How to install a rear Bumper Cover on Dodge Sprinter 2500?

Start by installing the Parktronic sensors 6, 7, 8 and 9. Make sure their retaining tabs reliably seat in the bumper cover. Afterward, connect the Parktronic wiring harness 4 to the bumper 1. Attach the upper sections 3 of the bumper corner to the bumper corners 2 and connect the bumper corners 2 to the bumper 1. Position the bumper 1 with bumper corners 2 on the vehicle and fasten the bumper 1 at collar bolts 3 to 9 Nm (80 in. lbs.). Join the wiring harness of the Parktronic sensor 9 electrical connector, and fit a new cable strap 7. Install the clips 9 at the lowest section of the bumper 1 and secure the bumper corner upper sections 6 on both sides, ensuring that they are fully seated. Affix mounting clips 5 to bumper corners 2. Connect the marker lamp electrical connector to protective strips 4, and install protective strips 4, ensuring clips are fully seated. Lastly, fix the protection strip screws on the wheel wells.

How to remove the rear Bumper Cover on Dodge Sprinter 2500?

To remove the rear bumper cover, start by taking out the screw from the wheel well. Use a trim stick C-4755 or equivalent to separate the clips and protective strips on both the left and right sides. Disconnect the marker lamp electrical connector and remove the clips from the bumper corners. Loosen the upper sections of the bumper corners on both sides using the trim stick. Remove the clips at the bottom of the bumper and separate the cable strap. Disconnect the Parktronic sensor electrical connector, then open the rear doors and remove the collar bolts. Finally, take off the bumper along with the bumper corners. For disassembly, first remove the bumper, then detach the bumper corners from the bumper. Next, take off the upper sections from the bumper corners, separate the Parktronic wiring harness from the bumper, and release the retaining tabs from the rear Parktronic sensors to remove them.

OEM Dodge Sprinter 2500 Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Bumper Covers found

View related parts
Dodge Sprinter 2500 Bumper Cover, White, Front Part Number: 1KR89P01AB
$127.80 MSRP: $733.00
You Save: $605.20 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 1GY41P01AA, 1KR89P01AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, White, Front Part Number: 1GY39P01AB
$129.20 MSRP: $741.00
You Save: $611.80 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 1GY39P01AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, White, Front Part Number: 1VB09P01AA
$278.90 MSRP: $457.00
You Save: $178.10 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Rear Part Number: 1HA78XDVAB
$174.87 MSRP: $254.00
You Save: $79.13 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: 1HA78XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Rear Part Number: 5104526AA
Product Specifications
- Other Name: Bumper - Fascia; Bumper Cover, Rear; Bumper Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Front Part Number: 5132494AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Rear Part Number: 5104512AA
Product Specifications
- Other Name: Bumper - Fascia; Bumper Cover, Rear; Bumper Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Front Part Number: 1VB09XDVAA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Front Part Number: 5104517AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Front Part Number: 5104513AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Cover Bumper Part Number: 5103917AA
Product Specifications
- Other Name: Stop/Bumper - Fuel Door; Fuel Door Bumper; Bumper Fuel Door
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Front Part Number: 1GY40XDVAA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, White, Front Part Number: 1GY40P01AA
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Rear Part Number: 1HA81XDVAB
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: 1HA81XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, White, Rear Part Number: 1HA78P01AA
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Rear Part Number: 1HA80XDVAA
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, White, Rear Part Number: 1HA80P01AA
Product Specifications
- Other Name: Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Rear Part Number: 1HA79XDVAA
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Front Part Number: 1KR89XDVAB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 1KR89XDVAA, 1GY41XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Bumper Cover, Gray, Front Part Number: 1GY39XDVAB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front
- Position: Front
- Replaces: 1GY39XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 Bumper Cover

Choose OEM Bumper Cover that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Bumper Cover follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Sprinter 2500 Bumper Cover Parts and Q&A

Bumper Cover, Gray, Rear
1HA81XDVAB
Q:
How to install a rear Bumper Cover on Dodge Sprinter 2500?
A:
Start by installing the Parktronic sensors 6, 7, 8 and 9. Make sure their retaining tabs reliably seat in the bumper cover. Afterward, connect the Parktronic wiring harness 4 to the bumper 1. Attach the upper sections 3 of the bumper corner to the bumper corners 2 and connect the bumper corners 2 to the bumper 1. Position the bumper 1 with bumper corners 2 on the vehicle and fasten the bumper 1 at collar bolts 3 to 9 Nm (80 in. lbs.). Join the wiring harness of the Parktronic sensor 9 electrical connector, and fit a new cable strap 7. Install the clips 9 at the lowest section of the bumper 1 and secure the bumper corner upper sections 6 on both sides, ensuring that they are fully seated. Affix mounting clips 5 to bumper corners 2. Connect the marker lamp electrical connector to protective strips 4, and install protective strips 4, ensuring clips are fully seated. Lastly, fix the protection strip screws on the wheel wells.
Bumper Cover, Gray, Rear
1HA78XDVAB
Q:
How to remove the rear Bumper Cover on Dodge Sprinter 2500?
A:
To remove the rear bumper cover, start by taking out the screw from the wheel well. Use a trim stick C-4755 or equivalent to separate the clips and protective strips on both the left and right sides. Disconnect the marker lamp electrical connector and remove the clips from the bumper corners. Loosen the upper sections of the bumper corners on both sides using the trim stick. Remove the clips at the bottom of the bumper and separate the cable strap. Disconnect the Parktronic sensor electrical connector, then open the rear doors and remove the collar bolts. Finally, take off the bumper along with the bumper corners. For disassembly, first remove the bumper, then detach the bumper corners from the bumper. Next, take off the upper sections from the bumper corners, separate the Parktronic wiring harness from the bumper, and release the retaining tabs from the rear Parktronic sensors to remove them.