How to Remove the MAP Sensor from the Intake Manifold Air Plenum Box on Dodge Ram 3500?

Disconnect the connector at the Manifold Absolute Pressure (MAP) sensor, move the release lock out and press the lock to pull it out and remove the sensor at the front of the intake manifold air plenum box. After that, twist the lens housing 1/4 hour counterclockwise to remove the sensor. During this process, you should also assess the O-ring on the sensor.

How to Install a MAP Sensor in the Intake Manifold on Dodge Ram 3500?

The Manifold Absolute Pressure sensor is positioned on the front of the intake manifold air plenum box. Clearly clean out the port for the MAP sensor on your intake manifold to start. After that, look for damage such as cuts or tears on the MAP sensor O-ring seal. Insert the sensor into the manifold and clockwise 1/4 turn to set it in place. Connect the electrical connector in the last step.

OEM Dodge Ram 3500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 MAP Sensors found

View related parts
Dodge Ram 3500 M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2007 Dodge Ram 3500 | Laramie, SLT, ST, Sport | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Map Sensor Part Number: 68430063AA
$148.30 MSRP: $226.00
You Save: $77.70 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Temperature Barometric Abso; Barometric Sensor
- Replaces: 53034235AA, 53032649AA, 68050010AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 3500 M.A.P. Sensor Part Number: 56026770
$118.97 MSRP: $177.00
You Save: $58.03 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - M.A.P.; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Single Board Engine Control, Sensor, M.A.P. (Use Insulator 4504260) 1990; Bracket 56027080.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 3500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 M.A.P. Sensor Part Number: 56028562AB
$31.84 MSRP: $45.80
You Save: $13.96 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 3500 | Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 M.A.P. Sensor Part Number: 68430060AA
$174.88 MSRP: $341.00
You Save: $166.12 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map
- Replaces: 4896131AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Ram 3500 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
View related parts
Dodge Ram 3500 Sensor - Intake Manifold Part Number: 68282012AB
$321.77 MSRP: $476.00
You Save: $154.23 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR-INTAKE MANIFOLD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Map Sensor Part Number: 4896131AC
$231.13 MSRP: $341.00
You Save: $109.87 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Sensor Map; Pressure Sensor
- Replaced by: 68430060AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Ram 3500 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
View related parts
Dodge Ram 3500 M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2002 Dodge Ram 3500 | Base | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 M.A.P. Sensor Part Number: 4606130
Product Specifications
- Other Name: Sensor Packkage - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Sensor, M.A.P.; Sensor Map
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS

Dodge Ram 3500 MAP Sensor

Choose OEM MAP Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each MAP Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The MAP Sensor in Dodge Ram 3500, is an important sensor needed for measuring the positive air pressure that is drawn by the intake manifold. This small, plastic instrument sends signals to the engine control unit (ECU) where it is able to alter fuel injectors based on the amount of air in the cylinder. As a result, the MAP Sensor is useful in helping to regulate the manifold pressure so as to allow for an ideal air-fuel mixture for combustion. There are many types of MAP sensors that can be fitted on Dodge Ram 3500 especially those vehicles with naturally aspirated and those that are forced induction. Although naturally aspirated engines may use only MAP sensor or mass airflow (MAF) sensor, the forced induction engines use both to improve the performance of the engine. Another benefit of the MAP Sensor's capacity to track absolute pressure over boost sensors that measure pressure above a determine value can contribute to precise fuel delivery as well as engine function in Dodge Ram 3500 cars.

Dodge Ram 3500 MAP Sensor Parts and Q&A

M.A.P. Sensor
68199324AB
Q: How to Remove the MAP Sensor from the Intake Manifold Air Plenum Box on Dodge Ram 3500?
A:
Disconnect the connector at the Manifold Absolute Pressure (MAP) sensor, move the release lock out and press the lock to pull it out and remove the sensor at the front of the intake manifold air plenum box. After that, twist the lens housing 1/4 hour counterclockwise to remove the sensor. During this process, you should also assess the O-ring on the sensor.
Sensor - Intake Manifold
68282012AB
Q: How to Install a MAP Sensor in the Intake Manifold on Dodge Ram 3500?
A:
The Manifold Absolute Pressure sensor is positioned on the front of the Intake Manifold air plenum box. Clearly clean out the port for the MAP sensor on your intake manifold to start. After that, look for damage such as cuts or tears on the MAP sensor O-ring seal. Insert the sensor into the manifold and clockwise 1/4 turn to set it in place. Connect the electrical connector in the last step.