How to Remove the Front Suspension Upper Ball Joint on Dodge Ram 3500?

Raise and support your car, take off the wheel and tire and then proceed to remove the front upper ball joint. Following that, remove the upper ball joint retaining nut and separate the ball joint from the knuckle using Ball Joint Remover 9360. Remove the wire from the wheel speed sensor on the knuckle and slide the knuckle away to see the ball joint. Taking out the ball joint boot and putting in a block of wood between the control arm and frame bracket, if necessary, creates the space needed for you to use the press tool. Use different lubricants on the threads of the tool to make sure it will work properly while being removed or installed and that it lasts a long time. Using Ball Joint Press C-4212F, Ball Joint Remover 9770-1 and Ball Joint Remover 9770-2, carefully press on the ball joint from the upper control arm at the last step.

How to Install a Ball Joint in the Front Suspension on Dodge Ram 3500?

To extend the life of the tool and avoid issues while using it, first cover every thread on it with heavy lubrication before you use it. Press in the ball joint (3) into the control arm (4) with the help of special tools C-4212F (press), 9776-1 (driver) and 8698-3 (receiver). After that, add a new snap ring (3). Set up the steering knuckle now and then put the tie rod end into the knuckle. After that, connect the caliper and rotor to the brake and after that connect the tire and wheel assembly. Once all the screws are in place, look at the vehicle's ride height and complete a wheel alignment before moving on.

OEM Dodge Ram 3500 Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Ball Joints found

View related parts
Dodge Ram 3500 Lower Ball Joint, Front Part Number: 5170824AD
$171.08 MSRP: $257.00
You Save: $85.92 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balljoint - Lower Control Arm; Suspension Ball Joint, Front Lower; Ball Joint Kit Lower Control Arm includes Ball Joint, Snap Ring, and Nut.
- Position: Front Lower
- Replaces: 5170824AB, 5170824AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 3500
- 2006-2007 Dodge Ram 3500 | 5.7L V8, 5.9L L6, 6.7L L6
View related parts
Dodge Ram 3500 Ball Joints, Front Lower Part Number: 5086674AC
$103.28 MSRP: $229.00
You Save: $125.72 (55%)
ADD TO CART
Product Specifications
- Other Name: Balljoint - Lower; Suspension Ball Joint, Front Lower; Suspension Ball Joint; Ball Joint; Lower Ball Joint
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Ball Joints, Front Upper Part Number: 68214646AA
$88.03 MSRP: $124.00
You Save: $35.97 (30%)
ADD TO CART
Product Specifications
- Other Name: Balljoint - Upper; Suspension Ball Joint, Front Upper; Telescopic Ball Joint; Upper Ball Joint; Upper Ball Joints; Ball Joint Kit Upper; Suspension Ball Joint; Ball Joint
- Position: Front Upper
- Replaces: 5086672AB, 5086672AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
Dodge Ram 3500 Upper Ball Joint, Front Part Number: 5174041AC
$63.71 MSRP: $140.00
You Save: $76.29 (55%)
ADD TO CART
Product Specifications
- Other Name: Balljoint - Upper Control Arm; Suspension Ball Joint, Front Upper; Suspension Ball Joint; Ball Joint; Upper Ball Joints
- Position: Front Upper
- Replaces: 5174041AA, 5174041AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Lower Ball Joint, Front Part Number: 5086980AD
$69.22 MSRP: $154.00
You Save: $84.78 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balljoint - Lower Control Arm; Suspension Ball Joint, Front Lower; Suspension Ball Joint; Ball Joint
- Position: Front Lower
- Replaces: 5086980AA, 5086980AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 3500 | Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
Dodge Ram 3500 Ball Joint, Lower Part Number: 52037661
$111.97 MSRP: $141.95
You Save: $29.98 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balljoint - Lower Control Arm; Suspension Ball Joint; Lower Ball Joint; Ball Joint Lower Control Arm; Ball Joint, Lower
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Ball Joint, Upper Part Number: 52037674
Product Specifications
- Other Name: Balljoint - Upper Control Arm; Suspension Ball Joint; Upper Ball Joints; Ball Joint, Upper Control Arm; Ball Joint Upper Control Arm
- Position: Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Ball Joint, Front Part Number: 5015114AA
Product Specifications
- Other Name: Balljoint - Front Knuckle; Suspension Ball Joint; Telescopic Ball Joint; Ball Joints; Joint; Ball Joint Front Knuckle
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Lower Ball Joint Part Number: 5086980AC
Product Specifications
- Other Name: Balljoint - Lower Control Arm; Suspension Ball Joint; Ball Joint
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Lower Ball Joint, Front Part Number: 5170824AC
Product Specifications
- Other Name: Balljoint - Lower Control Arm; Suspension Ball Joint, Front Lower; Ball Joint Package Lower Control Arm; Suspension Ball Joint; Ball Joint
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Ball Joints Part Number: 4746696AB
Product Specifications
- Other Name: Balljoint - Knuckle; Suspension Ball Joint; Telescopic Ball Joint; Ball Joint; Joint
- Replaces: 4746696
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2000 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Ball Joint Part Number: 4897594AB
Product Specifications
- Other Name: Balljoint - Knuckle; Suspension Ball Joint; Ball Joints; Joint
- Replaces: 4897594AA, 4897594AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS, 8.0L V10

Dodge Ram 3500 Ball Joint

Choose OEM Ball Joint that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ball Joint follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Specifically, the Dodge Ram 3500 vehicles' Ball Joint is an element of the suspension and steering systems that joins the control arms to the steering knuckles. Such ball joints enable rotation in two directions but not the translation offering better control of the car's handling, stability, and smoothness of the ride. Generally fabricated from steel, a Dodge Ram 3500 Ball Joint is a bearing-stud-screw attachment finally housed in an enclosed rubber boot to reduce dirt entrance and let lubricant circulation. Currently, the ball joints are widely used instead of the kingpin in the front suspension of many modern cars giving the possibility to adjust the caster and camber accurately without creating the trouble of compliance. This action not only improves vehicle handling, but also may contribute positively to tire wear by preserving or increasing the contact area between the tire and the road surface.

Dodge Ram 3500 Ball Joint Parts and Q&A

Ball Joints, Front Upper
68214646AA
Q: How to Remove the Front Suspension Upper Ball Joint on Dodge Ram 3500?
A:
Raise and support your car, take off the wheel and tire and then proceed to remove the front upper ball joint. Following that, remove the upper ball joint retaining nut and separate the ball joint from the knuckle using Ball Joint Remover 9360. Remove the wire from the wheel speed sensor on the knuckle and slide the knuckle away to see the ball joint. Taking out the ball joint boot and putting in a block of wood between the Control Arm and frame bracket, if necessary, creates the space needed for you to use the press tool. Use different lubricants on the threads of the tool to make sure it will work properly while being removed or installed and that it lasts a long time. Using Ball Joint Press C-4212F, Ball Joint Remover 9770-1 and Ball Joint Remover 9770-2, carefully press on the ball joint from the upper control arm at the last step.
Ball Joints, Front Lower
5086674AC
Q: How to Install a Ball Joint in the Front Suspension on Dodge Ram 3500?
A:
To extend the life of the tool and avoid issues while using it, first cover every thread on it with heavy lubrication before you use it. Press in the ball joint (3) into the Control Arm (4) with the help of special tools C-4212F (press), 9776-1 (driver) and 8698-3 (receiver). After that, add a new snap ring (3). Set up the Steering Knuckle now and then put the Tie Rod End into the knuckle. After that, connect the caliper and rotor to the brake and after that connect the tire and wheel assembly. Once all the screws are in place, look at the vehicle's ride height and complete a wheel alignment before moving on.