How to Install a Coolant Reservoir for a 3.7L/4.7L/5.7L Engine on Dodge Ram 3500?

Insert the mounting pins from the coolant reservoir into the openings on the fan shroud and then push the coolant reservoir down on top. Using the screws provided, hold the container smoothingly against the fan shroud. Tighten the screws to 8.5 Nm (75 in. lbs). Make sure the locks on the mounting pins have been set before using the scope. After that, connect the recovery hose to the radiator and link the washer pump's electrical connector.

How to Service a Coolant Reservoir for 3.7L, 4.7L, or 5.7L Engines on Dodge Ram 3500?

For all 3.7L, 4.7L or 5.7L engines, start by unplugging the electrical wiring from the washer pump. After disconnecting the recovery hose from the radiator, take off the coolant container by loosening its bolts that hold it to the fan shroud. Bring the container in the direction toward the engine and tilt it backward to unlock the mounting pins, then lift it off the fan shroud. When you install the Water Flow Starter, place the container mounting pins in the slots of the fan shroud and firmly set the container onto the fan. Connect the container by screwing on the bolts to a torque of 8.5 Nm (75 inch lbs.). After that, add the recovery hose back to the radiator and plug the washer pump cable into its electrical outlet.

OEM Dodge Ram 3500 Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Coolant Reservoirs found

View related parts
Dodge Ram 3500 Expansion Tank Part Number: 55057130AD
$108.59 MSRP: $162.00
You Save: $53.41 (33%)
ADD TO CART
Product Specifications
- Other Name: Bottle - Coolant Recovery; Engine Coolant Reservoir; Reservoir Tank; Bottle Coolant Recovery; Coolant Reservoir
- Replaces: 55057130AB, 55057130AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Washer Reservoir Part Number: 55277374AA
Product Specifications
- Other Name: Reservoir - Washer And Coolant; Washer Fluid Reservoir; Windshield Washer Reservoir; Bottle Coolant Recovery And Washer Fluid; Reservoir Washer And Coolant
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Reservoir Tank Part Number: 52027778
Product Specifications
- Other Name: Bottle - Coolant Reserve; Engine Coolant Reservoir; Recovery Tank; Coolant Reserve Tank, Except 8.0L Engine.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2002 Dodge Ram 3500 | Base | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Reservoir Tank Part Number: 52028930AE
Product Specifications
- Other Name: Bottle - Coolant Recovery; Engine Coolant Reservoir; Bottle Coolant Recovery; Coolant Reservoir
- Replaces: 52028930AD, 52028930AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 3500 | Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 5.9L L6, 6 Cyl 5.9 L DIESEL, 8.0L V10
View related parts
Dodge Ram 3500 Reservoir Tank Part Number: 55056493AB
Product Specifications
- Other Name: Bottle - Coolant Recovery; Engine Coolant Reservoir; Washer Fluid Reservoir; Reservoir Washer And Coolant; Bottle Coolant Recovery; Coolant Reservoir
- Replaces: 55056493AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Reservoir Tank Part Number: 5072595AA
Product Specifications
- Other Name: Bottle - Coolant Reserve; Engine Coolant Reservoir; Tank Coolant Reserve; Coolant Reservoir
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Ram 3500 | Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Reserve Tank Part Number: 52028624
Product Specifications
- Other Name: Tank Coolant Reserve; Coolant Reservoir
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS
View related parts
Dodge Ram 3500 Reservoir Tank Part Number: 5072602AB
Product Specifications
- Other Name: Bottle - Degasser; Engine Coolant Reservoir; Coolant Reservoir
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 3500 | Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Reservoir Tank Part Number: 55056502AC
Product Specifications
- Other Name: Bottle - Coolant Reserve & Washer Flat; Engine Coolant Reservoir; Coolant Reservoir
- Replaces: 55056502AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Ram 3500 | Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Reservoir Tank Part Number: 55056502AE
Product Specifications
- Other Name: Reservoir - Washer And Coolant; Engine Coolant Reservoir; Washer Fluid Reservoir; Windshield Washer Reservoir; Washer Reservoir; Bottle Coolant Recovery And Washer Fluid; Reservoir Washer And Coolant; Coolant Reservoir
- Replaces: 55056502AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 5.7L V8, 8 Cyl 5.7 L GAS

Dodge Ram 3500 Coolant Reservoir

Choose OEM Coolant Reservoir that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Coolant Reservoir follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Coolant Reservoir which is also called a coolant recovery tank or an expansion tank is an essential component of the Dodge Ram 3500 vehicles' engine cooling systems. Its main responsibility is to control the coolant fluid in the system in order to avoid formation of air bubbles within the same. It does contain some amount of coolant, however its main function is to store air to expand the coolant when hot, as it is an incompressible fluid. Dodge Ram 3500 vehicles utilize two types of Coolant Reservoirs: high pressure and low pressure, These classifications where also made based on the types of compressed air used such as, A plastic cap on the top of the reservoir means you have a non-pressurized reservoir while a metal cap with pressure rating mean you have a pressurized type. It is important to know about these differences in order to maintain the Dodge Ram 3500's cooling system.

Dodge Ram 3500 Coolant Reservoir Parts and Q&A

Reservoir Tank
55056493AB
Q: How to Install a Coolant Reservoir for a 3.7L/4.7L/5.7L Engine on Dodge Ram 3500?
A:
Insert the mounting pins from the coolant reservoir into the openings on the fan shroud and then push the coolant reservoir down on top. Using the screws provided, hold the container smoothingly against the fan shroud. Tighten the screws to 8.5 Nm (75 in. lbs). Make sure the locks on the mounting pins have been set before using the scope. After that, connect the recovery hose to the Radiator and link the washer pump's electrical connector.
Reservoir Tank
55056502AE
Q: How to Service a Coolant Reservoir for 3.7L, 4.7L, or 5.7L Engines on Dodge Ram 3500?
A:
For all 3.7L, 4.7L or 5.7L engines, start by unplugging the electrical wiring from the washer pump. After disconnecting the recovery hose from the Radiator, take off the coolant container by loosening its bolts that hold it to the fan shroud. Bring the container in the direction toward the engine and tilt it backward to unlock the mounting pins, then lift it off the fan shroud. When you install the Water Flow Starter, place the container mounting pins in the slots of the fan shroud and firmly set the container onto the fan. Connect the container by screwing on the bolts to a torque of 8.5 Nm (75 inch lbs.). After that, add the recovery hose back to the radiator and plug the washer pump cable into its electrical outlet.