How to Remove the Brake Master Cylinder on Dodge Ram 3500?

Before removing the brake master cylinder, press down on the brake pedal five times so the vacuum in the booster unit is used up. After that, remove the fluid from the reservoir with a siphon and separate the low fluid level electrical connector. To avoid brake fluid damage to your vehicle, put a towel or rag under the master cylinder outlet port. Connect with the master cylinder and remove the brake lines, then let go of the mounting nuts. As you take away the assembly, try not to alter the way the master cylinder faces the front of the booster, as otherwise you could interfere with its rod and disturb its position. In the last step, remove the master cylinder.

How to Install a Brake Master Cylinder on Dodge Ram 3500?

To place the Brake Master Cylinder, apply brake fluid first and put the grommets in using just your fingers, so they don't get damaged. After that, slide reservoir 2 into the grommets 6, then wiggle the reservoir while pushing it down so it seats securely. After that, attach the provided mounting bolt 5 to the master cylinder 4 to secure the reservoir 2 and restore the attachment of the combined electrical connector and fluid reservoir level switch 3. Once adjustments are made, take out the prop rod and flush and bleed the entire base brake system.

OEM Dodge Ram 3500 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Master Cylinders found

View related parts
Dodge Ram 3500 Master Cylinder Part Number: 5011256AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Master Cylinder Part Number: 5093408AA
Product Specifications
- Other Name: Motor Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Brake Reservoir; Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Master Cylinder Part Number: 4778456
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder, Brake; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Master Cylinder Part Number: 5179892AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Master Cylinder Part Number: V1100888AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Master Cylinder Part Number: 5093407AA
Product Specifications
- Other Name: Motor Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 3500 Master Cylinder Part Number: 5017034AA
Product Specifications
- Other Name: Motor Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Master Cylinder Part Number: 5093407AB
Product Specifications
- Other Name: Motor Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Master Cylinder Part Number: 4778450
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder, Brake; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Master Cylinder Part Number: 5080888AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 10 Cyl 8.0 L GAS, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

Dodge Ram 3500 Brake Master Cylinder

Choose OEM Brake Master Cylinder that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Master Cylinder follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Brake master cylinder in Dodge Ram 3500 vehicles is a high priority component of the braking systems for which actuates the hydraulic pressure from the foot pedal of the driver. This hydraulic pressure is transmitted to the slave cylinders and makes the brake mechanism squeeze the brake linings together and make the friction required to stop the vehicle. Normally, the Dodge Ram 3500 brakes use the dual circuit master cylinder that means that if one of the circuits becomes a problem, the other circuit should be able to offer the required level of braking. Dodge Ram 3500 Brake Master Cylinders can be of different design and can be produced with cast iron or aluminum housing and with the built-in or external fluid tank. The internal reservoirs contain only one cap and the external ones may contain either one or two threaded caps. In the long run, there may develop such complications as a leakage or internal failures and therefore must be checked and serviced well.

Dodge Ram 3500 Brake Master Cylinder Parts and Q&A

Master Cylinder
5093408AA
Q: How to Remove the Brake Master Cylinder on Dodge Ram 3500?
A:
Before removing the brake master cylinder, press down on the brake pedal five times so the vacuum in the booster unit is used up. After that, remove the fluid from the reservoir with a siphon and separate the low fluid level electrical connector. To avoid brake fluid damage to your vehicle, put a towel or rag under the master cylinder outlet port. Connect with the master cylinder and remove the Brake Lines, then let go of the mounting nuts. As you take away the assembly, try not to alter the way the master cylinder faces the front of the booster, as otherwise you could interfere with its rod and disturb its position. In the last step, remove the master cylinder.
Master Cylinder
5179892AA
Q: How to Install a Brake Master Cylinder on Dodge Ram 3500?
A:
To place the Brake Master Cylinder, apply brake fluid first and put the grommets in using just your fingers, so they don't get damaged. After that, slide reservoir 2 into the grommets 6, then wiggle the reservoir while pushing it down so it seats securely. After that, attach the provided mounting bolt 5 to the master cylinder 4 to secure the reservoir 2 and restore the attachment of the combined electrical connector and fluid reservoir level switch 3. Once adjustments are made, take out the prop rod and flush and bleed the entire base brake system.