How to Install a Front Bumper on Dodge Sprinter 2500?

Install the fog lamps with part numbers 12 and 13 using the screws with part number 11, before you fit the front bumper. Coming up next, fit the sensors with part numbers 10, 9, 8, 6, 5 and 4, so the retaining lugs are properly seated. Join the Parktronic wiring harness (part number 7) to the location on the bumper indicated by the pictures and fully click in the connectors clip (part number 14). First, install the air grille labeled 1 and fully seat it, then cover it with the lower grille panel with part number 2. Put the step platform on the back of your car with the bumper and then secure its front so that it lies flat on the bumper. After that, attach part number 7 onto the vehicle as the front bumper and insert the Parktronic System electrical connector with part number 9 and each of the electrical connectors with part number 8 into the front fog lamps on both sides. Add the outside temperature indicator temperature sensor with part number 10 to your bumper. Secure the front bumper in place and fit and tighten bolts with part numbers 4 and 5, setting bolt 4 to 25 Nm (18 ft. lbs.) and bolt 5 to 20 Nm (15 ft. lbs.). Last, add part number 1 to connect the grille and grille cover and then place the license plate bracket.

How to Remove a Front Bumper on Dodge Sprinter 2500?

Before removing the front bumper, remove the grille, cover, license plate bracket and bolts in that order. Pull the bumper a little toward the front, then disconnect the outside temperature indicator temperature sensor. Take out the Parktronic System connector and separate the connector on each front fog lamp before removing the bumper. To disassemble, press the bumper platform at the step down and then take the rear hook off, then remove the front covering and air grille. Push the catch on the central connector, then pull the Parktronic wiring harness from the bumper. Front Parktronic sensors should have their retaining lugs released and removed before the screws that keep the fog lamps in place are removed.

OEM Dodge Sprinter 2500 Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Bumpers found

View related parts
Dodge Sprinter 2500 Bumper Cover, White, Front Part Number: 1KR89P01AB
$127.80 MSRP: $733.00
You Save: $605.20 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 1GY41P01AA, 1KR89P01AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, White, Front Part Number: 1GY39P01AB
$129.20 MSRP: $741.00
You Save: $611.80 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 1GY39P01AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Rear Part Number: 1HA78XDVAB
$139.90 MSRP: $254.00
You Save: $114.10 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: 1HA78XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, White, Front Part Number: 1VB09P01AA
$278.90 MSRP: $457.00
You Save: $178.10 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Step Bumper, Rear Part Number: 5104135AA
$684.06 MSRP: $966.00
You Save: $281.94 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper - Step; Bumper Step Pad, Rear; Bumper Step
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Step Bumper, Rear Part Number: 5120038AA
$344.50 MSRP: $443.00
You Save: $98.50 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper - Step; Bumper Step Pad, Rear; Bumper Step
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Step Bumper, Rear Part Number: 5120040AA
Product Specifications
- Other Name: Bumper - Step; Bumper Step Pad, Rear; Bumper Step
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Rear Part Number: 5104526AA
Product Specifications
- Other Name: Bumper - Fascia; Bumper Cover, Rear; Bumper Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Front Part Number: 5132494AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Rear Part Number: 5104512AA
Product Specifications
- Other Name: Bumper - Fascia; Bumper Cover, Rear; Bumper Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Step Bumper, Rear Part Number: 5129550AA
Product Specifications
- Other Name: Bumper - Step; Bumper Step Pad, Rear; Bumper Step
- Position: Rear
- Replaces: 5104133AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Dodge Sprinter 2500 | Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Front Part Number: 1VB09XDVAA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Front Part Number: 5104517AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Front Part Number: 5104513AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Front Part Number: 1GY40XDVAA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, White, Front Part Number: 1GY40P01AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Side Cover, Gray, Rear Passenger Side Part Number: 1HA84XDVAA
Product Specifications
- Other Name: Fascia - Rear; Bumper Corner Cover, Rear Right; Fascia Rear
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Side Cover, Gray, Rear Driver Side Part Number: 1HA82XDVAA
Product Specifications
- Other Name: Fascia - Rear; Bumper Corner Cover, Rear Left; Fascia Rear
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Side Cover, White, Rear Passenger Side Part Number: 1HA84P01AA
Product Specifications
- Other Name: Fascia - Rear; Bumper Corner Cover, Rear Right; Fascia Rear
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Side Cover, White, Rear Driver Side Part Number: 1HA82P01AA
Product Specifications
- Other Name: Fascia - Rear; Bumper Corner Cover, Rear Left; Fascia Rear
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

Dodge Sprinter 2500 Bumper

Choose OEM Bumper that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Bumper follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Sprinter 2500 Bumper illustrates both reliability and performance through its design to distribute crash impact energy in low-speed accidents thus protecting essential safety features and the vehicle body. The Dodge bumper originally started with standard metal frames before developers created new reinforcement bars merged with plastic covers which boosted both safety and endurance capabilities. This bumper works with multiple Dodge Sprinter 2500 models while following all necessary regulations alongside successful integration of vehicle style without any compromise in safety measures. This Dodge Sprinter 2500 Bumper consists of aluminum together with carbon steel and stainless steel materials which offer three distinct advantages related to weight, strength and protection against corrosion. The Sprinter 2500's versatility enhances both its operational efficiency and safety performance which drives businesses together with private users to choose this model. The Dodge Sprinter 2500 Bumper receives recognition within the automotive sector because it combines the reputable the brand brand quality with a dependable design. The the automaker model Bumper represents a vital capability that improves driving performance and delivers protective features hence becoming a sought-after component for drivers needing both efficiency and style.

Dodge Sprinter 2500 Bumper Parts and Q&A

Bumper Cover, White, Front
1GY39P01AB
Q: How to Install a Front Bumper on Dodge Sprinter 2500?
A:
Install the fog lamps with part numbers 12 and 13 using the screws with part number 11, before you fit the front bumper. Coming up next, fit the sensors with part numbers 10, 9, 8, 6, 5 and 4, so the retaining lugs are properly seated. Join the Parktronic wiring harness (part number 7) to the location on the bumper indicated by the pictures and fully click in the connectors clip (part number 14). First, install the air Grille labeled 1 and fully seat it, then cover it with the lower grille panel with part number 2. Put the step platform on the back of your car with the bumper and then secure its front so that it lies flat on the bumper. After that, attach part number 7 onto the vehicle as the front bumper and insert the Parktronic System electrical connector with part number 9 and each of the electrical connectors with part number 8 into the front fog lamps on both sides. Add the outside temperature indicator temperature sensor with part number 10 to your bumper. Secure the front bumper in place and fit and tighten bolts with part numbers 4 and 5, setting bolt 4 to 25 Nm (18 ft. lbs.) and bolt 5 to 20 Nm (15 ft. lbs.). Last, add part number 1 to connect the grille and grille cover and then place the license plate bracket.
Bumper Cover, White, Front
1VB09P01AA
Q: How to Remove a Front Bumper on Dodge Sprinter 2500?
A:
Before removing the front bumper, remove the Grille, cover, license plate bracket and bolts in that order. Pull the bumper a little toward the front, then disconnect the outside temperature indicator temperature sensor. Take out the Parktronic System connector and separate the connector on each front fog lamp before removing the bumper. To disassemble, press the bumper platform at the step down and then take the rear hook off, then remove the front covering and air grille. Push the catch on the central connector, then pull the Parktronic wiring harness from the bumper. Front Parktronic sensors should have their retaining lugs released and removed before the screws that keep the fog lamps in place are removed.