How to Service and Repair a Leaf Spring Shackle on Dodge Sprinter 3500?

First support the vehicle and then raise the rear axle to service and repair the spring shackle. Remove the rear spring shackles out of the spring bracket and while the axle is down, take the rear spring shackle from the spring. When installing, clamp the spring shackle to the spring and set the tightness at 90 Nm (66 ft. lbs.). As you lift the rear axle, slide the spring shackle onto the bracket and tighten it to 85 Nm (63 ft. lbs.). Make sure to lower the vehicle.

How to Install a Leaf Spring Shackle on Dodge Sprinter 3500?

The spring shackle (8) should first be attached to the spring (2) and the nuts (5) and bolts (6) should be tightened according to the torque specification chart. Then raise the rear axle (10) and attach the spring shackle (8) to the spring bracket and torque the nuts (5) and bolts (6) to 90 Nm (66 foot. pounds) for SRW and 185 Nm (136 foot. pounds) for DRW. Finally you lower the vehicle.

OEM Dodge Sprinter 3500 Leaf Spring Shackle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Leaf Spring Shackles found

View related parts
Dodge Sprinter 3500 Shackle, Rear Part Number: 5118653AA
Product Specifications
- Other Name: Shackle - Spring; Leaf Spring Shackle, Rear; Shackle Spring; Leaf Spring Shackle
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Sprinter 3500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 3500 Shackle, Rear Part Number: 5118655AA
Product Specifications
- Other Name: Shackle - Spring; Leaf Spring Bracket, Rear; Leaf Spring Shackle, Rear; Shackle Spring; Leaf Spring Shackle
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Sprinter 3500 | Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 3500 Leaf Spring Shackle

Choose OEM Leaf Spring Shackle that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Leaf Spring Shackle follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Sprinter 3500 Leaf Spring Shackle is an important writing suspension parts that provide the equipment with reliable suspension system. This Leaf Spring Shackle links the formed and Machined new Leaf Spring to the section of the Dodge Sprinter 3500's frame to accommodate any needed flex and additional elongation thus ensuring proper tire contact with the ground. The Dodge Sprinter 3500 was manufactured between 2003 and 2009, and the compatibility with several models guarantees the satisfaction with the Leaf Spring Shackle throughout the construction's range. A factory installed shackles may corrode, or even break down over time, and thus, to avoid the compromise of overall productivity, and in equal measure, safety, replacement with superior quality Leaf Spring Shackles is compulsory. Dodge Sprinter 3500 Leaf Spring Shackle has different types depending on the rigidity it can either be the regular, rear, boomerang or even the heavy-duty ones depending on what is required of the car. Pointedly, these shackles can help control the level of ground clearance and lift height according to the user's preference. Dodge Sprinter 3500 model is known to have fuel economy of roughly 25 mpg and 5000 pound towing capacity, this means that the Leaf Spring Shackle helps in the enhancement of these features. The Dodge Sprinter 3500 Leaf Spring Shackle is quite outstanding given its constructiveness and design thus likely to make sure that various drivers can have confidence in their automobiles when it comes to performance and safety on the roads.

Dodge Sprinter 3500 Leaf Spring Shackle Parts and Q&A

Shackle, Rear
5118653AA
Q: How to Service and Repair a Leaf Spring Shackle on Dodge Sprinter 3500?
A:
First support the vehicle and then raise the rear axle to service and repair the spring shackle. Remove the rear spring shackles out of the spring bracket and while the axle is down, take the rear spring shackle from the spring. When installing, clamp the spring shackle to the spring and set the tightness at 90 Nm (66 ft. lbs.). As you lift the rear axle, slide the spring shackle onto the bracket and tighten it to 85 Nm (63 ft. lbs.). Make sure to lower the vehicle.
Shackle, Rear
5118655AA
Q: How to Install a Leaf Spring Shackle on Dodge Sprinter 3500?
A:
The spring shackle (8) should first be attached to the spring (2) and the nuts (5) and bolts (6) should be tightened according to the torque specification chart. Then raise the rear axle (10) and attach the spring shackle (8) to the spring bracket and torque the nuts (5) and bolts (6) to 90 Nm (66 foot. pounds) for SRW and 185 Nm (136 foot. pounds) for DRW. Finally you lower the vehicle.