How to Properly Remove and Replace an Oil Filter in an Engine on Dodge Ram 2500?

All engines are supplied with a new, high-quality, throwaway filter and it is advised to select a Mopar(R) or equal replacement. The first step is to place a drain pan beneath where you're going to remove the filter. Loosen the filter's cap using a suitable oil filter wrench. Upon loosening the filter, take out the oil filter. When the filter comes off its boss in the cylinder block, tilt the gasket end up to stop oil from leaking and then remove it from the car. Again, the gasket should only be left behind if you are installing a new component after the replacement. In the end, go over the gasket sealing surface with a wiping cloth to remove oil and dirt.

How to Install an Oil Filter on Dodge Ram 2500?

Add a bit of oil to the gaskets around the oil filter to help with the installation. Clip the filter onto the tail piece and just tighten it a quarter turn when the gasket touches the rim. Once installation is complete, place oil in the crankcase, look at the level and watch the engine for any leaks during your first start.

OEM Dodge Ram 2500 Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Filters found

View related parts
Dodge Ram 2500 Oil Filter Part Number: 5083285AA
$15.95 MSRP: $23.40
You Save: $7.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Filter Engine Oil See Note; Filter Engine Oil
- Replaces: 68048553AA, 5016547AB, 5016547AC, 68086920AA, 5016547AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2010 Dodge Ram 2500 | Base, Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 2500 Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2007 Dodge Ram 2500 | Base, Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.2L V8, 5.7L V8, 5.9L V8, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
Dodge Ram 2500 Oil Filter Part Number: 4884899AC
$6.87 MSRP: $10.05
You Save: $3.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Filter Engine Oil [22Mm]; Filter Engine Oil
- Replaces: 4884899AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Oil Filter Part Number: 5139947AA
Product Specifications
- Other Name: Lube - Odorant; Filter Change Maintenance Kit; Filter Engine Oil See Note; Filter Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2010 Dodge Ram 2500 | Laramie, SLT, ST, SXT, TRX | 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6

Dodge Ram 2500 Oil Filter

Choose OEM Oil Filter that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oil Filter follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Oil Filter in the Dodge Ram 2500 vehicles is important for the overall performance of the vehicle and its engine since it helps in keeping the oil clean as it filters out impurities. It works in a way that it trap particles of dirt allowing oil to pass through it in order to provide the much needed lubrication and protection from wear and tear and sludge accumulation. The filter used in Dodge Ram 2500 models include the replaceable element cartridge filters and the standard spin-on filter which is housed in a metal case that can endure high oil pressure and engine vibrations. Osiddugfwd Dodge Ram 2500 have used standard and performance type of Oil Filter in the course of production. Performance filters are designed to provide higher standards than standard filters that are used to filter oil in high-performance engines; the former has thicker canister walls and synthetic media to allow for greater flow rates with more filtering capability. The features listed above about Oil Filter are quite helpful in the performance and life of the Dodge Ram 2500 engine.

Dodge Ram 2500 Oil Filter Parts and Q&A

Oil Filter
4884899AC
Q: How to Properly Remove and Replace an Oil Filter in an Engine on Dodge Ram 2500?
A:
All engines are supplied with a new, high-quality, throwaway filter and it is advised to select a Mopar(R) or equal replacement. The first step is to place a drain pan beneath where you're going to remove the filter. Loosen the filter's cap using a suitable oil filter wrench. Upon loosening the filter, take out the oil filter. When the filter comes off its boss in the cylinder block, tilt the gasket end up to stop oil from leaking and then remove it from the car. Again, the gasket should only be left behind if you are installing a new component after the replacement. In the end, go over the gasket sealing surface with a wiping cloth to remove oil and dirt.
Oil Filter
5083285AA
Q: How to Install an Oil Filter on Dodge Ram 2500?
A:
Add a bit of oil to the gaskets around the oil filter to help with the installation. Clip the filter onto the tail piece and just tighten it a quarter turn when the gasket touches the rim. Once installation is complete, place oil in the crankcase, look at the level and watch the engine for any leaks during your first start.