How to Install a TPMS Sensor on Dodge Sprinter 2500?

Before installing the sensor, change the valve cap, valve core and sensor seal to securely seal the valve. Make the area behind the sensor/valve stem mounting hole in the wheel clean and undamaged. Pass the sensor into the wheel and maintain pressure against the rear of the metal valve stem. The potted part of the sensor should face out toward the wheel to protect it. Screw in the sensor nut while lightly holding the sensor in place to make it lie flush against the wheel and tighten the nut to 6 Nm (53 in. lbs.). Do not tighten the sensor excessively, as it could become loose from the valve stem and should be repaired right away. Hold the tire preventing device in place and then mount the tire following the manufacturer's directions, placing the sensor valve stem opposite the changer's head, for rotating wheel machines or opposite the end of the mount/dismount tool, for rotating tool tire changers. Put the wheel back on the vehicle, inflate it to the tire pressure shown on the Tire Inflation Pressure Label and then attach the original type valve stem cap to stop moisture getting in the sensor. Next, add the wheel and tire to the vehicle and finish by lowering the vehicle.

OEM Dodge Sprinter 2500 TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 TPMS Sensor found

View related parts
Dodge Sprinter 2500 Tire Pressure Sensor Part Number: 68038945AA
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; TPMS Sensor; Pressure Sensor
- Replaces: 68006771AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 TPMS Sensor

Choose OEM TPMS Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each TPMS Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Sprinter 2500 TPMS Sensor is a specific part that heavily influences the sturdiness and efficiency of the car and its ability to maintain a proper tire pressure. This TPMS Sensor is very useful in helping to avoid pointless accidents as well as helping to ensure better fuel consumption due to directly and real-time displaying the tire pressure to the driver. Designed to fit the Dodge Sprinter 2500 range of models or any other model in the car market today, the TPMS Sensor can pick pressure in any tire low and show each of the reading admired individually and this makes it crucial to ensure safety on the road. The Dodge Sprinter 2500 provides both the indirect and direct TPMS systems: the direct system that should be mentioned because of its battery-powered sensors fixed on the wheel that give an accurate signal about the state. This aspect is rather useful to drivers who consider fuel economy and safety of the vehicle a priority, because proper inflation level ensures both factors. Also, this performance engine part, Dodge Sprinter 2500 TPMS Sensor, is developed to negate usual valve-stem corrosion that could otherwise lead to frequent replacement of sensors. The market of automotive parts has specific brand value in the Dodge Sprinter 2500 TPMS Sensor with guaranteed reliability as the commercial drivers depend on vehicle for various uses. In conclusion, the Dodge Sprinter 2500 with its TPMS Sensor is a perfect representation of a well-built Dodge vehicle, so many will be confident in their choice of this make of light commercial vehicle.

Dodge Sprinter 2500 TPMS Sensor Parts and Q&A

Tire Pressure Sensor
68038945AA
Q: How to Install a TPMS Sensor on Dodge Sprinter 2500?
A:
Before installing the sensor, change the valve cap, valve core and sensor seal to securely seal the valve. Make the area behind the sensor/valve stem mounting hole in the wheel clean and undamaged. Pass the sensor into the wheel and maintain pressure against the rear of the metal valve stem. The potted part of the sensor should face out toward the wheel to protect it. Screw in the sensor nut while lightly holding the sensor in place to make it lie flush against the wheel and tighten the nut to 6 Nm (53 in. lbs.). Do not tighten the sensor excessively, as it could become loose from the valve stem and should be repaired right away. Hold the tire preventing device in place and then mount the tire following the manufacturer's directions, placing the sensor valve stem opposite the changer's head, for rotating wheel machines or opposite the end of the mount/dismount tool, for rotating tool tire changers. Put the wheel back on the vehicle, inflate it to the tire pressure shown on the Tire Inflation Pressure Label and then attach the original type valve stem cap to stop moisture getting in the sensor. Next, add the wheel and tire to the vehicle and finish by lowering the vehicle.