How to Install a Cooling Fan Assembly to Ensure Optimal Rear A/C System Performance on Dodge Sprinter 3500?

As each rear condenser air seal is necessary for proper rear A/C performance, check that each seal goes in the correct spot on the rear A/C condenser when you install the fan. When installing a new rear A/C condenser, be sure to place seals around its edge so that it seals properly with the rear condenser fan unit. Should they have been disconnected, reinstall the two condenser fan brackets. Fix the rear condenser fan unit onto the two condenser fan brackets and two condenser mounting brackets. Secure the fan unit on top of the vehicle with six washers and nuts, tighten well. Link the two wire harnesses at the rear condenser mount bracket. Then, mount the rear condenser cover flush with the vehicle and tighten the retaining screws to 2 Nm (17 in. lbs.). Afterward, secure the negative battery cable again.

How to Service a Cooling Fan Assembly for the Rear A/C Condenser on Dodge Sprinter 3500?

Service begins by disconnecting the negative battery cable, then lifting the cover of the rear A/C condenser housing. After that, remove the wire harness from the condenser fan suppression filter and undo the four bolts holding the rear A/C condenser fan to the top of the condensing unit. To get the fan out, turn it counterclockwise where it is held in the motor. Set the rear A/C condenser fan on the housing and turn it clockwise. Fit it with the four bolts and tighten them to 12 N.m (106 in. lbs.). Attach the condenser fan harness to the rear condenser fan suppression filter, join the negative battery cable and lastly put the cover over the rear A/C condenser housing.

OEM Dodge Sprinter 3500 Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

Filter by Part Type

Radiator Fan
Other Cooling Fan Assemblys

Filter by Part Type

7 Cooling Fan Assemblys found

View related parts
Dodge Sprinter 3500 Fan Blade Part Number: 68012413AA
$152.53 MSRP: $242.00
You Save: $89.47 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan Cooling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Sprinter 3500 | Base | 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 3500 Fan Part Number: 5103653AA
$728.98 MSRP: $924.12
You Save: $195.14 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Condenser; A/C, Auxiliary, Engine, and Radiator Cooling Fan Assembly.; Fan Condenser; A/C Condenser Fan
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 3500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 3500 Fan Blade Part Number: 68012412AA
$266.26 MSRP: $395.00
You Save: $128.74 (33%)
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan Cooling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 3500 | Base | 6 Cyl 3.0 L DIESEL
View related parts
Dodge Sprinter 3500 Fan Blade Part Number: 5136052AA
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan Cooling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Sprinter 3500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 3500 Fan Blade Part Number: 5117642AA
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan Cooling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Sprinter 3500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 3500 Fan Blade Part Number: 5103912AA
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Blade; Radiator Fan Assembly; Fan Cooling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Sprinter 3500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 3500 Fan Part Number: 68013666AA
Product Specifications
- Other Name: Radiator Fan Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 3500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 3500 Cooling Fan Assembly

Choose OEM Cooling Fan Assembly that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Cooling Fan Assembly follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Sprinter 3500 Cooling Fan Assembly functions as a critical element which reinforces the reliability together with performance capabilities of Dodge Sprinter 3500 vehicles. The Cooling Fan Assembly functions as a thermostat to direct critical air flow through the radiator thus cooling approaching engine coolant before its reintroduction. From 2003 until 2009 Dodge Sprinter 3500 vehicles relied primarily on electric cooling fans to deliver superior performance as well as better efficiency than their older mechanical predecessors. Engine safety and optimal performance remain possible because the Cooling Fan Assembly effectively stops engine overheating. This Cooling Fan Assembly fits multiple Dodge Sprinter 3500 models which makes it a suitable choice for all owners with different product variants. This Dodge Sprinter 3500 Cooling Fan Assembly brings together a resilient fan blade with its sturdy mounting shroud and potent motor which are located by the radiator to maximize its cooling power. Engine cooling capabilities of this assembly enhance fuel efficiency which delivers about 25 mpg fuel consumption. The car Cooling Fan Assembly provides exceptional market recognition through its durable performance and this makes it crucial for the automaker model longevity maintenance and safety.

Dodge Sprinter 3500 Cooling Fan Assembly Parts and Q&A

Fan Blade
68012412AA
Q:
How to Install a Cooling Fan Assembly to Ensure Optimal Rear A/C System Performance on Dodge Sprinter 3500?
A:
As each rear condenser air seal is necessary for proper rear A/C performance, check that each seal goes in the correct spot on the rear A/C Condenser when you install the fan. When installing a new rear A/C condenser, be sure to place seals around its edge so that it seals properly with the rear condenser fan unit. Should they have been disconnected, reinstall the two condenser fan brackets. Fix the rear condenser fan unit onto the two condenser fan brackets and two condenser mounting brackets. Secure the fan unit on top of the vehicle with six washers and nuts, tighten well. Link the two wire harnesses at the rear condenser mount bracket. Then, mount the rear condenser cover flush with the vehicle and tighten the retaining screws to 2 Nm (17 in. lbs.). Afterward, secure the negative Battery Cable again.
Fan
5103653AA
Q:
How to Service a Cooling Fan Assembly for the Rear A/C Condenser on Dodge Sprinter 3500?
A:
Service begins by disconnecting the negative Battery Cable, then lifting the cover of the rear A/C condenser housing. After that, remove the wire harness from the condenser fan suppression filter and undo the four bolts holding the rear A/C condenser fan to the top of the condensing unit. To get the fan out, turn it counterclockwise where it is held in the motor. Set the rear A/C condenser fan on the housing and turn it clockwise. Fit it with the four bolts and tighten them to 12 N.m (106 in. lbs.). Attach the condenser fan harness to the rear condenser fan suppression filter, join the negative battery cable and lastly put the cover over the rear A/C condenser housing.