How to remove and install the Fuel Level Sensor in the fuel pump module on Dodge Ram 2500 Van?

On the side of the fuel pump module, located within the fuel tank, is a fuel level sensor and float assembly known as the fuel level sensor. Before removing the unit, you should take out the fuel tank and then the fuel pump module. After unplugging the 4-way electrical connector, release both sensor wires from the connector, making sure the locking collar is out of the way. The sensor is held close to the pump block by a simple lock and a notch; while removing the unit, gently push the lock aside and slide the unit out while keeping track of the wiring. To install, place the sensor into the track, check that all the wires are routed properly and keep pressing until the tab locks into place. Connect the two wires from the sensor into the 4-way connector and after that, fit the locking collar in place. Finally, link the 4-way connector to the computer module. Lastly, put in the fuel pump module and the fuel tank again.

OEM Dodge Ram 2500 Van Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Level Sensors found

View related parts
Dodge Ram 2500 Van Inner Tie Rod Part Number: 5018805AA
Product Specifications
- Other Name: Level Unit - Fuel; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Gauge Sending Unit; Sending Unit; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Ram 2500 Van | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Fuel Gauge Sending Unit Part Number: 5012270AA
Product Specifications
- Other Name: Level Unit - Fuel; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Ram 2500 Van | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Van Fuel Gauge Sending Unit Part Number: 5012269AA
Product Specifications
- Other Name: Level Unit; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Dodge Ram 2500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

Dodge Ram 2500 Van Fuel Level Sensor

Choose OEM Fuel Level Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Level Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 Van matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 Van parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 2500 Van Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
5012269AA
Q: How to remove and install the Fuel Level Sensor in the fuel pump module on Dodge Ram 2500 Van?
A:
On the side of the fuel pump module, located within the fuel tank, is a fuel level sensor and float assembly known as the fuel level sensor. Before removing the unit, you should take out the fuel tank and then the fuel pump module. After unplugging the 4-way electrical connector, release both sensor wires from the connector, making sure the locking collar is out of the way. The sensor is held close to the pump block by a simple lock and a notch; while removing the unit, gently push the lock aside and slide the unit out while keeping track of the wiring. To install, place the sensor into the track, check that all the wires are routed properly and keep pressing until the tab locks into place. Connect the two wires from the sensor into the 4-way connector and after that, fit the locking collar in place. Finally, link the 4-way connector to the computer module. Lastly, put in the fuel pump module and the fuel tank again.