OEM Dodge Sprinter 3500 Water Pump

Dodge Sprinter 3500 Water Pump Parts and Q&A

• Water Pump
  68084803AA
  Q: How to Effectively Remove and Replace a Water Pump on Dodge Sprinter 3500?

  A:

  Before changing the water pump, remove the negative cables from the main battery and the starter battery found inside the vehicle and use the One Step Battery Analyzer and Charger from OTC when testing. Subsequent to this, pull out the air box and engine cover and let the cooling liquid drain out. After removing the fan and shroud, notice that the radiator fan assembly is secured to the fan pulley and the radiator air flow fan uses reverse threading. After you're done, remove the fan Drive Belt, the serpentine belt and the oil dipstick retaining bolt. Proceed by detaching the generator and the lower charge air cooler hose and remove the EGR airflow valve assembly. After that, unfasten the bolts holding the water pump in place, take out the water pump and remove the gasket. Inspect both your clamps and hoses often and change any that are damaged and be careful not to suffer scalding or poisoning when working with coolant.
• Water Pump
  68087367AB
  Q: How to Install a Water Pump in an Engine on Dodge Sprinter 3500?

  A:

  When putting on the water pump, start by wiping clean all connecting areas, slide the water pump and its gasket into place on the engine block and fasten the bolts to 14 Nm (10 ft lbs). Third, put in the EGR airflow valve assembly, next the oil dipstick retaining bolt and finally the lower charge air cooler hose. Following installation of the generator, install the serpentine belt (1) and fan Drive Belt (2). Following that, set up the fan and shroud, making sure the radiator's fan assembly is connected with the fan pulley by turning the mounting nut clockwise, as its threads are reverse. Install the engine cover and then connect the air box assembly. Under the instrument panel nearby the accelerator pedal, first attach the AGM starter negative Battery Cable and then the negative battery cable. After that, let the air out of the system, replace it with proper fluid and search for any leaks in the cooling system.