How to Install a Hood Hinge on Dodge Ram 2500?

Put the hood hinge onto the fender rail and then press it rearward to where the fit is correct. Apply bolts to the end of the hood hinge and tighten them to 20 Nm (15 ft. lbs.) to attach it to the fender rail. Following that, put on the bolt that holds the front fender to the hood hinge and tighten it to 12.5 Nm (9 ft. lbs.). Loosen the nuts that hold the hood, place the hood according to the marks from before and tighten them to 23 Nm (17 ft. lbs.). Insert the support cylinder and if you must, arrange the hood in the correct location. The next step is to put on the wheelhouse splash shield and the cowl grille.

Can You Replace the Hood Hinge Without Removing the Hood on Dodge Ram 2500?

You only have to remove one hood hinge at a time, so you don't need to remove the entire hood. Start by fitting the hood hinge on the fender rail and sliding it all the way rearward into place. Attach the hood hinge to the fender rail with bolts and tighten them to 20 Nm (15 ft. lbs.). Then, put in the bolt that connects the front fender to the hood, secure it to 12.5 Nm (9 ft. lbs.) and tighten it. First, fit the two nuts loosely into the hood hinge holes, then place the hood back into position using the marks made during the removal and tighten to 23 Nm (17 ft. lbs.). Mount the support cylinder and if needed, get the hood to its right position. Install both the wheelhouse splash shield and the cowl grille.

OEM Dodge Ram 2500 Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hood Hinges found

View related parts
Dodge Ram 2500 Hinge Part Number: 55075794AC
$243.60 MSRP: $360.00
You Save: $116.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Hinge, Front Driver Side Part Number: 5160345AC
$72.81 MSRP: $110.00
You Save: $37.19 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 5160345AB, 5160345AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Hinge, Front Passenger Side Part Number: 5160344AC
$55.12 MSRP: $112.00
You Save: $56.88 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 5160344AB, 5160344AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Hinge, Front Passenger Side Part Number: 4589178AA
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 55275840AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Hinge, Front Driver Side Part Number: 4589179AA
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 55275841AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Hinge Part Number: 55075795AC
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Hinge Part Number: 55076271AB
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood Spare To Setup 55076271Ab
- Replaces: 55076271, 55076271AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 5.2L V8, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
Dodge Ram 2500 Hinge Part Number: 55076270AB
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood Spare To Setup 55076271Ab; Hinge Hood
- Replaces: 55076270AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS, 8.0L V10

Dodge Ram 2500 Hood Hinge

Choose OEM Hood Hinge that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Hood Hinge follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 2500 Hood Hinge Parts and Q&A

Hinge, Front Passenger Side
4589178AA
Q: How to Install a Hood Hinge on Dodge Ram 2500?
A:
Put the hood hinge onto the Fender rail and then press it rearward to where the fit is correct. Apply bolts to the end of the hood hinge and tighten them to 20 Nm (15 ft. lbs.) to attach it to the fender rail. Following that, put on the bolt that holds the front fender to the hood hinge and tighten it to 12.5 Nm (9 ft. lbs.). Loosen the nuts that hold the hood, place the hood according to the marks from before and tighten them to 23 Nm (17 ft. lbs.). Insert the support cylinder and if you must, arrange the hood in the correct location. The next step is to put on the wheelhouse splash shield and the cowl grille.
Hinge, Front Driver Side
4589179AA
Q: Can You Replace the Hood Hinge Without Removing the Hood on Dodge Ram 2500?
A:
You only have to remove one hood hinge at a time, so you don't need to remove the entire hood. Start by fitting the hood hinge on the Fender rail and sliding it all the way rearward into place. Attach the hood hinge to the fender rail with bolts and tighten them to 20 Nm (15 ft. lbs.). Then, put in the bolt that connects the front fender to the hood, secure it to 12.5 Nm (9 ft. lbs.) and tighten it. First, fit the two nuts loosely into the hood hinge holes, then place the hood back into position using the marks made during the removal and tighten to 23 Nm (17 ft. lbs.). Mount the support cylinder and if needed, get the hood to its right position. Install both the wheelhouse splash shield and the cowl grille.