How to Service and Repair a Brake Proportioning Valve on Dodge Stratus?

Repairing and servicing the brake proportioning valve on vehicles without antilock brakes means first removing the brake line from the valve that regulates the rear wheel, then taking out the valve itself. When installing, fit the valve in the rear line and make sure both nuts are seated on it by hand tightening fully. Also, tighten the two brake line tube nuts at the proportioning valve to a torque of 17 Nm (145 inch lbs.), then bleed the affected brake line.

How to Maintain and Fix a Brake Proportioning Valve with Antilock Brakes on Dodge Stratus?

Begin the brake proportioning/combination valve service by looking at and following service conditions and warnings. Restricted valves should not be taken apart for any reason. Removing the chassis brake from the rear wheel proportioning valve controls the initial premature wheel skid. The proportioning valve must be handled with the wrench, not the adapter fitting, because the adapter must not be detached. After that, take out the proportioning valve from the brake flex hose. To install, secure the proportioning valve to the brake flex hose and tighten it to a torque of 17 Nm (or 145 inch lbs.). The brake tube should be linked to the proportioning valve and all tube nuts need to have 17 Nm (145 inch lbs.) of tightening pressure. When all is in place, bleed the defective line and observe the recommendations.

OEM Dodge Stratus Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Proportioning Valves found

View related parts
Dodge Stratus Proportioner Valve Part Number: 4695745
$44.52 MSRP: $65.30
You Save: $20.78 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Proportioning; Valve Assembly, Propeller Primary (Screw In); Valve Proportioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Window Motor, Passenger Side Part Number: 4695649
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Proportioner Valve; Motor; Valve Assembly, Propeller Primary (Screw In); Valve Proportioning
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Pressure Metering Valve Part Number: MB699554
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve; Valve, Brake Fluid Proportioning; Valve Proportioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Pressure Metering Valve Part Number: MB699551
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve; Valve, Proportioning; Valve Proportioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Dodge Stratus Brake Proportioning Valve

Choose OEM Brake Proportioning Valve that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Proportioning Valve follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

One such spare part is the Dodge Stratus Brake Proportioning Valve, and as the name suggests, it goes for the various models of the Dodge Stratus that was manufactured between the years 1995 and 2005. This valve does an amazing job of controlling pressure on the various brake lines in the car, they only allow the rear drum brakes to be activated after the front disc brakes when there is need to for an extremely hard and fast stop. This particular safety addition not only increases the effective brake area but also stability when controlling the car and especially in situations that require the most urgent avoidance of and collision and therefore makes Dodge Stratus a very reliable car. Appealing to both the first and second generation Dodge Stratus, the Brake Proportioning Valve aims in providing a highly effective braking even in tough traffic situations safely. So when one borrows the Dodge Stratus for a ride, one is assured of an energetic engine and efficiency aside from the Brake Proportioning Valve that offers smooth and proportional brake on the car. Further, the possibility to change the pressure of Brake line distinguishes the valve in the automotive market and it proves that Dodge cares about the safety of drivers and their vehicles. Dodge Stratus Brake Proportioning Valve is yet another perfect tong that conferred directly upon the Dodge Stratus for its uncomplaining performance, durability and reasonable price that can transmit the prime burning point to the brake system of the car as per the client's requirement and give the potentiality to optimize the burning zone with a stress-free braking system.

Dodge Stratus Brake Proportioning Valve Parts and Q&A

Proportioner Valve
4695745
Q: How to Service and Repair a Brake Proportioning Valve on Dodge Stratus?
A:
Repairing and servicing the brake proportioning valve on vehicles without antilock brakes means first removing the brake line from the valve that regulates the rear wheel, then taking out the valve itself. When installing, fit the valve in the rear line and make sure both nuts are seated on it by hand tightening fully. Also, tighten the two brake line tube nuts at the proportioning valve to a torque of 17 Nm (145 inch lbs.), then bleed the affected brake line.
Window Motor, Passenger Side
4695649
Q: How to Maintain and Fix a Brake Proportioning Valve with Antilock Brakes on Dodge Stratus?
A:
Begin the brake proportioning/combination valve service by looking at and following service conditions and warnings. Restricted valves should not be taken apart for any reason. Removing the chassis brake from the rear wheel proportioning valve controls the initial premature wheel skid. The proportioning valve must be handled with the wrench, not the adapter fitting, because the adapter must not be detached. After that, take out the proportioning valve from the brake flex hose. To install, secure the proportioning valve to the brake flex hose and tighten it to a torque of 17 Nm (or 145 inch lbs.). The brake tube should be linked to the proportioning valve and all tube nuts need to have 17 Nm (145 inch lbs.) of tightening pressure. When all is in place, bleed the defective line and observe the recommendations.