How to Remove and Replace Exhaust Valve and Intake Valves in an Engine on Dodge Ram 2500?

You should always begin by washing and discarding any burned, warped or cracked valves. Reach into the motor with a dependable cleaner for removing carbon and varnish left in the valve guides. Test the valve stems; when the wear is more than 0.051 mm (0.002 inch), it's time to replace the valve. Spray each valve stem with lubrication oil and push them into the cylinder head. After regrounding the valves or seats, measure the length of the valve stem and change the cylinder head if it's too long. All valve guides should have new seals installed and then the valve springs and valve retainers are fitted. Press the valve springs down with the special Valve Spring Compressor Tool tool #C-3422 and adapter #8464, insert the locks, then release the tool. If the valves or seats are ground, place a micrometer near the top surface of the installed spring and read its height from the bottom surface of the spring retainer in the cylinder head. The cylinder head should be installed as the last step.

How to Install Exhaust Valve and Intake Valves on Dodge Ram 2500?

When you are installing the intake and exhaust valves, first wash them and once cleaned, get rid of any that look burned, bent or chipped. Clear carbon and varnish from within the valve guides with a quality guide cleaner. If the stem wears greater than 0.051 mm (0.002 inch), you should change the valve. Coat the stems with clean oil and pop them into the cylinder head. Should the valves be reground and valve stems are too long, then replace the cylinder head. Replace the valve seals (3), the valve springs (6) and the retainers (2). Install the Valve Spring Tool C-3422-D into the valve train, using the Valve Spring Adapter 8464 to compress the springs. Then, put the valve keepers in and release the tool. In the event of ground valves or seats, measure how high the springs sit from the bottom of the spring seat in the cylinder head all the way down to the spring retainer. After that, place the cylinder head into its space.

OEM Dodge Ram 2500 Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Valves found

View related parts
Dodge Ram 2500 Exhaust Valve Part Number: 53022088AD
$35.55 MSRP: $53.20
You Save: $17.65 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust; Valve Exhaust Standard
- Replaces: 53022088AC, 53022088AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Exhaust Valve Part Number: 53021551AB
$34.98 MSRP: $49.45
You Save: $14.47 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust; Valve Exhaust Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2008 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Exhaust Valve Part Number: 5140913AA
$48.59 MSRP: $98.30
You Save: $49.71 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust; Valve Exhaust Standard Includes Locks And Seals; Valve Exhaust Standard
- Replaces: 5011877AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2010 Dodge Ram 2500 | 5.9L L6
View related parts
Dodge Ram 2500 Exhaust Valve Part Number: 53006724
Product Specifications
- Other Name: Valve - Exhaust; Valve Exhaust Standard; Valve, Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2002 Dodge Ram 2500 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Exhaust Valve Part Number: 53005864
Product Specifications
- Other Name: Valve - Exhaust; Valve Exhaust Standard; Valve, Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2003 Dodge Ram 2500 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
View related parts
Dodge Ram 2500 Exhaust Valve Part Number: 68002237AA
Product Specifications
- Other Name: Valve - Exhaust; Valve Exhaust Standard Includes Locks And Seals; Valve Exhaust Standard; Valve Kit Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 2500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL

Dodge Ram 2500 Exhaust Valve

Choose OEM Exhaust Valve that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Exhaust Valve follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Exhaust Valve is one of the most important parts of the Dodge Ram 2500 Styling and functional features of the Dodge Ram 2500 series heavily relies on the exhaust valve. Located in the engine cylinders, the Exhaust Valve is specifically intended to effectively dispose burnt gases for proper functionality of the engine hence, offers protection against problems like inadequate combustion, uneven vibration and noise of the engine while idling, and low fuel consumption. This consistency is well meaning in variance of different models of Ram 2500 since different models may apply diverse Exhaust Valves depending on the model's structure and functions. The Engine component specifically, depicts the quality of the Exhaust Valve which impacts the performance and durability of the Dodge Ram 2500 which is quite famous for its robust build. This, in turn, means that by preserving the Exhaust Valve, the owners of Dodge Ram 2500 enhance its efficiency as well as safety while driving. First of all, in the automotive market, there is one linkage that can be mentioned - Dodge Ram 2500 Exhaust Valve that is durable and very precise, which is critical for heavy workload assignments. In addition, perfect compatibility of the Exhaust Valve across different models of Ram 2500 is the key evidence that this car part plays a significant role in sustaining the reputation of the car's performance. The Dodge Ram 2500 has been a consistent trendsetter in the market mainly due to its reliability and power, which is made possible with the help of the Exhaust Valve.

Dodge Ram 2500 Exhaust Valve Parts and Q&A

Exhaust Valve
53021551AB
Q: How to Remove and Replace Exhaust Valve and Intake Valves in an Engine on Dodge Ram 2500?
A:
You should always begin by washing and discarding any burned, warped or cracked valves. Reach into the motor with a dependable cleaner for removing carbon and varnish left in the valve guides. Test the valve stems; when the wear is more than 0.051 mm (0.002 inch), it's time to replace the valve. Spray each valve stem with lubrication oil and push them into the cylinder head. After regrounding the valves or seats, measure the length of the valve stem and change the cylinder head if it's too long. All valve guides should have new seals installed and then the valve springs and valve retainers are fitted. Press the valve springs down with the special Valve Spring Compressor Tool tool #C-3422 and adapter #8464, insert the locks, then release the tool. If the valves or seats are ground, place a micrometer near the top surface of the installed spring and read its height from the bottom surface of the spring retainer in the cylinder head. The cylinder head should be installed as the last step.
Exhaust Valve
53022088AD
Q: How to Install Exhaust Valve and Intake Valves on Dodge Ram 2500?
A:
When you are installing the intake and exhaust valves, first wash them and once cleaned, get rid of any that look burned, bent or chipped. Clear carbon and varnish from within the valve guides with a quality guide cleaner. If the stem wears greater than 0.051 mm (0.002 inch), you should change the valve. Coat the stems with clean oil and pop them into the cylinder head. Should the valves be reground and valve stems are too long, then replace the cylinder head. Replace the valve seals (3), the valve springs (6) and the retainers (2). Install the Valve Spring Tool C-3422-D into the valve train, using the Valve Spring Adapter 8464 to compress the springs. Then, put the valve keepers in and release the tool. In the event of ground valves or seats, measure how high the springs sit from the bottom of the spring seat in the cylinder head all the way down to the spring retainer. After that, place the cylinder head into its space.