First, you should put in new plastic inserts 4 into the front fender 7 if that is necessary. Attach the front fender to the body and then loosely secure all the fender retaining bolts. Set the front fender in place and polish it as needed. Start by tightening bolts 2 and 6 to 9 Nm (80 in. lbs.) and after that, tighten bolts 1, 3 and 5 to 12.5 Nm (9 ft. lbs.). Put the splash shield, then the headlamp module, then the cowl grille and if there is one, the
Battery Tray. For the final part, put the
Antenna in place.