How to install the Crankshaft Position Sensor on Dodge Sprinter 3500?

In order to complete crankshaft position sensor installation, clean the crankshaft sensor bore and install the sensor replacing the bolt (9 Nm; 80 in. lbs.) Next, attach the engine harness connector and fit the heat shield. After that, lower the vehicle and attach the negative battery cable.

How to service the Crankshaft Position Sensor on Dodge Sprinter 3500?

To serve the Crankshaft Position Sensor, first, disconeect the negative battery cable then unplug crankshaft wiring harness connector. Take out the sensor after removing the retaining bolt of the crankshaft sensor. To install, insert the crankshaft position sensor into the access hole before installing the retaining bolt and tightening to 80 lbs. Within. (9 Newton Metres). Now you will connect the crankshaft position sensor wiring harness connector, and reconnect the negative battery cable.

OEM Dodge Sprinter 3500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
Dodge Sprinter 3500 Crankshaft Position Sensor Part Number: 68039478AC
$108.60 MSRP: $162.00
You Save: $53.40 (33%)
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Sensor, Revolutions Per Minute; Crankshaft Sensor
- Replaces: 5175763AA, 5175763AB, 68039478AA, 68039478AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 3500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 3500 Crankshaft Position Sensor Part Number: 5080352AA
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; RPM Sensor; Engine Management.; Sensor Crankshaft Position; Sensor Crankshaft
- Replaces: 5080350AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 3500 | Base | 2.7L L5, 5 Cyl 2.7 L DIESEL

Dodge Sprinter 3500 Crankshaft Position Sensor

Choose OEM Crankshaft Position Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Crankshaft Position Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Sprinter 3500 Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
68039478AC
Q:
How to install the Crankshaft Position Sensor on Dodge Sprinter 3500?
A:
In order to complete crankshaft position sensor installation, clean the crankshaft sensor bore and install the sensor replacing the bolt (9 Nm; 80 in. lbs.) Next, attach the engine harness connector and fit the heat shield. After that, lower the vehicle and attach the negative battery cable.
Crankshaft Position Sensor
5080352AA
Q:
How to service the Crankshaft Position Sensor on Dodge Sprinter 3500?
A:
To serve the Crankshaft Position Sensor, first, disconeect the negative battery cable then unplug crankshaft wiring harness connector. Take out the sensor after removing the retaining bolt of the crankshaft sensor. To install, insert the crankshaft position sensor into the access hole before installing the retaining bolt and tightening to 80 lbs. Within. (9 Newton Metres). Now you will connect the crankshaft position sensor wiring harness connector, and reconnect the negative battery cable.