nm (40 ft. lbs.) and bolts on the right bumper bracket to the same tension. When available, put together the trailer light and license plate light wires by following the factory connections. Next, attach the license plate to the framework.

OEM Dodge Ram 2500 Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Bumpers found

View related parts
Dodge Ram 2500 Bumper Assembly, Rear Part Number: 55277451AE
$689.29 MSRP: $1011.30
You Save: $322.01 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper - Step; Bumper, Rear; Bumper Assembly Step
- Position: Rear
- Replaces: 55277451AA, 55277451AD, 55277451AC, 55277451AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper, Front Part Number: 68045698AB
$828.98 MSRP: $1215.00
You Save: $386.02 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper - Front; Bumper Face Bar, Front; Bumper Front
- Position: Front
- Replaces: 68045698AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Assembly, Rear Part Number: 55077107AN
$814.10 MSRP: $1185.00
You Save: $370.90 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper - Rear; Bumper Face Bar, Rear; Bumper, Rear
- Position: Rear
- Replaces: 55077107AD, 55077107AF, 55077107AI, 55077107AH, 55077107AJ, 55077107AG, 55077107AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper, Front Part Number: 68045699AB
$800.36 MSRP: $1170.00
You Save: $369.64 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper - Front; Bumper Face Bar, Front; Bumper Front
- Position: Front
- Replaces: 68045699AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper, Front Part Number: 1MQ02TZZAB
$893.10 MSRP: $1300.00
You Save: $406.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper - Front; Bumper Face Bar, Front; Bumper Front
- Position: Front
- Replaces: 1MQ02CDMAB, 1MQ021DMAA, 1MQ02CDMAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Lower Part Number: 68001349AA
$286.65 MSRP: $422.00
You Save: $135.35 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front, Front Lower
- Position: Front Lower
- Replaces: 1AT30TZZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper, Gray, Rear Part Number: 68049746AB
$499.22 MSRP: $727.00
You Save: $227.78 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper - Step; Bumper Face Bar, Rear; Bumper Step Bumper Only; Bumper Step
- Position: Rear
- Replaces: 68049746AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper, Rear Part Number: 68049769AB
$709.90 MSRP: $1040.00
You Save: $330.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper - Step; Bumper Face Bar, Rear; Bumper Step
- Position: Rear
- Replaces: 68049769AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper, Rear Part Number: 68049781AB
$709.90 MSRP: $1045.00
You Save: $335.10 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper - Step; Bumper Face Bar, Rear; Bumper Step
- Position: Rear
- Replaces: 68049781AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 5073001AF
$1055.69 MSRP: $1540.00
You Save: $484.31 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 5073001AE, 5073001AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 2500 | Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 68001358AA
$284.38 MSRP: $420.00
You Save: $135.62 (33%)
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front, Front Lower
- Position: Front
- Replaces: 1AT31TZZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Assembly, Rear Part Number: 68049864AB
$571.36 MSRP: $833.00
You Save: $261.64 (32%)
Product Specifications
- Other Name: Bumper - Step; Bumper Face Bar, Rear; Bumper; Bumper Step
- Position: Rear
- Replaces: 68049864AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 5030101AB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Ram 2500 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper, Front Part Number: 55076599AG
Product Specifications
- Other Name: Bumper - Front; Bumper Face Bar, Front
- Position: Front
- Replaces: 55076599AD, 55076599AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
Dodge Ram 2500 Bumper, Gray, Front Part Number: 1MQ01TZZAB
$587.39 MSRP: $857.00
You Save: $269.61 (32%)
Product Specifications
- Other Name: Bumper - Front; Bumper Face Bar, Front
- Position: Front
- Replaces: 1MQ01CDMAB, 1MQ01CDMAA, 1MQ01LAUAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Assembly, Rear Part Number: 68004420AB
$676.70 MSRP: $986.00
You Save: $309.30 (32%)
Product Specifications
- Other Name: Bumper - Step; Bumper Face Bar, Rear; Bumper
- Position: Rear
- Replaces: 55077226AD, 68004420AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 5016301AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Bumper, Front Part Number: 5011476AD
Product Specifications
- Other Name: Bumper - Front; Bumper Front
- Position: Front
- Replaces: 5011476AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2001 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
Dodge Ram 2500 Bumper, Front Part Number: 4874877AB
Product Specifications
- Other Name: Fascia - Front; Valance
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1998 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Gray, Front Part Number: 68505649AA
Product Specifications
- Other Name: Bumper - Front; Bumper Face Bar, Front; Face Bar
- Position: Front
- Replaces: 1AR81ZSPAB, 1AR81ZSPAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009, 2003-2004 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

Dodge Ram 2500 Bumper

Choose OEM Bumper that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Bumper follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 2500 Bumper Parts and Q&A

Bumper Cover, Gray, Front Upper
55077762AA
Q: How to Remove and Service the Bumper on a Dodge Ram 2500?
A:
The first thing to do is raise and support the vehicle to remove the rear bumper. Then remove the license plate and unbolt the plate that is behind it. If the vehicle is equipped with a trailer light connector, you will want to disconnect the electrical connector for the license plate light and the trailer light connector. Next remove the two bolts that run along the front upper edge of the bumper near the ends of the frame. Remove the four bolts that secure the bumper support brackets to the trailer hitch, but, first, support the bumper with an appropriate lifting device.
Bumper Assembly, Rear
55077107AN
Q: How to Install a Bumper on the Rear on Dodge Ram 2500?
A:
Connect the trailer hitch pins to the holes in the bumper and align both together before installing the bumper. Place the hitch bolts into the support bracket for a loose fit. Hold the upper edge of the front part against the bolts on the trailer hitch, tighten them to 54 Nm (40 ft. lbs.) and fasten the hitch pin. Attach the reinforcement to the hitch bolts 2 and tighten until you reach 54 Nm (40 ft. lbs.). Bolts on the left bumper bracket should be torqued to 3 to 54 Nm (40 ft. lbs.) and bolts on the right bumper bracket to the same tension. When available, put together the trailer light and license plate light wires by following the factory connections. Next, attach the license plate to the framework.