How to Maintain and Fix a Rod Bearing on Dodge Ram 2500?

You should measure the connecting rod bore after you remove the bearings and tighten the bolts to 100 Nm (73 ft. lbs.) first. Next, measure the inside of the connecting rod bore, keeping both the bearings and bolts in place and tightened to the right level, checking inside the 20° arc at both sides and remaining 90° from the parting line. Note the lengths of the shortest and the longest diameters. Measuring the diameter of the rod journal at the proper place, you can then determine the average diameter for the journal. To get the minimum bearing clearance, take away the smallest diameter of the rod that fits the bearing and the average journal diameter from both sides of the crankshaft. For best results, measure the gap space between the connecting rod bore with the largest hole and the bearings installed on each crankshaft journal. Should the crankshaft fit within the limits, put in a new bearing; otherwise, grind it and place oversized rod bearings in next-size holes.

What Are the Key Steps for Proper Rod Bearing Installation and Lubrication on Dodge Ram 2500?

Once every rod is fitted to a bank, refrain from alternating, as pistons and connecting rods do not go between banks. Put markings on the bearing caps when taking them off, since different caps have different fit. A small V-shaped cut is included on each bearing cap parting face; set up the lower bearing shell with the V-groove facing the one provided by the cap to maintain lubrication for the cylinder wall in the other bank. Adjust the bearing shells so that the tangs are inserted into the special grooves in both the rods and caps. No more than 0.025 mm (0.001 inch) should be present as taper or out-of-round on any crankshaft journals. The thickness of bearings is offered in 0.025 mm (0.001 inch), 0.051 mm (0.002 inch), 0.076 mm (0.003 inch), 0.254 mm (0.010 inch) and 0.305 mm (0.012 inch) sizes less than the nominal size. Install each bearing in a pair, do not mix a brand-new bearing with an old half and do not file off material from the bearings or bearings caps.

OEM Dodge Ram 2500 Rod Bearing

Engine Connecting Rod Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Rod Bearings found

View related parts
Dodge Ram 2500 Connecting Rod Bearing Part Number: 68029429AC
$16.02 MSRP: $23.55
You Save: $7.53 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing; Bearings; Bearing Kit Connecting Rod Standard
- Replaces: 68029429AB, 68029429AA, 68029429AI, 68060359AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 8 Cyl 5.7 L GAS
- 2006 Dodge Ram 2500 | 5.7L V8
View related parts
Dodge Ram 2500 Bearing Part Number: 5102123AA
$33.86 MSRP: $49.90
You Save: $16.04 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearings; Bearing Connecting Rod Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 2500 | Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 2500 Bearing Part Number: 68001948AA
$38.31 MSRP: $57.00
You Save: $18.69 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearings; Bearing Connecting Rod Standard
- Replaces: 4429175, 4429175AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2010 Dodge Ram 2500 | Base, Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 2500 Rod Bearings Part Number: 2421305
$17.58 MSRP: $22.29
You Save: $4.71 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Package - Connecting Rod; Engine Connecting Rod Bearing; Connecting Rod Bearing Pair; Rod Bearing; Bearings; Connecting Rod Bearing Package, Standard; Includes various connecting rod bearings.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2003 Dodge Ram 2500 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Connecting Rod Bearing Part Number: 68207790AA
$6.32 MSRP: $7.70
You Save: $1.38 (18%)
ADD TO CART
Product Specifications
- Other Name: Bearing Package - Connecting Rod; Rod Bearing; Bearing; Bearings; Bearing Kit Connecting Rod Standard
- Replaces: 5086003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2007 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Bearings Part Number: 68001946AA
$72.75 MSRP: $109.00
You Save: $36.25 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing Connecting Rod 1.00 Mm U/S
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 2500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 2500 Bearings Part Number: 68001943AA
$108.91 MSRP: $226.00
You Save: $117.09 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing Connecting Rod .25 Mm U/S
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 2500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 2500 Bearings Part Number: 68001945AA
$306.09 MSRP: $462.00
You Save: $155.91 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing Connecting Rod .75 Mm U/S
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 2500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 2500 Bearings Part Number: 68001944AA
$80.61 MSRP: $167.00
You Save: $86.39 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing Connecting Rod .50 Mm U/S
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 2500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL

Dodge Ram 2500 Rod Bearing

Choose OEM Rod Bearing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Rod Bearing follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 2500 Rod Bearing as one of the quality products that can make a huge difference to the Dodge Ram 2500 series vehicles' performance and durability. Its major role is to sustain such crucial parts of the engine as the crankshaft and the camshaft with the help of the Rod Bearing, which also lubricates the rotating parts to create an oil film under pressure for the sake of the engine. Thus, install this precision-engineered part on your light-duty as well as, heavy-duty Dodge Ram 2500, and receive the premier results. This is the case of the Rod Bearing's design, which may incorporate bi-metal or tri-metal construction, thus being equally suitable for both stock and performance engines, maintaining their function in Dodge Ram 2500. Its application includes proper lubrication since it has an ability to locate oil holes and the corresponding passages in the engine block, thus increasing product durability and decreasing wear. For instance, Performance-Oriented Rod Bearings may add features like dry film coatings and oil clearance, which makes the goods unique in the market matrix of automobiles. To this date, the Dodge Ram 2500 is considered to be one of the most reliable and powerful trucks on the road and the Rod Bearing plays a significant part in this by increasing the efficiency and safety of the vehicle. Indeed, the Dodge Ram 2500 has come a long way and today remains one of the most popular and sought-after full-size pickup trucks on the market owing to its high reliability and powerful performace.

Dodge Ram 2500 Rod Bearing Parts and Q&A

Connecting Rod Bearing
68207790AA
Q: How to Maintain and Fix a Rod Bearing on Dodge Ram 2500?
A:
You should measure the connecting rod bore after you remove the bearings and tighten the bolts to 100 Nm (73 ft. lbs.) first. Next, measure the inside of the connecting rod bore, keeping both the bearings and bolts in place and tightened to the right level, checking inside the 20° arc at both sides and remaining 90° from the parting line. Note the lengths of the shortest and the longest diameters. Measuring the diameter of the rod journal at the proper place, you can then determine the average diameter for the journal. To get the minimum bearing clearance, take away the smallest diameter of the rod that fits the bearing and the average journal diameter from both sides of the crankshaft. For best results, measure the gap space between the connecting rod bore with the largest hole and the bearings installed on each crankshaft journal. Should the crankshaft fit within the limits, put in a new bearing; otherwise, grind it and place oversized rod bearings in next-size holes.
Rod Bearings
2421305
Q: What Are the Key Steps for Proper Rod Bearing Installation and Lubrication on Dodge Ram 2500?
A:
Once every rod is fitted to a bank, refrain from alternating, as Pistons and connecting rods do not go between banks. Put markings on the bearing caps when taking them off, since different caps have different fit. A small V-shaped cut is included on each bearing cap parting face; set up the lower bearing shell with the V-groove facing the one provided by the cap to maintain lubrication for the cylinder wall in the other bank. Adjust the bearing shells so that the tangs are inserted into the special grooves in both the rods and caps. No more than 0.025 mm (0.001 inch) should be present as taper or out-of-round on any crankshaft journals. The thickness of bearings is offered in 0.025 mm (0.001 inch), 0.051 mm (0.002 inch), 0.076 mm (0.003 inch), 0.254 mm (0.010 inch) and 0.305 mm (0.012 inch) sizes less than the nominal size. Install each bearing in a pair, do not mix a brand-new bearing with an old half and do not file off material from the bearings or bearings caps.