How to Service and Repair a Steering Knuckle in a Link/Coil Front Suspension on Dodge Ram 3500?

Begin servicing the steering knuckle in a link/coil front suspension by excluding the hub bearing first and next, removing the link or tie-rod from the steering knuckle arm. After that, remove the wire and bracket for the ABS sensor from the knuckle. First, get rid of the cotter pin from the upper ball stud nut, then remove both upper and lower ball stud nuts. Hit the steering knuckle with a brass hammer and slightly loosen it, then get rid of the knuckle from the axle tube yokes. Align the steering knuckle on the ball studs and fit the lower ball stud nut, remembering to tighten it to 47 Nm (35 ft. lbs.) torque before you use the cotter pin. After that, put in the ball stud nut from above, tighten it to 94 Nm (70 ft. lbs.), advance it past the next hole and insert a new cotter pin. Turn the lower ball stud nut to a torque of 190 - 217 Nm (140 - 160 ft. lbs.) while spinning the nut into a new hole and adding a new cotter pin. After that, put in the hub bearing, fasten the tie-rod or drag link end onto the steering knuckle arm and secure the ABS sensor wire and bracket to the knuckle.

How to Install and Secure Ball Studs on a Steering Knuckle on Dodge Ram 3500?

Direct the steering knuckle onto the ball studs and then fasten and tighten the lower ball stud nut to 47 Nm (35 ft. lbs.). Also install the upper ball stud nut and tighten it to 94 Nm (70 ft. lbs.) torque, then re-torque the lower ball stud nut at 190-217 Nm (140-160 ft. lbs.). After setting the ball studs in place, add the hub bearing, then fasten the tie-rod or drag link end to the steering knuckle arm and end by attaching the wheel speed sensor.

OEM Dodge Ram 3500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Steering Knuckles found

View related parts
Dodge Ram 3500 Knuckle, Front Passenger Side Part Number: 5086678AA
$398.90 MSRP: $896.00
You Save: $497.10 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Driver Side Part Number: 68054495AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Driver Side Part Number: 5086679AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Part Number: 68065447AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front; Knuckle Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Knuckle, Front Part Number: 68065446AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front; Knuckle Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Knuckle, Front Passenger Side Part Number: 68054494AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Passenger Side Part Number: 5015238AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Part Number: 52037683
Product Specifications
- Other Name: Knuckle Front; Knuckle, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Driver Side Part Number: 5015239AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Part Number: 4897441AA
Product Specifications
- Other Name: Knuckle Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Part Number: 4897440AA
Product Specifications
- Other Name: Knuckle Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Passenger Side Part Number: 68032004AF
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right, Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 68032004AC, 68032004AA, 68032004AB, 68032004AD, 68032004AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 5.7L V8, 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Driver Side Part Number: 68032003AF
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left, Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 68032003AC, 68032003AD, 68032003AE, 68032003AB, 68032003AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 5.7L V8, 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Shackle Bracket, Front Passenger Side Part Number: 52038658
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle; Knuckle Front
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2001 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Knuckle, Front Passenger Side Part Number: 52106790AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right
- Position: Front Passenger Side
- Replaces: 52106790AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2008 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
Dodge Ram 3500 Knuckle, Front Driver Side Part Number: 52106791AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left
- Position: Front Driver Side
- Replaces: 52106791AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2008 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10

Dodge Ram 3500 Steering Knuckle

Choose OEM Steering Knuckle that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Steering Knuckle follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Steering Knuckle of Dodge Ram 3500 vehicles is an assembly that is essential in linking the suspension and the steering mechanisms to the front wheels, which are capable of performing the vertical and horizontal movements, in relation to the type of road and the needed steering. Depending on the specifics of the car model, the Knuckle can contain an integral spindle, or a hub with the roller bearing taper for the rear wheel drive cars while the front wheel / all-wheel / four-wheel drive contain a drive axle passing through the Knuckle to a hub. Steering Knuckles have transitioned from simple kingpins to complex designs For achieving wheel stability and control, looking at the long endurance part of the automobile in which alteration is only made if there is damage. It's recommended that bores connecting Knuckle stud's, spindles, and bushing should often be inspected inshfor the optimal performance as well as safety.

Dodge Ram 3500 Steering Knuckle Parts and Q&A

Knuckle, Front Passenger Side
5086678AA
Q: How to Service and Repair a Steering Knuckle in a Link/Coil Front Suspension on Dodge Ram 3500?
A:
Begin servicing the steering knuckle in a link/coil front suspension by excluding the hub bearing first and next, removing the link or tie-rod from the steering knuckle arm. After that, remove the wire and bracket for the ABS sensor from the knuckle. First, get rid of the cotter pin from the upper ball stud nut, then remove both upper and lower ball stud nuts. Hit the steering knuckle with a brass hammer and slightly loosen it, then get rid of the knuckle from the axle tube yokes. Align the steering knuckle on the ball studs and fit the lower ball stud nut, remembering to tighten it to 47 Nm (35 ft. lbs.) torque before you use the cotter pin. After that, put in the ball stud nut from above, tighten it to 94 Nm (70 ft. lbs.), advance it past the next hole and insert a new cotter pin. Turn the lower ball stud nut to a torque of 190 - 217 Nm (140 - 160 ft. lbs.) while spinning the nut into a new hole and adding a new cotter pin. After that, put in the hub bearing, fasten the tie-rod or drag link end onto the steering knuckle arm and secure the ABS sensor wire and bracket to the knuckle.
Knuckle, Front Driver Side
5086679AA
Q: How to Install and Secure Ball Studs on a Steering Knuckle on Dodge Ram 3500?
A:
Direct the steering knuckle onto the ball studs and then fasten and tighten the lower ball stud nut to 47 Nm (35 ft. lbs.). Also install the upper ball stud nut and tighten it to 94 Nm (70 ft. lbs.) torque, then re-torque the lower ball stud nut at 190-217 Nm (140-160 ft. lbs.). After setting the ball studs in place, add the hub bearing, then fasten the tie-rod or drag link end to the steering knuckle arm and end by attaching the wheel speed sensor.