How to remove and install the fuel level sensor in the fuel pump module on Dodge Ram 3500 Van?

On the side of the fuel pump module which is in the fuel tank, we find the fuel level sensor, as well as the float assembly. Before removing the sensor, take the fuel tank and the fuel pump module out. Remove the 4-way electrical plug and cut off both sending unit wires at the connector so the locking collar falls out. You secure the sending unit to the pump module using a small lock tab and notch. To remove it, slide the sending unit down on the tracks while gently pushing the lock tab aside, always paying attention to how the sending unit's wires are routed. To install the sending unit, put it into the tracks with the wires pushed into place, then press down until you hear the lock click. Link the two sending unit wires to the 4-way connector and attach the locking collar and finally connect the 4-way electrical connector to the module. The final step is to replace the fuel pump module and the fuel tank.

OEM Dodge Ram 3500 Van Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Level Sensors found

View related parts
Dodge Ram 3500 Van Inner Tie Rod Part Number: 5018805AA
Product Specifications
- Other Name: Level Unit - Fuel; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Gauge Sending Unit; Sending Unit; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Ram 3500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Van Fuel Gauge Sending Unit Part Number: 5012270AA
Product Specifications
- Other Name: Level Unit - Fuel; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Ram 3500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Van Fuel Gauge Sending Unit Part Number: 5012269AA
Product Specifications
- Other Name: Level Unit; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Dodge Ram 3500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

Dodge Ram 3500 Van Fuel Level Sensor

Choose OEM Fuel Level Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Level Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 Van matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 Van parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 3500 Van Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
5012269AA
Q: How to remove and install the fuel level sensor in the fuel pump module on Dodge Ram 3500 Van?
A:
On the side of the fuel pump module which is in the fuel tank, we find the fuel level sensor, as well as the float assembly. Before removing the sensor, take the fuel tank and the fuel pump module out. Remove the 4-way electrical plug and cut off both sending unit wires at the connector so the locking collar falls out. You secure the sending unit to the pump module using a small lock tab and notch. To remove it, slide the sending unit down on the tracks while gently pushing the lock tab aside, always paying attention to how the sending unit's wires are routed. To install the sending unit, put it into the tracks with the wires pushed into place, then press down until you hear the lock click. Link the two sending unit wires to the 4-way connector and attach the locking collar and finally connect the 4-way electrical connector to the module. The final step is to replace the fuel pump module and the fuel tank.