How to install the front bumper cover on Dodge Ram 2500?

To install the front bumper fascia on ST/SLT/SLT+ models, first attach the left and right inboard bumper to bracket attachments and then install the fascia and step pad. Initially install the fascia, then install the close out panel, applying full seating to the 6 lower clips. Afterward, install four new upper push pin fasteners and position the step pad onto the fascia, ensuring that the attachment clips are fully seated. Position the fascia with a 19 mm (0.75 inch) gap at the fender and install two screws at the fascia trailing edges. The left and right inboard bumper to bracket attachments need to be secured for SPORT models. Place the fascia on the bumper and then place the step pad on the fascia and fully seat the attachment clips. Fit four new fasteners, upper push pin. Next, five lower screws. Finally, consider three screws at the trailing edge of the fascia.

How to remove the front Bumper Cover or fascia on Dodge Ram 2500?

To take off the front bumper cover or fascia, first remove the two screws at each trailing edge of the fascia on ST/SLT/SLT+ models. Then remove the four push pin fasteners from the upper edge of the close out panel. Make use of a trim stick or similar tool to carefully disengage the six lower clips and remove the close out panel. After this, remove and discard the four push pin fasteners so that you can take off the fascia. To remove the front bumper from the sport models, raise and support the vehicle. Then remove three screws at each trailing edge of the fascia and five screws below. Remove the 4 upper push pins, use a trim stick to unclamp the 6 lower clips, and then discard the close out panel. After that, gently pull the step pad and pull the fascia out at the wheels to unclip it from the car.

OEM Dodge Ram 2500 Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Bumper Covers found

View related parts
Dodge Ram 2500 Bumper Cover, Gray, Front Upper Part Number: 55077762AA
$172.22 MSRP: $255.00
You Save: $82.78 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front Upper; Bumper Cover, Front; Upper Cover; Fascia Front Upper Primed; Fascia Front Bumper; Fascia Front Upper
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 5073002AC
$254.93 MSRP: $375.00
You Save: $120.07 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Replaces: 5073002AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 2500 | Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 5013818AE
$567.92 MSRP: $828.00
You Save: $260.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Replaces: 5013818AC, 5013818AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
Dodge Ram 2500 Bumper Cover, Front Upper Part Number: ZA17TZZAA
$172.22 MSRP: $254.00
You Save: $81.78 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front Bumper; Bumper Cover, Front, Front Upper; Upper Cover; Upper Panel; Fascia Front Bumper Paint As Required; Fascia Front Bumper Upper; Fascia Front Bumper
- Position: Front Upper
- Replaces: ZA17CDMAA, ZA17WS2AA, ZA17GW7AA, ZA17ZBJAA, ZA17ARHAA, ZA17WB7AA, ZA17DX8AA, ZA17PR4AA, ZA17AJCAA, ZA17AXRAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Lower Part Number: 68001349AA
$286.65 MSRP: $422.00
You Save: $135.35 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front, Front Lower
- Position: Front Lower
- Replaces: 1AT30TZZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, Sport, ST, SXT, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 5073001AF
$760.28 MSRP: $1110.00
You Save: $349.72 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 5073001AE, 5073001AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 2500 | Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 68001358AA
$284.38 MSRP: $420.00
You Save: $135.62 (33%)
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front, Front Lower
- Position: Front
- Replaces: 1AT31TZZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, Sport, ST, SXT, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 5030101AB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Ram 2500 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Gray, Front Part Number: 55077355AC
Product Specifications
- Other Name: Plate - Front Bumper; Bumper Cover, Front; Fascia Front Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 2500 | Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Front Part Number: 5016301AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Bumper Cover, Gray, Front Part Number: 68505649AA
Product Specifications
- Other Name: Bumper - Front; Bumper Face Bar, Front; Face Bar
- Position: Front
- Replaces: 1AR81ZSPAB, 1AR81ZSPAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009, 2003-2004 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

Dodge Ram 2500 Bumper Cover

Choose OEM Bumper Cover that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Bumper Cover follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Bumper Cover is a soft body panel that sits on top of your truck's rigid bumper structure. It is cosmetic in nature, but also offers some protective qualities. The Dodge Ram 2500 Bumper Cover adds aesthetic appeal to your vehicle. As the outermost component of the bumper assembly, the Bumper Cover smooths out body lines so that the truck does not look unfinished. It is often crafted to help with airflow slipping over the front end for more optimized speed and fuel efficiency gains. For the Ram 2500, the unit tries to find a proper balance between airflow management and looks. The part is fitted over structural parts which may also include airflow passages to the radiator or other heat exchanges, along with openings for fog light, parking light, turn signal, or tow eye anchor. Bezels, grilles, decorative inserts, or a small Bumper Cover that conceals an unused anchor point can trim these cavities. If the Dodge truck does not come with certain lights, matching inserts provide a consistent surface behind the primary Bumper Cover. A cracked or scuffed panel from a collision or some road debris can spoil the looks of your Dodge Ram 2500. Replacing the Dodge Ram 2500 Bumper Cover restores that look and also prevents adjacent bumper parts from getting damaged. Thus, it will help your Dodge Ram 2500 stay in harmony during everyday driving.

Dodge Ram 2500 Bumper Cover Parts and Q&A

Bumper Cover, Front Lower
68001349AA
Q:
How to install the front bumper cover on Dodge Ram 2500?
A:
To install the front bumper fascia on ST/SLT/SLT+ models, first attach the left and right inboard bumper to bracket attachments and then install the fascia and step pad. Initially install the fascia, then install the close out panel, applying full seating to the 6 lower clips. Afterward, install four new upper push pin fasteners and position the step pad onto the fascia, ensuring that the attachment clips are fully seated. Position the fascia with a 19 mm (0.75 inch) gap at the fender and install two screws at the fascia trailing edges. The left and right inboard bumper to bracket attachments need to be secured for SPORT models. Place the fascia on the bumper and then place the step pad on the fascia and fully seat the attachment clips. Fit four new fasteners, upper push pin. Next, five lower screws. Finally, consider three screws at the trailing edge of the fascia.
Bumper Cover, Gray, Front Upper
55077762AA
Q:
How to remove the front Bumper Cover or fascia on Dodge Ram 2500?
A:
To take off the front bumper cover or fascia, first remove the two screws at each trailing edge of the fascia on ST/SLT/SLT+ models. Then remove the four push pin fasteners from the upper edge of the close out panel. Make use of a trim stick or similar tool to carefully disengage the six lower clips and remove the close out panel. After this, remove and discard the four push pin fasteners so that you can take off the fascia. To remove the front bumper from the sport models, raise and support the vehicle. Then remove three screws at each trailing edge of the fascia and five screws below. Remove the 4 upper push pins, use a trim stick to unclamp the 6 lower clips, and then discard the close out panel. After that, gently pull the step pad and pull the fascia out at the wheels to unclip it from the car.