OEM Dodge Sprinter 3500 Steering Wheel

Dodge Sprinter 3500 Steering Wheel Parts and Q&A

• Steering Wheel
  5ZE23DX9AA
  Q: How to Install a Steering Wheel and Ensure It Functions Properly on Dodge Sprinter 3500?

  A:

  When installing the steering wheel, match up the marks on the wheel with the marks on the shaft of the steering column. First, put the steering wheel on the column and tighten the bolt to 80 Nm (59 ft lbs.). After that, fit the Air Bag module and connect the negative Battery Cable to the ground cable. Then, go back to the setup menu, reset all timings and encode your radio. After that, take the vehicle for a road test to determine where the steering wheel lies.
• Steering Wheel
  ZF45BD1AA
  Q: How to Maintain Your Steering Wheel on Dodge Sprinter 3500?

  A:

  Before servicing the steering wheel, first take out the ground cable from the battery and get the Air Bag module out of the wheel. Try to point the steering wheel forward, then remove the bolt and lift out the steering wheel from the column. Once the wheel is back in place, tighten it to the column with the bolt; the recommended torque is 80 Nm (59 ft. lbs.). Put the air bag module back in, link the battery ground cable, regulate all the times and encode your radio. Don't forget to take your car out for a drive and make sure the steering wheel feels just right.